Merge branch 'main' into test/session-outcome-seam

Stop a permission answer starting a second conversion

CLAUDE.md

@@ -184,11 +184,29 @@ install for code that can never run — and on API 37 the full APK does not fit
   - **coverage gaps** — the line never executes. Filtered to sites where JaCoCo reports `mi > 0`, a
     concrete instruction no test runs, which is what separates a real gap from a partial branch on
     a compound condition. That filter cut the candidate list roughly in half and was right to.
+    **Wave 4 found it wrong in both directions, though — use the two filters below instead.**
   - **assertion gaps** — JaCoCo is green and nothing checks the answer. `MainActivity`'s rail and
     bottom bar were both *executed* by `AppRootRestorationTest` and **transposing them passed the
     entire suite**; so did swapping the two progress-notification strings, and swapping `Content`'s
     two destinations. No coverage number would ever have found any of the three.
 
+  **Wave 4 (2026-09-02) corrected that first filter, and the correction is the reusable part.**
+  `mi > 0` fails in both directions. It *over-reports* on Compose: `JoinScreen.kt:222` reads
+  `mi=10` and also `ci=38`, and `JoinStateAffordancesTest` already clicks that Save button and
+  asserts `save:joined.mp4` — the missed instructions are the synthesized `$changed`/`$dirty`
+  recomposition-skip path, the same codegen this file already warns about for *branch* counts,
+  showing up in the instruction count too. And it *under-reports* on warm methods with cold arms:
+  `ConversionViewModel.cancel()` misses no line, yet `activeWorkId?.let(...)` had only ever been
+  entered on the null side in 584 tests. Use two filters together instead:
+
+  - **`ci == 0`** — the line never executed. This is JaCoCo's own missed-line definition, so it
+    totals exactly the reported missed-line count and needs no judgement.
+  - **`ci > 0 && mb > 0` at method level** — a covered method with an arm nothing takes. This is
+    the only one that finds the `cancel()` shape.
+
+  Of wave 4's 251 missed branches, just **18** sat on lines that do execute, so the branch gap and
+  the line gap are largely the same gap; the second filter is about which of them are reachable.
+
   So **every ticket named the mutation that had to go red, and that was its acceptance criterion
   rather than a coverage delta**. It caught **two vacuous tests written in the same session**,
   before either shipped:
@@ -236,6 +254,35 @@ install for code that can never run — and on API 37 the full APK does not fit
 
   And **re-measure before quoting**: this entry was once written quoting 81.4%, measured four hours
   earlier, and was already three points stale by the time it was ready to merge.
+
+  **Wave 4's read (2026-09-02) moved no number at all, and that is its result.** It was a triage
+  rather than a test push: twelve tickets (**#192-#203**), four deferred candidates (**#204**), and
+  five findings (**F6-F10** in `docs/coverage-read-findings.md`). What it establishes is the shape
+  of what is left, which is different again from wave 3's:
+
+  - Of 169 never-executed lines, **81 are native or device edges and stay that way** —
+    `FFmpegEngine` 33, `Media3Engine` 24, `ConcatEngine` 14, `MainActivity.onCreate` 10 — their
+    zeroes being the `testDebugUnitTest`-only measurement boundary that #84, #85, #86 and #88 each
+    recorded before. A further **34 are device-bound only until a seam moves them**:
+    `AndroidDeviceCodecs` 20 (#194) and the 14 of `MediaProbe`'s 26 that are `readMediaInformation`
+    (#195). Do not read that second group as exempt — the two tickets exist because it is not.
+  - Most of the rest is **already closed with a reason on record**, or compiler-generated: default-arg
+    bridges, DI factory lambdas, synthetic `NoWhenBranchMatchedException` arms, coroutine completion.
+  - Six of the ten findings in that document are now "no action" or "not a test gap". By this point
+    the report's remaining red is mostly arms nothing can reach, members nothing calls, and arms a
+    test *can* reach but cannot pin — and a coverage number tells none of them apart.
+
+  **The biggest single gap it found was not a missed line.** `ConversionViewModel.cancel()` and
+  `JoinViewModel.cancel()` report every line covered; only the null arm of
+  `activeWorkId?.let(workManager::cancelWorkById)` had ever been entered, so nothing in 584 tests
+  connected the Cancel button to WorkManager (#192). That is what the second filter above is for.
+
+  It also re-opened a mechanism, not a close: #86 and #133 ruled `AndroidDeviceCodecs.probe()` out
+  **through `ShadowMediaCodecList`**, on the grounds that the builder cannot set `isAlias` or
+  `canonicalName`. A pure seam does not have that constraint, and #133 did not evaluate one. Read
+  #194 before re-arguing either way — and note the reason it is worth cutting is not coverage but
+  that the `runCatching` fallback logs "assuming permissive" while returning empty sets, which makes
+  `canEncode` and `canDecode` answer *no* for everything.
 - **Testable code is not done until it is tested.** If a piece is unit testable, it gets unit
   tests before it counts as done. If it is e2e testable, it gets e2e tests. Both clauses apply —
   a change that is both needs both.

app/src/main/java/org/libremediaconverter/codec/AndroidDeviceCodecs.kt

@@ -21,6 +21,11 @@ import org.libremediaconverter.model.VideoCodec
  *   words, "cannot be tested for correctness". It is a hint, not a guarantee, which is
  *   why the router treats a failed hardware export as a signal to fall back rather
  *   than trusting this up front.
+ * - **An enumeration that fails answers no to everything**, which sends every job to
+ *   FFmpeg. Empty sets are not a permissive default: `canEncode` looks a MIME type up in
+ *   [hardwareEncodeMimes] and finds nothing there. That is the intended answer — FFmpeg
+ *   can do whatever Media3 can, only slower — but it is the opposite of what this class
+ *   said until #194, so it is written down rather than left to be re-derived.
  */
 class AndroidDeviceCodecs private constructor(
     private val hardwareEncodeMimes: Set<String>,
@@ -46,22 +51,62 @@ class AndroidDeviceCodecs private constructor(
 
         fun get(): AndroidDeviceCodecs = cached ?: synchronized(this) { cached ?: probe().also { cached = it } }
 
-        private fun probe(): AndroidDeviceCodecs {
+        /**
+         * One entry of the platform's codec list, reduced to what the rules below read.
+         *
+         * The five booleans and the type list are the whole of what [capabilitiesFrom] needs, and
+         * none of them can be set on a `MediaCodecInfo` from a test: Robolectric ships
+         * `MediaCodecInfoBuilder`, but it has no `setIsAlias` and no `setCanonicalName`, which is
+         * exactly the objection #133 raised against reaching this code through
+         * `ShadowMediaCodecList`. That objection is about the shadow. It does not apply to a
+         * function that takes its own entry type, which is why this exists.
+         */
+        internal data class CodecEntry(
+            val canonicalName: String,
+            val isAlias: Boolean,
+            val isEncoder: Boolean,
+            val isHardwareAccelerated: Boolean,
+            val isSoftwareOnly: Boolean,
+            val supportedTypes: List<String>,
+        )
+
+        /**
+         * The enumeration rules, over entries a caller chooses.
+         *
+         * [probe] is the only production caller and supplies the real codec list; a test supplies
+         * its own, which is the point — the two rules this class's KDoc calls out as easy to get
+         * wrong, the alias skip and the canonical-name dedup, are unreachable any other way.
+         *
+         * **`enumerate` returns a `Sequence`, deliberately.** The `runCatching` has to wrap the
+         * *iteration* rather than a list built before it, because a `MediaCodecInfo` whose
+         * properties throw does so partway through — and when that happens the codecs already read
+         * are kept. Taking a `List` here would move that throw outside the loop and silently turn a
+         * partial answer into an empty one. That behaviour predates this seam; a `List` parameter
+         * would have changed it as a side effect of a refactor.
+         *
+         * **An enumeration that fails answers restrictively, and that is deliberate.** The sets
+         * come back empty, and `"video/avc" in emptySet()` is `false`, so [canEncode] and
+         * [canDecode] both answer no and every job routes to FFmpeg. FFmpeg can do everything
+         * Media3 can, only slower, so refusing the hardware path is the safe reading of "we could
+         * not find out what this device supports". This used to log "assuming permissive", which
+         * described the opposite of what the code does.
+         */
+        internal fun capabilitiesFrom(enumerate: () -> Sequence<CodecEntry>): AndroidDeviceCodecs {
             val encoders = mutableSetOf<String>()
             val decoders = mutableSetOf<String>()
             val seen = mutableSetOf<String>()
 
             runCatching {
-                MediaCodecList(MediaCodecList.REGULAR_CODECS).codecInfos.forEach { info ->
+                enumerate().forEach { entry ->
                     // Aliases point at the same underlying codec; counting both would
                     // double-count capabilities.
-                    if (info.isAlias) return@forEach
-                    if (!seen.add(info.canonicalName)) return@forEach
+                    if (entry.isAlias) return@forEach
+                    if (!seen.add(entry.canonicalName)) return@forEach
 
-                    info.supportedTypes.forEach { mime ->
+                    entry.supportedTypes.forEach { mime ->
                         if (!mime.startsWith("video/")) return@forEach
-                        if (info.isEncoder) {
-                            if (info.isHardwareAccelerated && !info.isSoftwareOnly) {
+                        if (entry.isEncoder) {
+                            if (entry.isHardwareAccelerated && !entry.isSoftwareOnly) {
                                 encoders += mime
                             }
                         } else {
@@ -69,12 +114,32 @@ class AndroidDeviceCodecs private constructor(
                         }
                     }
                 }
-            }.onFailure { Log.w(TAG, "Codec enumeration failed; assuming permissive.", it) }
+            }.onFailure { Log.w(TAG, "Codec enumeration failed; routing everything to FFmpeg.", it) }
 
             Log.i(TAG, "Hardware video encoders: $encoders")
             return AndroidDeviceCodecs(encoders, decoders)
         }
 
+        /**
+         * The thin edge: the real codec list, mapped onto [CodecEntry] one at a time.
+         *
+         * Lazily, so a property that throws does it inside [capabilitiesFrom]'s `runCatching` and
+         * on the entry that caused it — see that function's note on why the parameter is a
+         * `Sequence`.
+         */
+        private fun probe(): AndroidDeviceCodecs = capabilitiesFrom {
+            MediaCodecList(MediaCodecList.REGULAR_CODECS).codecInfos.asSequence().map { info ->
+                CodecEntry(
+                    canonicalName = info.canonicalName,
+                    isAlias = info.isAlias,
+                    isEncoder = info.isEncoder,
+                    isHardwareAccelerated = info.isHardwareAccelerated,
+                    isSoftwareOnly = info.isSoftwareOnly,
+                    supportedTypes = info.supportedTypes.toList(),
+                )
+            }
+        }
+
         /**
          * `internal` rather than `private` so the cross-check test can ask what a [VideoCodec]
          * means here and compare it with what [NAME_TO_MIME] says the same codec's names mean.

app/src/main/java/org/libremediaconverter/convert/ConversionViewModel.kt

@@ -673,13 +673,23 @@ class ConversionViewModel @JvmOverloads constructor(
         else -> null
     }
 
-    private fun currentInput(): InputFile? = when (val s = _state.value) {
-        is ConversionState.Ready -> s.input
-        is ConversionState.Converting -> s.input
-        is ConversionState.Waiting -> s.input
-        is ConversionState.Converted -> s.input
-        else -> null
-    }
+    /**
+     * The input `convert()` may act on, which is only ever the one on a `Ready` screen.
+     *
+     * This used to answer for `Converting`, `Waiting` and `Converted` as well. Those arms were not
+     * reachable by tapping Convert -- the button renders only in the `Ready` branch -- but they
+     * were reachable through the POST_NOTIFICATIONS **result**, which `ConverterScreen.kt:91` wires
+     * to `convert()` rather than to the button. Reaching one of them enqueued a *second* job over a
+     * live one: `activeWorkId` was overwritten, and the first job kept running with its foreground
+     * notification orphaned and nothing left holding its id to cancel it.
+     *
+     * Narrowed under #202 rather than tested as it stood, because a test written against the old
+     * shape would have frozen the double-enqueue as intended behaviour -- the F1/F5 failure mode.
+     *
+     * `JoinViewModel.join()` has been `(_state.value as? JoinState.Ready)?.inputs ?: return` all
+     * along. The two screens are the same shape and only one of them was over-general.
+     */
+    private fun currentInput(): InputFile? = (_state.value as? ConversionState.Ready)?.input
 
     private companion object {
         /**

app/src/main/java/org/libremediaconverter/convert/MediaProbe.kt

@@ -221,12 +221,39 @@ object MediaProbe {
         null
     }
 
-    private fun readMediaInformation(path: String): FFprobeInfo? {
-        // ffmpeg-kit-next is compiled from Kotlin with private backing fields, so these have to go
-        // through the Java getters rather than property syntax.
-        val info: MediaInformation = FFprobeKit.getMediaInformation(path).getMediaInformation()
-            ?: return null
+    /**
+     * The thin edge: spawn FFprobe, hand what it said to [ffprobeInfoFrom].
+     *
+     * Everything device-bound is on this line and the null check under it. What FFprobe *said* is a
+     * `MediaInformation`, which is an ordinary object over a `JSONObject` — so the reading of it is
+     * a decision a test can choose the inputs for, and it lives below rather than here.
+     */
+    private fun readMediaInformation(path: String): FFprobeInfo? =
+        FFprobeKit.getMediaInformation(path).getMediaInformation()?.let(::ffprobeInfoFrom)
 
+    /**
+     * What FFprobe's answer means, as a function of the answer alone.
+     *
+     * `internal` for the same reason [Extracted] and [FFprobeInfo] are: a test cannot name it
+     * otherwise, and the JVM test source set is a friend of `main`.
+     *
+     * **JVM-safe, verified rather than assumed.** `javap` over the committed AAR's runtime jar:
+     * `MediaInformation(JSONObject, List<StreamInformation>, List<Chapter>)` and
+     * `StreamInformation(JSONObject)` are plain public constructors, and neither class's `<clinit>`
+     * touches the native library — so a test builds its own without `libffmpegkit` being present.
+     * That is the whole reason this split is worth making: `readMediaInformation` was 114 missed
+     * instructions and 24 missed branches, of which exactly one line needed a device.
+     *
+     * The subtle part is the **second argument to [containerFrom]**. `matroska,webm` is reported
+     * for both MKV and WebM — they share a demuxer — so the video codec is the only thing that
+     * separates them, and dropping it silently turns every VP9 WebM into an MKV. `containerFrom`
+     * has thirty-three covered branches of its own and none of them can notice that, because the
+     * mistake is at the call rather than in the callee.
+     *
+     * ffmpeg-kit-next is compiled from Kotlin with private backing fields, so these go through the
+     * Java getters rather than property syntax.
+     */
+    internal fun ffprobeInfoFrom(info: MediaInformation): FFprobeInfo {
         val streams = info.getStreams().orEmpty()
         val video = streams.firstOrNull { it.getType() == "video" }
         val audio = streams.firstOrNull { it.getType() == "audio" }

app/src/main/java/org/libremediaconverter/ffmpeg/ConcatEngine.kt

@@ -5,7 +5,6 @@ import android.net.Uri
 import android.util.Log
 import com.arthenica.ffmpegkit.FFmpegKit
 import com.arthenica.ffmpegkit.FFmpegKitConfig
-import com.arthenica.ffmpegkit.ReturnCode
 import kotlinx.coroutines.suspendCancellableCoroutine
 import org.libremediaconverter.convert.ConcatJoiner
 import org.libremediaconverter.convert.MediaProbe
@@ -66,16 +65,16 @@ class ConcatEngine(private val context: Context) : ConcatJoiner {
     private suspend fun execute(args: List<String>) = suspendCancellableCoroutine { cont ->
         Log.i(TAG, "ffmpeg ${args.joinToString(" ")}")
         val session = FFmpegKit.executeWithArgumentsAsync(args.toTypedArray()) { completed ->
-            val rc = completed.getReturnCode()
-            when {
-                ReturnCode.isSuccess(rc) -> cont.resume(Unit)
-                ReturnCode.isCancel(rc) -> cont.cancel()
-                else -> cont.resumeWithException(
-                    FFmpegEngine.FFmpegException(
-                        "Joining failed (${rc?.value}): " +
-                            completed.getAllLogsAsString(LOG_TAIL_LIMIT).orEmpty(),
-                    ),
-                )
+            val outcome = sessionOutcome(
+                rc = completed.getReturnCode(),
+                prefix = "Joining",
+                failStackTrace = { completed.getFailStackTrace() },
+                logTail = { completed.getAllLogsAsString(LOG_TAIL_LIMIT) },
+            )
+            when (outcome) {
+                SessionOutcome.Success -> cont.resume(Unit)
+                SessionOutcome.Cancelled -> cont.cancel()
+                is SessionOutcome.Failed -> cont.resumeWithException(FFmpegEngine.FFmpegException(outcome.message))
             }
         }
         cont.invokeOnCancellation { FFmpegKit.cancel(session.getSessionId()) }

app/src/main/java/org/libremediaconverter/ffmpeg/FFmpegEngine.kt

@@ -4,7 +4,6 @@ import android.util.Log
 import com.arthenica.ffmpegkit.FFmpegKit
 import com.arthenica.ffmpegkit.FFmpegKitConfig
 import com.arthenica.ffmpegkit.Level
-import com.arthenica.ffmpegkit.ReturnCode
 import kotlinx.coroutines.suspendCancellableCoroutine
 import org.libremediaconverter.convert.SoftwareTranscoder
 import org.libremediaconverter.model.ConversionRequest
@@ -51,19 +50,16 @@ class FFmpegEngine : SoftwareTranscoder {
         val session = FFmpegKit.executeWithArgumentsAsync(
             args.toTypedArray(),
             { completed ->
-                val rc = completed.getReturnCode()
-                when {
-                    ReturnCode.isSuccess(rc) -> cont.resume(Unit)
-                    ReturnCode.isCancel(rc) ->
-                        cont.cancel()
-                    else -> cont.resumeWithException(
-                        FFmpegException(
-                            "FFmpeg failed (${rc?.value}): " +
-                                completed.getFailStackTrace().orEmpty().ifBlank {
-                                    completed.getAllLogsAsString(LOG_TAIL_LIMIT).orEmpty()
-                                },
-                        ),
-                    )
+                val outcome = sessionOutcome(
+                    rc = completed.getReturnCode(),
+                    prefix = "FFmpeg",
+                    failStackTrace = { completed.getFailStackTrace() },
+                    logTail = { completed.getAllLogsAsString(LOG_TAIL_LIMIT) },
+                )
+                when (outcome) {
+                    SessionOutcome.Success -> cont.resume(Unit)
+                    SessionOutcome.Cancelled -> cont.cancel()
+                    is SessionOutcome.Failed -> cont.resumeWithException(FFmpegException(outcome.message))
                 }
             },
             { log -> Log.d(TAG, log.message.trimEnd()) },

app/src/main/java/org/libremediaconverter/ffmpeg/SessionOutcome.kt

@@ -0,0 +1,54 @@
+package org.libremediaconverter.ffmpeg
+
+import com.arthenica.ffmpegkit.ReturnCode
+
+/**
+ * What a finished FFmpegKit session means, as a function of its return code.
+ *
+ * Both engines had their own copy of this `when`, twelve lines apart in two files, and the copies
+ * had drifted: [FFmpegEngine] preferred the fail stack trace and fell back to the log tail, while
+ * [ConcatEngine] only ever read the log tail. Neither was tested — both live inside a callback
+ * handed to `FFmpegKit`, which does not run on the JVM — so the divergence was invisible.
+ *
+ * #203 decided to unify on the stack trace, so a join failure now carries the diagnostics a
+ * conversion failure always did. The *prefix* stays per-engine: unifying the strategy must not
+ * unify the sentence, since "FFmpeg failed" and "Joining failed" describe different jobs.
+ */
+internal sealed interface SessionOutcome {
+
+    /** rc 0. The suspension resumes normally. */
+    data object Success : SessionOutcome
+
+    /** rc 255. The suspension is cancelled rather than failed — the user asked for this. */
+    data object Cancelled : SessionOutcome
+
+    /** Anything else, with the sentence the user is shown. */
+    data class Failed(val message: String) : SessionOutcome
+}
+
+/**
+ * Maps a return code onto the outcome, and builds the failure sentence when there is one.
+ *
+ * **The two message parts arrive as lambdas, deliberately.** `getAllLogsAsString` and
+ * `getFailStackTrace` are calls onto a native session, and only the failure arm needs either. Taking
+ * them by value would put both on the happy path of every successful conversion, which is a cost the
+ * shape this replaced did not have — the old code read them inside the `else` branch. That is the
+ * same reason [org.libremediaconverter.codec.AndroidDeviceCodecs.capabilitiesFrom] takes a
+ * `Sequence`: a seam should not change what runs when.
+ *
+ * A null [rc] is a real input rather than a defensive one — `getReturnCode()` is nullable, and a
+ * session killed before it reported anything has none. It is neither success nor cancellation, so
+ * it fails, and the sentence says `null` where the number would be.
+ */
+internal fun sessionOutcome(
+    rc: ReturnCode?,
+    prefix: String,
+    failStackTrace: () -> String?,
+    logTail: () -> String?,
+): SessionOutcome = when {
+    ReturnCode.isSuccess(rc) -> SessionOutcome.Success
+    ReturnCode.isCancel(rc) -> SessionOutcome.Cancelled
+    else -> SessionOutcome.Failed(
+        "$prefix failed (${rc?.value}): " + failStackTrace().orEmpty().ifBlank { logTail().orEmpty() },
+    )
+}

app/src/test/java/org/libremediaconverter/codec/CodecEnumerationTest.kt

@@ -0,0 +1,201 @@
+package org.libremediaconverter.codec
+
+import org.junit.Assert.assertEquals
+import org.junit.Assert.assertFalse
+import org.junit.Assert.assertTrue
+import org.junit.Test
+import org.junit.runner.RunWith
+import org.libremediaconverter.model.VideoCodec
+import org.robolectric.RobolectricTestRunner
+
+/**
+ * The rules `AndroidDeviceCodecs.probe()` applies to the platform's codec list.
+ *
+ * ## Why this is not a third run of the #86/#133 spike
+ *
+ * #86 closed `probe()` as device-bound. #133 re-opened the question with
+ * `ShadowMediaCodecList` in hand and closed it again, for a reason that was right about what it
+ * was answering: `MediaCodecInfoBuilder` "has no `setIsAlias` and no `setCanonicalName`, so the
+ * alias skip and the canonical-name dedup — the two things the class's KDoc calls out as easy to
+ * get wrong — are not reachable through it."
+ *
+ * **That objection is about the shadow.** It does not apply to a function that takes its own entry
+ * type, which is what `capabilitiesFrom` now does. The half #133 named as unreachable is the half
+ * this file spends most of its cases on.
+ *
+ * ## What made the seam worth cutting, which is not coverage
+ *
+ * The `runCatching` fallback logged *"assuming permissive"* and returned empty sets — and empty
+ * sets are **restrictive**: `"video/avc" in emptySet()` is `false`, so `canEncode` and `canDecode`
+ * both answer no and every job routes to FFmpeg. The code was right and the message described the
+ * opposite of it. That is pinned below, so whichever reading a future change takes, it has to say
+ * so out loud.
+ *
+ * Robolectric only because `capabilitiesFrom` logs what it found; the rules themselves are pure.
+ */
+@RunWith(RobolectricTestRunner::class)
+class CodecEnumerationTest {
+
+    /**
+     * The alias skip, in the one arrangement where it is observable — and finding that arrangement
+     * is the whole of this test.
+     *
+     * A first attempt listed the alias *after* the codec it aliases and passed with the skip
+     * deleted, because `canonicalName` is shared and the dedup below catches the second entry
+     * either way. The two rules overlap, so a fixture that does not separate them tests neither.
+     *
+     * What separates them is **order**. `MediaCodecInfo.getCanonicalName()` on an alias returns the
+     * underlying codec's name, so an alias arriving first claims that name in `seen` and has its
+     * own `supportedTypes` credited — and then the real codec is dropped by the dedup. Without the
+     * alias skip the device is described by whichever entry the platform happened to list first.
+     *
+     * That also says what the rule is worth. With a `Set` accumulator, an alias declaring the same
+     * types as its codec changes nothing whichever order they arrive in; the skip earns its place
+     * only when the two disagree, which is exactly when believing the wrong one matters.
+     */
+    @Test
+    fun `an alias listed before the codec it aliases does not describe the device`() {
+        val codecs = capabilities(
+            entry("c2.qti.avc.encoder", encoder = true, types = listOf(HEVC), alias = true),
+            entry("c2.qti.avc.encoder", encoder = true, types = listOf(AVC)),
+        )
+
+        assertTrue("the real codec's types are the device's", codecs.canEncode(VideoCodec.H264))
+        assertFalse(
+            "an alias must not be credited with types the codec it aliases never claimed",
+            codecs.canEncode(VideoCodec.H265),
+        )
+    }
+
+    @Test
+    fun `two entries sharing a canonical name are read once`() {
+        val codecs = capabilities(
+            entry("c2.qti.avc.encoder", encoder = true, types = listOf(AVC)),
+            entry("c2.qti.avc.encoder", encoder = true, types = listOf(HEVC)),
+        )
+
+        assertEquals(setOf(AVC), codecs.hardwareEncoders())
+    }
+
+    /**
+     * Both halves of the hardware predicate, one arm at a time.
+     *
+     * A vendor may declare a codec hardware-accelerated *and* software-only; the class KDoc is
+     * explicit that the first flag "cannot be tested for correctness", so the second is what stops
+     * a mislabelled software encoder being treated as the fast path.
+     */
+    @Test
+    fun `an encoder counts as hardware only when it is accelerated and not software-only`() {
+        assertEquals(
+            setOf(AVC),
+            capabilities(entry("hw", encoder = true, accelerated = true, types = listOf(AVC))).hardwareEncoders(),
+        )
+        assertEquals(
+            emptySet<String>(),
+            capabilities(entry("sw", encoder = true, accelerated = false, types = listOf(AVC))).hardwareEncoders(),
+        )
+        assertEquals(
+            "a codec claiming both must not be trusted as hardware",
+            emptySet<String>(),
+            capabilities(
+                entry("both", encoder = true, accelerated = true, softwareOnly = true, types = listOf(AVC)),
+            ).hardwareEncoders(),
+        )
+    }
+
+    /**
+     * Decoders are collected regardless of the hardware flags, and that asymmetry is the design.
+     *
+     * `canDecode` asks whether the platform can read the input at all — a software decoder answers
+     * that as well as a hardware one. `canEncode` asks whether the *fast path* exists, which is a
+     * different question and why only encoders are filtered.
+     */
+    @Test
+    fun `a software decoder still counts as something the platform can read`() {
+        val codecs = capabilities(
+            entry(
+                "c2.android.avc.decoder",
+                encoder = false,
+                accelerated = false,
+                softwareOnly = true,
+                types = listOf(AVC),
+            ),
+        )
+
+        assertTrue(codecs.canDecode("h264"))
+    }
+
+    @Test
+    fun `audio types are ignored on both sides`() {
+        val codecs = capabilities(
+            entry("aac.encoder", encoder = true, accelerated = true, types = listOf("audio/mp4a-latm")),
+            entry("aac.decoder", encoder = false, types = listOf("audio/mp4a-latm")),
+        )
+
+        assertEquals(emptySet<String>(), codecs.hardwareEncoders())
+        // Not "the platform cannot decode AAC" -- `canDecode` is asked about *video* codec names,
+        // and an unknown name is answered permissively. The point is that nothing audio reached
+        // either set.
+        assertTrue("an unknown name stays permissive", codecs.canDecode("something-nobody-named"))
+    }
+
+    /**
+     * The failure fallback, pinned as the restrictive answer it actually is.
+     *
+     * #194 decided this rather than assuming it: the code stays, the message changes. If a later
+     * change wants the permissive reading its old log line described, this test is what makes that
+     * a decision instead of a drift.
+     */
+    @Test
+    fun `an enumeration that fails sends every job to FFmpeg`() {
+        val codecs = AndroidDeviceCodecs.capabilitiesFrom { error("MediaCodecList exploded") }
+
+        assertFalse("a failed enumeration must not claim a hardware encoder", codecs.canEncode(VideoCodec.H264))
+        assertFalse(codecs.canDecode("h264"))
+        assertEquals(emptySet<String>(), codecs.hardwareEncoders())
+    }
+
+    /**
+     * A list that throws partway keeps what it already read.
+     *
+     * This predates the seam — `runCatching` has always wrapped the iteration rather than a list
+     * built before it — and it is asserted here because the seam is where it could quietly have
+     * been lost. Taking a `List` instead of a `Sequence` would move the throw outside the loop and
+     * turn this partial answer into an empty one, with no test to notice.
+     */
+    @Test
+    fun `codecs read before a failing entry are kept`() {
+        val codecs = AndroidDeviceCodecs.capabilitiesFrom {
+            sequence {
+                yield(entry("good", encoder = true, accelerated = true, types = listOf(AVC)))
+                error("the sixth codec's properties threw")
+            }
+        }
+
+        assertEquals(setOf(AVC), codecs.hardwareEncoders())
+    }
+
+    private fun capabilities(vararg entries: AndroidDeviceCodecs.Companion.CodecEntry) =
+        AndroidDeviceCodecs.capabilitiesFrom { entries.asSequence() }
+
+    private fun entry(
+        canonicalName: String,
+        encoder: Boolean,
+        accelerated: Boolean = true,
+        softwareOnly: Boolean = false,
+        alias: Boolean = false,
+        types: List<String>,
+    ) = AndroidDeviceCodecs.Companion.CodecEntry(
+        canonicalName = canonicalName,
+        isAlias = alias,
+        isEncoder = encoder,
+        isHardwareAccelerated = accelerated,
+        isSoftwareOnly = softwareOnly,
+        supportedTypes = types,
+    )
+
+    private companion object {
+        const val AVC = "video/avc"
+        const val HEVC = "video/hevc"
+    }
+}

app/src/test/java/org/libremediaconverter/convert/CancelReachesWorkManagerTest.kt

@@ -0,0 +1,180 @@
+package org.libremediaconverter.convert
+
+import android.app.Application
+import androidx.media3.common.util.UnstableApi
+import androidx.work.OneTimeWorkRequestBuilder
+import androidx.work.WorkInfo
+import androidx.work.WorkManager
+import androidx.work.workDataOf
+import kotlinx.coroutines.Dispatchers
+import org.junit.After
+import org.junit.Assert.assertEquals
+import org.junit.Before
+import org.junit.Test
+import org.junit.runner.RunWith
+import org.libremediaconverter.join.JoinState
+import org.libremediaconverter.join.JoinViewModel
+import org.libremediaconverter.model.InputProbe
+import org.libremediaconverter.work.ConcatWorker
+import org.libremediaconverter.work.ConversionWorker
+import org.libremediaconverter.work.JobTags
+import org.robolectric.RobolectricTestRunner
+import org.robolectric.RuntimeEnvironment
+import java.util.UUID
+import java.util.concurrent.TimeUnit
+
+/**
+ * That `cancel()` cancels the job, on both screens.
+ *
+ * ## Why this was missing, which is the interesting part
+ *
+ * Both `cancel()` methods are one line — `activeWorkId?.let(workManager::cancelWorkById)` — and
+ * **JaCoCo reports every line of both as covered**. `SettingsEditsTest`'s
+ * `cancelling with no active job does nothing rather than throwing` runs the method, and its own
+ * comment names which half it drives: "`activeWorkId?.let(...)` -- the null side". The other side
+ * had never been entered, and `JoinViewModel.cancel()` had no test at all.
+ *
+ * So no line-level coverage filter could see this. What surfaces it is a method-level read —
+ * `mi=11, ci=7, mb=1, cb=1` on both — a covered method with an arm nothing takes. That is the
+ * second of the two filters #194 records, and this is the gap that argued for it.
+ *
+ * The affordance tests are not this. `ConverterStateAffordancesTest` and `JoinStateAffordancesTest`
+ * click `TestTags.CANCEL` and assert the *action* fires into a stub; `ScreenWiringTest` asserts the
+ * action calls `viewModel.cancel()`. Both halves were pinned and the join between them was not, so
+ * nothing in 584 tests connected the button to WorkManager.
+ *
+ * ## Why the job is enqueued with a delay
+ *
+ * The test WorkManager runs on a `SynchronousExecutor`, so an ordinary request finishes inline —
+ * which is exactly why only the null half was ever covered: by the time a test could call
+ * `cancel()`, `convert()`'s job was already terminal. `setInitialDelay` is what `TestScheduler`
+ * honours, so the job sits in `ENQUEUED` until the test lets it go, and it never does.
+ *
+ * **Production never sets a delay**, so the request is built here rather than through
+ * `ConversionWorker.request`. The *state* is not synthetic: `ENQUEUED` at `runAttemptCount == 0` is
+ * what every job passes through before the scheduler picks it up, `Reattachment.choose` ranks it
+ * `QUEUED`, and `conversionStateFrom` maps it to `Converting(input, 0)`. The delay changes how long
+ * the job stays in a real state, not which state it is in.
+ *
+ * ## What is asserted, and in which order
+ *
+ * WorkManager's own record first, then the screen. The screen alone would be a weaker claim than it
+ * looks: `CANCELLED` maps to `Idle` for a reattached job, and `Idle` is also where a ViewModel that
+ * did nothing at all would sit.
+ */
+@UnstableApi
+@RunWith(RobolectricTestRunner::class)
+class CancelReachesWorkManagerTest {
+
+    private lateinit var app: Application
+    private lateinit var workManager: WorkManager
+
+    @Before
+    fun setUp() {
+        app = RuntimeEnvironment.getApplication()
+        ConversionDependencies.publisher = { RecordingPublisher(app) }
+        ConversionDependencies.probe = { _, _ -> InputProbe() }
+        installTestWorkManager(app, workDataOf())
+        workManager = WorkManager.getInstance(app)
+    }
+
+    @After
+    fun tearDown() {
+        ConversionDependencies.reset()
+    }
+
+    @Test
+    fun `cancelling a queued conversion cancels that job`() {
+        val id = enqueueQueuedConversion()
+        val viewModel = ConversionViewModel(app, Dispatchers.Unconfined)
+        awaitState(viewModel.state, "Converting") { it is ConversionState.Converting }
+
+        viewModel.cancel()
+
+        assertEquals(
+            "Cancel must reach WorkManager, not just the screen",
+            WorkInfo.State.CANCELLED,
+            stateOf(id),
+        )
+        awaitState(viewModel.state, "Idle") { it is ConversionState.Idle }
+    }
+
+    @Test
+    fun `cancelling a queued join cancels that job`() {
+        val id = enqueueQueuedJoin()
+        val viewModel = JoinViewModel(app, Dispatchers.Unconfined)
+        awaitState(viewModel.state, "Joining") { it is JoinState.Joining }
+
+        viewModel.cancel()
+
+        assertEquals(
+            "Cancel must reach WorkManager, not just the screen",
+            WorkInfo.State.CANCELLED,
+            stateOf(id),
+        )
+        awaitState(viewModel.state, "Idle") { it is JoinState.Idle }
+    }
+
+    /**
+     * The negative that bounds both: cancelling must cancel the job the screen is showing, and only
+     * that one.
+     *
+     * Without this, `cancel()` could cancel everything in the queue — `cancelAllWork()` in place of
+     * `cancelWorkById(activeWorkId)` — and both tests above would still pass.
+     */
+    @Test
+    fun `cancelling one conversion leaves another queued job alone`() {
+        val bystander = enqueueQueuedConversion(displayName = "beach.mp4")
+        val id = enqueueQueuedConversion(displayName = "holiday.mp4")
+        val viewModel = ConversionViewModel(app, Dispatchers.Unconfined)
+        val converting = awaitState(viewModel.state, "Converting") { it is ConversionState.Converting }
+        val onScreen = (converting as ConversionState.Converting).input.displayName
+
+        viewModel.cancel()
+
+        // Which of the two the ViewModel reattached to is the query's business, not this test's --
+        // the comparator leaves queued jobs tied deliberately, per Reattachment's ordering notes.
+        // So assert the shape rather than the identity: exactly one is cancelled, and the other is
+        // untouched.
+        val cancelled = listOf(id, bystander).filter { stateOf(it) == WorkInfo.State.CANCELLED }
+        assertEquals(
+            "exactly one job may be cancelled, with $onScreen on screen",
+            1,
+            cancelled.size,
+        )
+    }
+
+    private fun stateOf(id: UUID): WorkInfo.State =
+        requireNotNull(workManager.getWorkInfoById(id).get()) { "no WorkInfo for $id" }.state
+
+    /**
+     * A conversion sitting in the queue, which is where every job starts.
+     *
+     * Built by hand rather than through `ConversionWorker.request` for the reason in the class
+     * KDoc; the display-name tag is included because `reattach()` reads it for the file card, and a
+     * job without one would exercise the `UNKNOWN_INPUT_NAME` fallback instead of this test's
+     * subject.
+     */
+    private fun enqueueQueuedConversion(displayName: String = "holiday.mp4"): UUID {
+        val request = OneTimeWorkRequestBuilder<ConversionWorker>()
+            .addTag(JobTags.displayName(displayName))
+            .setInitialDelay(QUEUE_HOLD_HOURS, TimeUnit.HOURS)
+            .build()
+        workManager.enqueue(request).result.get()
+        return request.id
+    }
+
+    private fun enqueueQueuedJoin(inputCount: Int = 2): UUID {
+        val request = OneTimeWorkRequestBuilder<ConcatWorker>()
+            .addTag(JobTags.inputCount(inputCount))
+            .setInitialDelay(QUEUE_HOLD_HOURS, TimeUnit.HOURS)
+            .build()
+        workManager.enqueue(request).result.get()
+        return request.id
+    }
+
+    private companion object {
+        /** Long enough that `TestScheduler` never releases the job during a test run. */
+        const val QUEUE_HOLD_HOURS = 1L
+    }
+}

app/src/test/java/org/libremediaconverter/convert/FFprobeMappingTest.kt

@@ -0,0 +1,192 @@
+package org.libremediaconverter.convert
+
+import com.arthenica.ffmpegkit.MediaInformation
+import com.arthenica.ffmpegkit.StreamInformation
+import org.json.JSONObject
+import org.junit.Assert.assertEquals
+import org.junit.Assert.assertFalse
+import org.junit.Assert.assertNull
+import org.junit.Assert.assertTrue
+import org.junit.Test
+import org.junit.runner.RunWith
+import org.libremediaconverter.model.Container
+import org.robolectric.RobolectricTestRunner
+
+/**
+ * What FFprobe's answer means, read as a function of the answer alone.
+ *
+ * `readMediaInformation` was 114 missed instructions and 24 missed branches — the second-biggest
+ * block on the wave-4 report — of which **exactly one line needed a device**:
+ *
+ * ```kotlin
+ * FFprobeKit.getMediaInformation(path).getMediaInformation()
+ * ```
+ *
+ * Everything after it reads an ordinary object. `javap` over the committed AAR's runtime jar:
+ * `MediaInformation(JSONObject, List<StreamInformation>, List<Chapter>)` and
+ * `StreamInformation(JSONObject)` are plain public constructors, and neither class's `<clinit>`
+ * loads the native library — so the fixtures below are built without `libffmpegkit` present.
+ *
+ * ## The one that matters
+ *
+ * `containerFrom(formatName, video?.getCodec())`. FFprobe reports `matroska,webm` for **both** MKV
+ * and WebM, because they share a demuxer, so the video codec is the only thing separating them.
+ * `containerFrom` has thirty-three covered branches of its own and not one of them can notice the
+ * argument being dropped — the mistake would be at the call, not in the callee, and every existing
+ * `containerFrom` test would stay green while every VP9 WebM quietly became an MKV.
+ *
+ * Robolectric only for `org.json`, which is a stub in a plain JVM test.
+ */
+@RunWith(RobolectricTestRunner::class)
+class FFprobeMappingTest {
+
+    @Test
+    fun `the video codec decides between matroska and webm`() {
+        assertEquals(
+            Container.WEBM,
+            MediaProbe.ffprobeInfoFrom(info("matroska,webm", stream("video", "vp9"))).container,
+        )
+        assertEquals(
+            Container.MKV,
+            MediaProbe.ffprobeInfoFrom(info("matroska,webm", stream("video", "h264"))).container,
+        )
+    }
+
+    /**
+     * The same format name with no video stream at all, which is what makes the case above about
+     * the *argument* rather than about the format string.
+     */
+    @Test
+    fun `a matroska container with no video track cannot be told from webm and is not guessed`() {
+        val read = MediaProbe.ffprobeInfoFrom(info("matroska,webm", stream("audio", "opus")))
+
+        assertEquals(Container.MKV, read.container)
+        assertNull(read.videoCodec)
+    }
+
+    @Test
+    fun `the first stream of each type wins`() {
+        val read = MediaProbe.ffprobeInfoFrom(
+            info(
+                "mov,mp4,m4a,3gp,3g2,mj2",
+                stream("video", "h264", width = 1920, height = 1080),
+                stream("video", "hevc", width = 640, height = 480),
+                stream("audio", "aac"),
+                stream("audio", "mp3"),
+            ),
+        )
+
+        assertEquals("h264", read.videoCodec)
+        assertEquals("aac", read.audioCodec)
+        assertEquals(1920, read.width)
+        assertEquals(1080, read.height)
+    }
+
+    /**
+     * Dimensions come from the stream the codec came from, not from whichever stream has some.
+     *
+     * The fixture is deliberately awkward: the chosen video stream carries **no** dimensions and a
+     * later one does. That is a real shape — FFprobe omits `width`/`height` for a stream it could
+     * not measure — and it is the only arrangement that separates the two readings.
+     *
+     * A first version of this file asserted the dimensions inside the case above, where the chosen
+     * stream was also the first one carrying any. Replacing `video?.getWidth()` with
+     * `streams.firstNotNullOfOrNull { it.getWidth() }` gave the same answer there and **the
+     * mutation survived**. It reddens here.
+     */
+    @Test
+    fun `a video stream with no dimensions reports none rather than borrowing another stream's`() {
+        val read = MediaProbe.ffprobeInfoFrom(
+            info(
+                "mov,mp4,m4a,3gp,3g2,mj2",
+                stream("video", "h264"),
+                stream("video", "hevc", width = 640, height = 480),
+            ),
+        )
+
+        assertEquals("h264", read.videoCodec)
+        assertEquals(0, read.width)
+        assertEquals(0, read.height)
+    }
+
+    /**
+     * Stream order is the file's, not a promise. An audio-first container must read the same as a
+     * video-first one.
+     */
+    @Test
+    fun `an audio track listed first does not become the video track`() {
+        val read = MediaProbe.ffprobeInfoFrom(
+            info("mov,mp4,m4a,3gp,3g2,mj2", stream("audio", "aac"), stream("video", "h264")),
+        )
+
+        assertEquals("h264", read.videoCodec)
+        assertEquals("aac", read.audioCodec)
+    }
+
+    @Test
+    fun `a duration in seconds becomes milliseconds`() {
+        assertEquals(12_345L, MediaProbe.ffprobeInfoFrom(info("mp4", duration = "12.345")).durationMs)
+    }
+
+    /**
+     * Both ways a duration can be absent, and neither may throw.
+     *
+     * FFprobe reports `"N/A"` for a stream it could not measure, and omits the key entirely for
+     * some containers. `toDoubleOrNull` is what keeps the second from being an exception on the
+     * file-pick path, where there is no user-visible failure to report it as.
+     */
+    @Test
+    fun `a duration that is not a number is no duration rather than a crash`() {
+        assertEquals(0L, MediaProbe.ffprobeInfoFrom(info("mp4", duration = "N/A")).durationMs)
+        assertEquals(0L, MediaProbe.ffprobeInfoFrom(info("mp4", duration = null)).durationMs)
+    }
+
+    @Test
+    fun `a file with no streams reports nothing rather than defaults that look measured`() {
+        val read = MediaProbe.ffprobeInfoFrom(info("mp4"))
+
+        assertNull(read.videoCodec)
+        assertNull(read.audioCodec)
+        assertEquals(0, read.width)
+        assertEquals(0, read.height)
+    }
+
+    @Test
+    fun `an image format is reported as one`() {
+        assertTrue(MediaProbe.ffprobeInfoFrom(info("png_pipe", stream("video", "png"))).isImage)
+        assertFalse(MediaProbe.ffprobeInfoFrom(info("mp4", stream("video", "h264"))).isImage)
+    }
+
+    private fun stream(type: String, codec: String, width: Int? = null, height: Int? = null) = StreamInformation(
+        JSONObject().apply {
+            put(StreamInformation.KEY_TYPE, type)
+            put(StreamInformation.KEY_CODEC, codec)
+            width?.let { put(StreamInformation.KEY_WIDTH, it) }
+            height?.let { put(StreamInformation.KEY_HEIGHT, it) }
+        },
+    )
+
+    /**
+     * The format properties are **nested** under `"format"`, which is how FFprobe reports them and
+     * what `MediaInformation` reads: `getFormat()` resolves through `getStringFormatProperty`, not
+     * off the top-level object. A first version of this helper put the keys at the top level and
+     * every format-dependent case failed with a null container, which is worth recording here so
+     * the next fixture does not have to rediscover it.
+     *
+     * Streams are the other half and are *not* nested — they come from the constructor argument.
+     */
+    private fun info(formatName: String, vararg streams: StreamInformation, duration: String? = "1.0") =
+        MediaInformation(
+            JSONObject().apply {
+                put(
+                    MediaInformation.KEY_FORMAT_PROPERTIES,
+                    JSONObject().apply {
+                        put(MediaInformation.KEY_FORMAT, formatName)
+                        duration?.let { put(MediaInformation.KEY_DURATION, it) }
+                    },
+                )
+            },
+            streams.toList(),
+            emptyList(),
+        )
+}

app/src/test/java/org/libremediaconverter/convert/FailedSaveRetryTest.kt

@@ -51,10 +51,13 @@ import java.io.File
  *   here needs. `OutputPublisherPublishTest` owns what a real publish writes.
  * - **The screen's two buttons.** `ConverterStateAffordancesTest` and `JoinStateAffordancesTest`
  *   own what each state renders; this file owns what each state carries.
- * - **`ConverterScreen`'s `destinationMime` line itself.** It lives in the entry point, above the
- *   `ScreenContent` seam, and reaching it needs a real ViewModel inside a composition. What it
- *   reads -- `pendingSave()?.mimeType` -- is asserted directly instead, which is why that
- *   derivation was moved out of the entry point in the first place.
+ * - ~~**`ConverterScreen`'s `destinationMime` line itself.**~~ **Withdrawn 2026-09-02 (#201).** The
+ *   exemption read: "it lives in the entry point, above the `ScreenContent` seam, and reaching it
+ *   needs a real ViewModel inside a composition". That was true when written and is no longer:
+ *   `AdaptiveShellTest` (#173) established composing the real screens with real ViewModels, and
+ *   #200 added the `ShadowActivity` mechanics for reading what a launcher launched. `RetrySaveMimeTest`
+ *   now asserts the line directly. What this file still owns is the half below the seam -- what each
+ *   state *carries* -- which is why `pendingSave()?.mimeType` is also asserted here.
  * - **Picking a new input while a `Failed` carries a file.** `onInputPicked` overwrites the state
  *   without discarding, from `Converted` exactly as much as from a carrying `Failed`, and neither
  *   branch renders a picker. It is a pre-existing path this change neither opens nor widens: the

app/src/test/java/org/libremediaconverter/convert/FileCardTest.kt

@@ -205,6 +205,34 @@ class FileCardTest {
         assertNoRow("Length")
     }
 
+    /**
+     * A video the app knows a great deal about and cannot name the container of.
+     *
+     * Not an edge case. `InputProbe.container`'s own KDoc says `MediaExtractor` cannot report a
+     * container at all -- it comes from FFprobe -- so any run where FFprobe did not answer produces
+     * exactly this: real codec, real dimensions, real duration, `container = null`.
+     *
+     * **The twin was already tested and this one was not**, which is the argument for adding it.
+     * `FileCard` renders `probe.container?.label ?: "Unknown"` twice, once in the `AUDIO_ONLY`
+     * branch (`ConverterScreen.kt:660`) and once in the `VIDEO` branch (`:668`), and
+     * `an audio-only file nothing else could describe degrades one row at a time` drives only the
+     * first. Same expression, same fallback, one kind covered. That asymmetry is the same one
+     * `CLAUDE.md` records for including `ContainerCapabilities:94`.
+     *
+     * The other rows are asserted alongside so this is not a copy of the audio-only case: there,
+     * everything is unknown at once; here, one field is missing from a probe that is otherwise
+     * complete, and the rest must be unaffected by it.
+     */
+    @Test
+    fun `a video file whose container nothing identified says so and keeps its other rows`() {
+        setFileCard(input(probe = VIDEO_PROBE.copy(container = null)))
+
+        assertRow("Container", "Unknown")
+        assertRow("Video", "${VideoCodec.H264.label} · 1920×1080")
+        assertRow("Audio", AudioCodec.AAC.label)
+        assertRow("Length", "1:30")
+    }
+
     /**
      * The row is one node, not a label node beside a value node. A test matching on `"Container"`
      * alone would pass against either shape.

app/src/test/java/org/libremediaconverter/convert/LauncherWiringTest.kt

@@ -0,0 +1,141 @@
+package org.libremediaconverter.convert
+
+import android.app.Activity
+import android.content.Intent
+import android.net.Uri
+import androidx.activity.ComponentActivity
+import androidx.compose.ui.test.assertIsDisplayed
+import androidx.compose.ui.test.junit4.v2.createAndroidComposeRule
+import androidx.compose.ui.test.onNodeWithTag
+import androidx.compose.ui.test.performClick
+import androidx.media3.common.util.UnstableApi
+import androidx.work.Data
+import org.junit.After
+import org.junit.Assert.assertEquals
+import org.junit.Before
+import org.junit.Rule
+import org.junit.Test
+import org.junit.runner.RunWith
+import org.libremediaconverter.join.JoinScreen
+import org.libremediaconverter.model.InputProbe
+import org.libremediaconverter.ui.TestTags
+import org.robolectric.RobolectricTestRunner
+import org.robolectric.RuntimeEnvironment
+import org.robolectric.Shadows.shadowOf
+import org.robolectric.shadows.ShadowActivity
+
+/**
+ * The launcher layer above the `ScreenContent` seam — registered, and until now never resulted.
+ *
+ * ## The hazard this exists for
+ *
+ * `ConversionViewModel.onInputPicked(uri: Uri)` and `.save(destination: Uri)` are **both
+ * `(Uri) -> Unit`**, so swapping the two launcher callbacks at `ConverterScreen.kt:70` and `:83`
+ * compiles, renders, and passes the entire suite. Picking a file would attempt a save to it, and
+ * choosing a destination would load it as input.
+ *
+ * That is precisely the defect class `ScreenWiringTest` exists for, on the one pair it declines to
+ * cover: it drives `converterActions` directly and says the launcher-backed actions stay
+ * parameters. Correct for the `actions` seam, and it leaves the edge above that seam unpinned.
+ *
+ * Join's equivalents (`JoinScreen.kt:45`, `:55`) are `List<Uri>` and `Uri`, so they are **not**
+ * transposable and need no such test. The picker filter is a different matter and is covered below
+ * for both screens.
+ *
+ * ## The two mechanics, verified before the assertions were written
+ *
+ * Neither is used anywhere else in the suite, so both were spiked first:
+ *
+ * - **Reading what was launched** — `shadowOf(activity).nextStartedActivityForResult`, which returns
+ *   the `Intent` with its `EXTRA_MIME_TYPES` intact.
+ * - **Delivering a result** — `shadowOf(activity).receiveResult(...)`, which reaches
+ *   `ComponentActivity`'s `ActivityResultRegistry` and fires the `rememberLauncherForActivityResult`
+ *   callback.
+ *
+ * `createAndroidComposeRule`, as `AdaptiveShellTest` uses and for the reason it gives: the screens
+ * compose real ViewModels through `viewModel()`, and the plain rule supplies no `ViewModelStoreOwner`.
+ */
+@UnstableApi
+@RunWith(RobolectricTestRunner::class)
+class LauncherWiringTest {
+
+    @get:Rule
+    val composeRule = createAndroidComposeRule<ComponentActivity>()
+
+    @Before
+    fun setUp() {
+        val app = RuntimeEnvironment.getApplication()
+        installTestWorkManager(app, Data.EMPTY)
+        // The real screen composes a real ViewModel; neither test here is about probing.
+        ConversionDependencies.probe = { _, _ -> InputProbe() }
+    }
+
+    @After
+    fun tearDown() = ConversionDependencies.reset()
+
+    /**
+     * The transposition guard. A picked file has to reach `onInputPicked`, which is observable as
+     * the screen arriving at `Ready` with the file card showing — `save()` from `Idle` returns at
+     * its own guard and leaves nothing behind.
+     */
+    @Test
+    fun `a picked document is loaded as input rather than saved to`() {
+        composeRule.setContent { ConverterScreen() }
+
+        composeRule.onNodeWithTag(TestTags.Converter.CHOOSE_FILE).performClick()
+        deliver(Uri.parse("content://test/holiday.mkv"))
+
+        composeRule.onNodeWithTag(TestTags.Converter.FILE_CARD_NAME).assertIsDisplayed()
+    }
+
+    /**
+     * `ConverterScreen.kt:65-67` records why the all-types wildcard is load-bearing rather than lazy:
+     *
+     * > the picker is images and video only, offers no audio at all, and will not reliably surface
+     * > .mkv/.flac/.webm
+     *
+     * Narrowing it would make every audio conversion unreachable from the file picker, and nothing
+     * would have gone red. (The literal is spelled only in the assertion below: a KDoc cannot
+     * contain it, because the wildcard's second half closes the comment.)
+     */
+    @Test
+    fun `the converter picker asks for every type, not just the ones a photo picker offers`() {
+        composeRule.setContent { ConverterScreen() }
+
+        composeRule.onNodeWithTag(TestTags.Converter.CHOOSE_FILE).performClick()
+
+        val intent = launched().intent
+        assertEquals(Intent.ACTION_OPEN_DOCUMENT, intent.action)
+        assertEquals(listOf("*/*"), intent.getStringArrayExtra(Intent.EXTRA_MIME_TYPES)?.toList())
+    }
+
+    @Test
+    fun `the join picker asks for video and accepts more than one file`() {
+        composeRule.setContent { JoinScreen() }
+
+        composeRule.onNodeWithTag(TestTags.Join.CHOOSE_FILES).performClick()
+
+        val intent = launched().intent
+        assertEquals(Intent.ACTION_OPEN_DOCUMENT, intent.action)
+        assertEquals(listOf("video/*"), intent.getStringArrayExtra(Intent.EXTRA_MIME_TYPES)?.toList())
+        // A join of one file is not a join; the contract is what asks for several.
+        assertEquals(true, intent.getBooleanExtra(Intent.EXTRA_ALLOW_MULTIPLE, false))
+    }
+
+    private fun launched(): ShadowActivity.IntentForResult {
+        composeRule.waitForIdle()
+        return requireNotNull(shadowOf(composeRule.activity).nextStartedActivityForResult) {
+            "nothing was launched for a result"
+        }
+    }
+
+    private fun deliver(uri: Uri) {
+        val started = launched()
+        shadowOf(composeRule.activity).receiveResult(
+            started.intent,
+            Activity.RESULT_OK,
+            Intent().setData(uri),
+        )
+        composeRule.waitForIdle()
+    }
+}

app/src/test/java/org/libremediaconverter/convert/MessagelessFailureTest.kt

@@ -0,0 +1,213 @@
+package org.libremediaconverter.convert
+
+import android.app.Application
+import android.net.Uri
+import androidx.media3.common.util.UnstableApi
+import androidx.work.Data
+import androidx.work.ListenableWorker
+import androidx.work.testing.TestListenableWorkerBuilder
+import androidx.work.workDataOf
+import kotlinx.coroutines.Dispatchers
+import kotlinx.coroutines.runBlocking
+import org.junit.After
+import org.junit.Assert.assertEquals
+import org.junit.Assert.assertNotNull
+import org.junit.Assert.assertTrue
+import org.junit.Before
+import org.junit.Test
+import org.junit.runner.RunWith
+import org.libremediaconverter.join.JoinState
+import org.libremediaconverter.join.JoinViewModel
+import org.libremediaconverter.model.ConversionRequest
+import org.libremediaconverter.model.EnginePreference
+import org.libremediaconverter.model.InputProbe
+import org.libremediaconverter.model.OutputFormat
+import org.libremediaconverter.work.ConcatWorker
+import org.libremediaconverter.work.ConversionWorker
+import org.robolectric.RobolectricTestRunner
+import org.robolectric.RuntimeEnvironment
+import java.io.File
+import java.util.UUID
+
+/**
+ * A failure that says nothing still has to say something.
+ *
+ * Three sites, all `ci == 0` before this file, and all the same rule:
+ *
+ * ```
+ * work/ConversionWorker.kt:316     cause.message ?: GENERIC_FAILURE_MESSAGE
+ * convert/ConversionViewModel.kt:631   e.message ?: SAVE_FAILED_MESSAGE
+ * join/JoinViewModel.kt:416           e.message ?: SAVE_FAILED_MESSAGE
+ * ```
+ *
+ * Every existing test throws *with* a message, so the right-hand side had never been evaluated
+ * anywhere in the suite. A `Throwable` carrying none is not exotic — `RuntimeException()`,
+ * `IOException()` and most platform exceptions raised without an argument all have a null message.
+ *
+ * ## Held in one class, against the ticket's suggestion
+ *
+ * #193 proposed putting each case beside the behaviour it neighbours. They are together instead,
+ * because they are one rule at three layers and because the trap below has to be explained once
+ * rather than three times. `FailedSaveRetryTest` sets the precedent for both ViewModels in one
+ * file; this extends it by one worker.
+ *
+ * ## The trap, which is why the worker case asserts what it does
+ *
+ * `ConversionStateMappingTest`'s *"a failure with nothing said still says something"* looks like it
+ * already covers the worker site. It does not: it drives the **read** side, `map(FAILED, Data.EMPTY)`,
+ * and that side has a fallback of its own (`ConversionViewModel.kt:147-149`):
+ *
+ * ```kotlin
+ * update.outputData.getString(ConversionWorker.KEY_ERROR)
+ *     ?.takeIf { it.isNotBlank() }
+ *     ?: ConversionWorker.GENERIC_FAILURE_MESSAGE
+ * ```
+ *
+ * So mutating the worker's fallback to `.orEmpty()` writes `KEY_ERROR to ""`, and the ViewModel
+ * turns that straight back into the same constant. **A test asserting on the resulting `Failed`
+ * state stays green under the mutation**, which is most likely why the write-side fallback survived
+ * three waves of test work. The worker case therefore reads `KEY_ERROR` off the worker's own
+ * `Result`, before anything downstream can repair it.
+ *
+ * The two save cases have no such second line: both write `_state.value` directly, so the state is
+ * the right thing to assert there.
+ */
+@UnstableApi
+@RunWith(RobolectricTestRunner::class)
+class MessagelessFailureTest {
+
+    private lateinit var app: Application
+    private lateinit var publisher: RecordingPublisher
+    private lateinit var staged: File
+
+    @Before
+    fun setUp() {
+        app = RuntimeEnvironment.getApplication()
+        publisher = RecordingPublisher(app)
+        ConversionDependencies.publisher = { publisher }
+        ConversionDependencies.probe = { _, _ -> InputProbe() }
+        staged = publisher.createStagingFile("holiday.mp4").apply { writeBytes(ByteArray(4096)) }
+    }
+
+    @After
+    fun tearDown() {
+        ConversionDependencies.reset()
+    }
+
+    /**
+     * The engine gives up without saying why, which is what a native crash looks like from here.
+     *
+     * Asserted on the worker's own output `Data` rather than on a screen — see the class KDoc.
+     */
+    @Test
+    fun `a conversion that fails without a message still reports one`() {
+        installTestWorkManager(app, Data.EMPTY)
+        ConversionDependencies.software = { MessagelessTranscoder }
+
+        val result = runBlocking { failingWorker().doWork() }
+
+        assertTrue("the job must fail rather than retry, got $result", result is ListenableWorker.Result.Failure)
+        assertEquals(
+            "a failure with no message must still put something on screen",
+            ConversionWorker.GENERIC_FAILURE_MESSAGE,
+            (result as ListenableWorker.Result.Failure).outputData.getString(ConversionWorker.KEY_ERROR),
+        )
+    }
+
+    @Test
+    fun `a save that fails without a message still reports one`() {
+        installTestWorkManager(app, conversionOutput())
+        val viewModel = ConversionViewModel(app, Dispatchers.Unconfined)
+        viewModel.onInputPicked(Uri.parse("content://test/holiday.mkv"))
+        awaitState(viewModel.state, "Ready") { it is ConversionState.Ready }
+        viewModel.convert()
+        awaitState(viewModel.state, "Converted") { it is ConversionState.Converted }
+
+        publisher.publishFailure = RuntimeException()
+        viewModel.save(DESTINATION)
+
+        val failed = awaitState(viewModel.state, "Failed") { it is ConversionState.Failed } as ConversionState.Failed
+        assertEquals(SAVE_FAILED_MESSAGE, failed.message)
+        // The handle travels even on the wordless path. Without this, a fallback that also dropped
+        // `pending` would pass -- and the file would be unreachable from the screen that just said
+        // the save failed.
+        assertNotNull("a wordless failure must still offer the file again", failed.retry)
+    }
+
+    @Test
+    fun `a join save that fails without a message still reports one`() {
+        installTestWorkManager(app, joinOutput())
+        val viewModel = JoinViewModel(app, Dispatchers.Unconfined)
+        viewModel.onInputsPicked(listOf(Uri.parse("content://test/a.mp4"), Uri.parse("content://test/b.mp4")))
+        awaitState(viewModel.state, "Ready") { it is JoinState.Ready }
+        viewModel.join()
+        awaitState(viewModel.state, "Joined") { it is JoinState.Joined }
+
+        publisher.publishFailure = RuntimeException()
+        viewModel.save(DESTINATION)
+
+        val failed = awaitState(viewModel.state, "Failed") { it is JoinState.Failed } as JoinState.Failed
+        assertEquals(SAVE_FAILED_MESSAGE, failed.message)
+        assertNotNull("a wordless failure must still offer the file again", failed.retry)
+    }
+
+    /**
+     * `FORCE_SOFTWARE` so the failure comes straight out of `runFFmpeg`.
+     *
+     * `AUTO` would enter `runMedia3OrFallBack`, whose catch runs the job a second time in software
+     * — the same exception would arrive, but through a path this test is not about and which
+     * `HardwareFallbackTest` already owns.
+     */
+    private fun failingWorker(): ConversionWorker {
+        val spec = OutputFormat.MP4_H265.spec
+        return TestListenableWorkerBuilder<ConversionWorker>(
+            context = app,
+            inputData = workDataOf(
+                ConversionWorker.KEY_INPUT_URI to "file:///tmp/holiday.mp4",
+                ConversionWorker.KEY_DISPLAY_NAME to "holiday.mp4",
+                ConversionWorker.KEY_CONTAINER to spec.container.name,
+                ConversionWorker.KEY_VIDEO_CODEC to spec.videoCodec.name,
+                ConversionWorker.KEY_AUDIO_CODEC to spec.audioCodec.name,
+                ConversionWorker.KEY_ENGINE_PREFERENCE to EnginePreference.FORCE_SOFTWARE.name,
+            ),
+            runAttemptCount = 0,
+        ).setId(JOB_ID).build()
+    }
+
+    private fun conversionOutput() = workDataOf(
+        ConversionWorker.KEY_OUTPUT_PATH to staged.absolutePath,
+        ConversionWorker.KEY_SUGGESTED_NAME to SUGGESTED_NAME,
+        ConversionWorker.KEY_MIME_TYPE to JOB_MIME_TYPE,
+    )
+
+    private fun joinOutput() = workDataOf(
+        ConcatWorker.KEY_OUTPUT_PATH to staged.absolutePath,
+        ConcatWorker.KEY_SUGGESTED_NAME to SUGGESTED_NAME,
+        ConcatWorker.KEY_MIME_TYPE to JOB_MIME_TYPE,
+    )
+
+    private companion object {
+        val DESTINATION: Uri = Uri.parse("content://test/destination.mp4")
+        val JOB_ID: UUID = UUID.fromString("00000000-0000-4000-8000-00000000019a")
+        const val SUGGESTED_NAME = "holiday.mp4"
+        const val JOB_MIME_TYPE = "video/mp4"
+    }
+}
+
+/**
+ * An engine that gives up without saying why.
+ *
+ * `RuntimeException()` rather than a subclass with a blank message: `Throwable.message` is *null*
+ * here, which is the case the elvis exists for. A blank-but-present message takes the left-hand
+ * side and is a different path — `ConversionStateMappingTest` covers that one, on the read side.
+ */
+@UnstableApi
+private object MessagelessTranscoder : SoftwareTranscoder {
+    override suspend fun run(
+        request: ConversionRequest,
+        inputPath: String,
+        output: File,
+        durationMs: Long,
+        onProgress: (Int) -> Unit,
+    ): Unit = throw RuntimeException()
+}

app/src/test/java/org/libremediaconverter/convert/RetrySaveMimeTest.kt

@@ -0,0 +1,136 @@
+package org.libremediaconverter.convert
+
+import android.app.Application
+import android.content.Intent
+import android.net.Uri
+import androidx.activity.ComponentActivity
+import androidx.compose.ui.test.junit4.v2.createAndroidComposeRule
+import androidx.compose.ui.test.onNodeWithTag
+import androidx.compose.ui.test.performClick
+import androidx.compose.ui.test.performScrollTo
+import androidx.media3.common.util.UnstableApi
+import androidx.work.WorkManager
+import androidx.work.workDataOf
+import org.junit.After
+import org.junit.Assert.assertEquals
+import org.junit.Assert.assertNotEquals
+import org.junit.Before
+import org.junit.Rule
+import org.junit.Test
+import org.junit.runner.RunWith
+import org.libremediaconverter.model.InputProbe
+import org.libremediaconverter.model.OutputFormat
+import org.libremediaconverter.ui.TestTags
+import org.libremediaconverter.work.ConversionWorker
+import org.robolectric.RobolectricTestRunner
+import org.robolectric.RuntimeEnvironment
+import org.robolectric.Shadows.shadowOf
+import java.io.File
+
+/**
+ * The save dialog opens with the type the *job* produced, not the type the picker is showing now.
+ *
+ * `ConverterScreen.kt:80` — `state.pendingSave()?.mimeType ?: settings.spec.mimeType` — had never
+ * taken its left-hand side. Its comment records what the line is for:
+ *
+ * > a retry offered after a failed save opens the dialog with the type its first attempt used —
+ * > the cast answered null for a `Failed`, and the fallback below is the current picker, which a
+ * > reattached job never set.
+ *
+ * So the untested half is the fix, and the tested half is the fallback it was added to stop being
+ * used.
+ *
+ * ## This revises a named exemption, deliberately
+ *
+ * `FailedSaveRetryTest`'s KDoc lists this line under "Not asserted here, so each is a decision
+ * rather than an omission":
+ *
+ * > It lives in the entry point, above the `ScreenContent` seam, and reaching it needs a real
+ * > ViewModel inside a composition.
+ *
+ * That was true when written. `AdaptiveShellTest` (#173) then established exactly that capability,
+ * and #200 added the two `ShadowActivity` mechanics that let a test read what a launcher launched.
+ * The reason the exemption gave no longer holds, so the exemption is withdrawn rather than left to
+ * be taken at face value — the same shape as #141 revising #84's boundary. That KDoc is corrected
+ * in this change.
+ *
+ * ## Why the job is reattached rather than run
+ *
+ * The screen composes its own ViewModel through `viewModel()`, so nothing can be injected into it.
+ * A job finished before the composition is the one route to a `Converted` state carrying output
+ * `Data` this test chose — and it is also the case the line exists for, since a reattached job's
+ * spec "was never in these settings at all".
+ */
+@UnstableApi
+@RunWith(RobolectricTestRunner::class)
+class RetrySaveMimeTest {
+
+    @get:Rule
+    val composeRule = createAndroidComposeRule<ComponentActivity>()
+
+    private lateinit var app: Application
+    private lateinit var staged: File
+
+    @Before
+    fun setUp() {
+        app = RuntimeEnvironment.getApplication()
+        ConversionDependencies.probe = { _, _ -> InputProbe() }
+        staged = OutputPublisher(app).createStagingFile("holiday.mkv").apply { writeBytes(ByteArray(4096)) }
+    }
+
+    @After
+    fun tearDown() = ConversionDependencies.reset()
+
+    @Test
+    fun `the save dialog offers the type the job produced, not the one the picker is showing`() {
+        finishAJobProducing(JOB_MIME_TYPE)
+        composeRule.setContent { ConverterScreen() }
+        composeRule.waitForIdle()
+
+        composeRule.onNodeWithTag(TestTags.SAVE_FILE).performScrollTo().performClick()
+        composeRule.waitForIdle()
+
+        val intent = requireNotNull(shadowOf(composeRule.activity).nextStartedActivityForResult) {
+            "the save dialog was never launched"
+        }.intent
+        assertEquals(Intent.ACTION_CREATE_DOCUMENT, intent.action)
+        assertEquals(JOB_MIME_TYPE, intent.type)
+        // The fixture is only meaningful while the two differ; without this the assertion above
+        // would pass just as well against the fallback.
+        assertNotEquals(
+            "the picker's own type must differ, or this test proves nothing",
+            JOB_MIME_TYPE,
+            OutputFormat.MP4_H265.spec.mimeType,
+        )
+    }
+
+    /**
+     * A conversion that finished while nothing was watching, which is what `reattach()` picks up.
+     *
+     * `SucceedingWorkerFactory` reports this output `Data` for whatever is enqueued, so the job
+     * lands `SUCCEEDED` carrying a staged path that exists — the two things `Reattachment.choose`
+     * requires of a finished job.
+     */
+    private fun finishAJobProducing(mimeType: String) {
+        installTestWorkManager(
+            app,
+            workDataOf(
+                ConversionWorker.KEY_OUTPUT_PATH to staged.absolutePath,
+                ConversionWorker.KEY_SUGGESTED_NAME to "holiday.mkv",
+                ConversionWorker.KEY_MIME_TYPE to mimeType,
+            ),
+        )
+        WorkManager.getInstance(app).enqueue(
+            ConversionWorker.request(
+                inputUri = Uri.parse("content://test/holiday.mkv"),
+                displayName = "holiday.mkv",
+                sizeBytes = 4_096L,
+            ),
+        ).result.get()
+    }
+
+    private companion object {
+        /** Matroska, against the MP4 the picker defaults to. */
+        const val JOB_MIME_TYPE = "video/x-matroska"
+    }
+}

app/src/test/java/org/libremediaconverter/convert/StaleLauncherResultTest.kt

@@ -0,0 +1,147 @@
+package org.libremediaconverter.convert
+
+import android.app.Application
+import android.net.Uri
+import androidx.media3.common.util.UnstableApi
+import androidx.work.WorkManager
+import androidx.work.workDataOf
+import kotlinx.coroutines.Dispatchers
+import org.junit.After
+import org.junit.Assert.assertEquals
+import org.junit.Before
+import org.junit.Test
+import org.junit.runner.RunWith
+import org.libremediaconverter.join.JoinState
+import org.libremediaconverter.join.JoinViewModel
+import org.libremediaconverter.model.InputProbe
+import org.libremediaconverter.work.ConcatWorker
+import org.libremediaconverter.work.ConversionWorker
+import org.robolectric.RobolectricTestRunner
+import org.robolectric.RuntimeEnvironment
+
+/**
+ * An answer that arrives after the screen has moved on does nothing.
+ *
+ * Four refusal arms, cold before this file:
+ *
+ * ```
+ * convert/ConversionViewModel.kt:513   currentInput() ?: return
+ * convert/ConversionViewModel.kt:600   pendingSave() ?: return
+ * join/JoinViewModel.kt:316            (as? Ready)?.inputs ?: return
+ * join/JoinViewModel.kt:390            pendingSave() ?: return
+ * ```
+ *
+ * They are not merely defensive. `ConverterScreen.kt:91` wires `convert()` to the
+ * **POST_NOTIFICATIONS result**, and `:83` wires `save()` to the CreateDocument result — so both
+ * are entered by a system callback rather than by a tap, and a result redelivered after process
+ * death arrives at a brand-new ViewModel sitting on `Idle`.
+ *
+ * ## The production change that came with this
+ *
+ * `currentInput()` used to answer for `Converting`, `Waiting` and `Converted` as well as `Ready`.
+ * Those arms were unreachable by tapping Convert but reachable through that permission callback,
+ * and reaching one enqueued a **second** job over a live one — `activeWorkId` overwritten, the
+ * first job still running with an orphaned notification and nothing holding its id.
+ *
+ * #202 decided to narrow rather than to test it as it stood, because a test written against the old
+ * shape would have frozen the double-enqueue as intended behaviour. `JoinViewModel.join()` has been
+ * `(_state.value as? JoinState.Ready)?.inputs ?: return` all along; the two screens are the same
+ * shape and only one was over-general.
+ */
+@UnstableApi
+@RunWith(RobolectricTestRunner::class)
+class StaleLauncherResultTest {
+
+    private lateinit var app: Application
+    private lateinit var workManager: WorkManager
+    private lateinit var staged: java.io.File
+
+    @Before
+    fun setUp() {
+        app = RuntimeEnvironment.getApplication()
+        val publisher = RecordingPublisher(app)
+        ConversionDependencies.publisher = { publisher }
+        ConversionDependencies.probe = { _, _ -> InputProbe() }
+        // A real staged file, because a SUCCEEDED job with no output path maps to Failed rather
+        // than Converted -- and Converted is the state this file's second case has to reach.
+        staged = publisher.createStagingFile("holiday.mp4").apply { writeBytes(ByteArray(4096)) }
+        installTestWorkManager(
+            app,
+            workDataOf(
+                ConversionWorker.KEY_OUTPUT_PATH to staged.absolutePath,
+                ConversionWorker.KEY_SUGGESTED_NAME to "holiday.mp4",
+                ConversionWorker.KEY_MIME_TYPE to "video/mp4",
+            ),
+        )
+        workManager = WorkManager.getInstance(app)
+    }
+
+    @After
+    fun tearDown() = ConversionDependencies.reset()
+
+    @Test
+    fun `a permission answer arriving on an empty screen enqueues nothing`() {
+        val viewModel = ConversionViewModel(app, Dispatchers.Unconfined)
+        awaitState(viewModel.state, "Idle") { it is ConversionState.Idle }
+
+        viewModel.convert()
+
+        assertEquals(ConversionState.Idle, viewModel.state.value)
+        assertEquals("nothing may be enqueued for a file that is not there", 0, conversionJobs())
+    }
+
+    /**
+     * The narrowing itself: a permission answer that arrives while a conversion is already running
+     * must not start a second one.
+     *
+     * Reached by converting once — the synchronous test WorkManager finishes it inline, so the
+     * screen is `Converted`, which is one of the three arms `currentInput()` used to answer for.
+     * Calling `convert()` again from there is precisely what the permission callback can do.
+     */
+    @Test
+    fun `a permission answer arriving after the job finished does not start a second one`() {
+        val viewModel = ConversionViewModel(app, Dispatchers.Unconfined)
+        viewModel.onInputPicked(Uri.parse("content://test/holiday.mkv"))
+        awaitState(viewModel.state, "Ready") { it is ConversionState.Ready }
+        viewModel.convert()
+        val converted = awaitState(viewModel.state, "Converted") { it is ConversionState.Converted }
+        assertEquals("the fixture needs exactly one job to start with", 1, conversionJobs())
+
+        viewModel.convert()
+
+        assertEquals("a second job must not be enqueued over the first", 1, conversionJobs())
+        assertEquals("and the screen must not move", converted, viewModel.state.value)
+    }
+
+    @Test
+    fun `a save answer arriving on an empty screen does nothing`() {
+        val viewModel = ConversionViewModel(app, Dispatchers.Unconfined)
+        awaitState(viewModel.state, "Idle") { it is ConversionState.Idle }
+
+        viewModel.save(DESTINATION)
+
+        assertEquals(ConversionState.Idle, viewModel.state.value)
+    }
+
+    @Test
+    fun `a join answer arriving on an empty screen enqueues nothing`() {
+        val viewModel = JoinViewModel(app, Dispatchers.Unconfined)
+        awaitState(viewModel.state, "Idle") { it is JoinState.Idle }
+
+        viewModel.join()
+        viewModel.save(DESTINATION)
+
+        assertEquals(JoinState.Idle, viewModel.state.value)
+        assertEquals(0, joinJobs())
+    }
+
+    private fun conversionJobs() = jobsTagged(ConversionWorker::class.java.name)
+
+    private fun joinJobs() = jobsTagged(ConcatWorker::class.java.name)
+
+    private fun jobsTagged(tag: String) = workManager.getWorkInfosByTag(tag).get().size
+
+    private companion object {
+        val DESTINATION: Uri = Uri.parse("content://test/destination.mp4")
+    }
+}

app/src/test/java/org/libremediaconverter/ffmpeg/FFmpegCommandBuilderTest.kt

@@ -190,6 +190,30 @@ class FFmpegCommandBuilderTest {
         assertPair(cmd(OutputFormat.M4A_AAC), "-b:a", "192k")
     }
 
+    /**
+     * Turning audio off, which the Advanced picker offers and nothing had ever built a command for.
+     *
+     * `audioArgs`' `Drop` arm was `ci == 0`. The suite's only `-an` assertion is in
+     * `gif generates a palette to avoid banding and drops audio`, and that one comes from the image
+     * path (`FFmpegCommandBuilder.kt:79`/`:90`), which emits `-an` directly and never reaches
+     * `audioArgs`. Two sites, one string, one tested.
+     *
+     * It is a live path rather than defensive code: `AdvancedPicker` renders all of
+     * `AudioCodec.entries` including `NONE`, `ContainerCapabilities.validate` permits audio-off
+     * whenever the input has video, and MKV routes the job to FFmpeg.
+     *
+     * Both halves are asserted. `-an` alone would still pass if the arm fell through to the `else`
+     * and emitted an AAC encoder beside it -- a file that is silent because the flag won, carrying
+     * an encoder nobody asked for.
+     */
+    @Test
+    fun `turning audio off drops the track instead of encoding one`() {
+        val args = cmd(OutputSpec(Container.MKV, VideoCodec.H264, AudioCodec.NONE))
+
+        assertTrue("audio turned off must emit -an, got $args", args.contains("-an"))
+        assertFalse("a dropped track must not also carry an encoder, got $args", args.contains("-c:a"))
+    }
+
     @Test
     fun `audio only formats never carry a video encoder`() {
         listOf(OutputFormat.MP3, OutputFormat.FLAC, OutputFormat.WAV, OutputFormat.OPUS)

app/src/test/java/org/libremediaconverter/ffmpeg/SessionOutcomeTest.kt

@@ -0,0 +1,127 @@
+package org.libremediaconverter.ffmpeg
+
+import com.arthenica.ffmpegkit.ReturnCode
+import org.junit.Assert.assertEquals
+import org.junit.Assert.assertTrue
+import org.junit.Test
+
+/**
+ * What a finished FFmpegKit session means, for both engines at once.
+ *
+ * `FFmpegEngine` and `ConcatEngine` each carried their own copy of this `when`, and the copies had
+ * drifted: one preferred the fail stack trace and fell back to the log tail, the other only ever
+ * read the log tail. Neither was tested, because both live inside a callback handed to `FFmpegKit`,
+ * which does not run on the JVM — so nothing could see that the two disagreed.
+ *
+ * **JVM-safe, verified rather than assumed.** `javap` over the committed AAR's runtime jar shows
+ * `ReturnCode(int)` as a plain public constructor with `SUCCESS`/`CANCEL` int constants and pure
+ * static `isSuccess`/`isCancel`; its `<clinit>` is constant initialisation and loads no native
+ * library.
+ *
+ * The unification is #203's decision, so the tests pin it as one: a join failure now carries the
+ * stack trace a conversion failure always did, while the two prefixes stay distinct.
+ */
+class SessionOutcomeTest {
+
+    @Test
+    fun `a return code of zero is success`() {
+        assertEquals(SessionOutcome.Success, outcome(ReturnCode(ReturnCode.SUCCESS)))
+    }
+
+    /**
+     * Cancellation is a separate outcome from failure, and the distinction is the point: the engines
+     * resume the continuation *cancelled* rather than exceptionally, so a user who pressed Cancel
+     * does not get an error card.
+     */
+    @Test
+    fun `a return code of 255 is a cancellation, not a failure`() {
+        assertEquals(SessionOutcome.Cancelled, outcome(ReturnCode(ReturnCode.CANCEL)))
+    }
+
+    @Test
+    fun `any other return code fails, and the sentence carries the number`() {
+        val failed = outcome(ReturnCode(1), stackTrace = "boom") as SessionOutcome.Failed
+
+        assertTrue("the code belongs in the message, got: ${failed.message}", failed.message.contains("(1)"))
+    }
+
+    /**
+     * The half that was different between the two engines before #203, now the same in both.
+     */
+    @Test
+    fun `the stack trace is preferred over the log tail`() {
+        val failed = outcome(ReturnCode(1), stackTrace = "the real cause", logTail = "…noise…")
+            as SessionOutcome.Failed
+
+        assertTrue(failed.message.contains("the real cause"))
+        assertTrue("the log tail must not be appended as well", !failed.message.contains("noise"))
+    }
+
+    @Test
+    fun `a blank stack trace falls back to the log tail`() {
+        val blank = outcome(ReturnCode(1), stackTrace = "   ", logTail = "the last few lines") as SessionOutcome.Failed
+        val absent = outcome(ReturnCode(1), stackTrace = null, logTail = "the last few lines") as SessionOutcome.Failed
+
+        assertTrue(blank.message.contains("the last few lines"))
+        assertTrue("a null stack trace is a blank one", absent.message.contains("the last few lines"))
+    }
+
+    /**
+     * Both sources empty still has to produce a sentence. A message ending in a dangling colon is
+     * thin, but it is what the user gets when FFmpeg said nothing at all, and it must not be an
+     * exception on the way to the screen.
+     */
+    @Test
+    fun `a failure with nothing to say still names the code`() {
+        val failed = outcome(ReturnCode(1), stackTrace = null, logTail = null) as SessionOutcome.Failed
+
+        assertEquals("FFmpeg failed (1): ", failed.message)
+    }
+
+    /**
+     * `getReturnCode()` is nullable and a session killed before it reported anything has none.
+     * Neither success nor cancellation, so it fails — and the sentence says so rather than throwing.
+     */
+    @Test
+    fun `a session with no return code at all fails`() {
+        val failed = outcome(null, logTail = "whatever was logged") as SessionOutcome.Failed
+
+        assertTrue("got: ${failed.message}", failed.message.startsWith("FFmpeg failed (null): "))
+    }
+
+    /**
+     * Unifying the *strategy* must not unify the *sentence*: the two engines describe different
+     * jobs, and a join that reports "FFmpeg failed" is a worse message than the one it replaced.
+     */
+    @Test
+    fun `each engine keeps its own prefix`() {
+        val join = sessionOutcome(ReturnCode(1), "Joining", { "cause" }, { null }) as SessionOutcome.Failed
+
+        assertTrue(join.message.startsWith("Joining failed (1): "))
+    }
+
+    /**
+     * Neither message source is read unless the outcome is a failure.
+     *
+     * They are calls onto a native session, and reading them on the happy path is work every
+     * successful conversion would do for nothing — which the shape this replaced did not, since it
+     * read them inside the `else` branch. That is why the parameters are lambdas, and this is what
+     * would notice if they stopped being.
+     */
+    @Test
+    fun `a session that succeeded reads neither the stack trace nor the log`() {
+        var reads = 0
+        fun counted(): String? {
+            reads++
+            return null
+        }
+
+        sessionOutcome(ReturnCode(ReturnCode.SUCCESS), "FFmpeg", ::counted, ::counted)
+        sessionOutcome(ReturnCode(ReturnCode.CANCEL), "FFmpeg", ::counted, ::counted)
+
+        assertEquals("neither source may be touched unless the session failed", 0, reads)
+    }
+
+    private fun outcome(rc: ReturnCode?, stackTrace: String? = null, logTail: String? = null) =
+        sessionOutcome(rc, "FFmpeg", { stackTrace }, { logTail })
+}

app/src/test/java/org/libremediaconverter/ui/theme/ThemeFollowsSystemTest.kt

@@ -0,0 +1,89 @@
+package org.libremediaconverter.ui.theme
+
+import androidx.compose.material3.ColorScheme
+import androidx.compose.material3.MaterialTheme
+import androidx.compose.ui.test.junit4.v2.createComposeRule
+import org.junit.Assert.assertEquals
+import org.junit.Assert.assertNotEquals
+import org.junit.Rule
+import org.junit.Test
+import org.junit.runner.RunWith
+import org.robolectric.RobolectricTestRunner
+import org.robolectric.annotation.Config
+
+/**
+ * The theme called the way the app calls it: with no arguments at all.
+ *
+ * [ThemeColorSchemeTest] resolves every branch of the `when` and always passes `darkTheme`
+ * explicitly, so the `$default` bridge is never entered and **`isSystemInDarkTheme()` is never
+ * called**. `MainActivity.kt:79` is its only default-argument caller and does not execute on the
+ * JVM, which left the app's actual call shape the one nothing exercised —
+ * `LibreMediaConverterTheme` reported `mi=21, mb=6, cb=12` at method level.
+ *
+ * ## Not #68
+ *
+ * #68 is about the two **unreachable** arms, `DarkColorScheme` and `LightColorScheme`, which cannot
+ * run because `dynamicColor` is always `true` and nothing can flip it. That is an open product
+ * decision. This is the reachable half — whether the default follows the system — and closing it
+ * does not close that.
+ *
+ * ## Why the assertion compares schemes rather than reading a number
+ *
+ * A luminance threshold would be a guess about the device palette. What is asserted instead is that
+ * the no-argument call resolves to **the same scheme** an explicit `darkTheme` of the matching
+ * value does, and a different one from its opposite. That holds whatever palette the platform
+ * hands back, and it is exactly the claim: the default reads the system rather than picking a side.
+ *
+ * Both schemes are resolved in one composition because `setContent` may be called once per test.
+ */
+@RunWith(RobolectricTestRunner::class)
+class ThemeFollowsSystemTest {
+
+    @get:Rule
+    val composeRule = createComposeRule()
+
+    @Test
+    @Config(qualifiers = "+night")
+    fun `with no arguments the theme follows a system in dark mode`() {
+        val resolved = resolve()
+
+        assertEquals("the default must resolve what darkTheme = true does", resolved.dark, resolved.bare)
+        assertNotEquals(resolved.light, resolved.bare)
+    }
+
+    @Test
+    @Config(qualifiers = "+notnight")
+    fun `with no arguments the theme follows a system in light mode`() {
+        val resolved = resolve()
+
+        assertEquals("the default must resolve what darkTheme = false does", resolved.light, resolved.bare)
+        assertNotEquals(resolved.dark, resolved.bare)
+    }
+
+    /**
+     * The three colours are read together as one value, because any single one could coincide
+     * between the two schemes on some palette while the schemes themselves differ. Background is
+     * what dark mode is chiefly about; primary and surface are along to make a coincidence
+     * implausible rather than merely unlikely.
+     */
+    private data class Fingerprint(val background: Long, val primary: Long, val surface: Long)
+
+    private fun ColorScheme.fingerprint() =
+        Fingerprint(background.value.toLong(), primary.value.toLong(), surface.value.toLong())
+
+    private class Resolved(val bare: Fingerprint, val dark: Fingerprint, val light: Fingerprint)
+
+    private fun resolve(): Resolved {
+        lateinit var bare: Fingerprint
+        lateinit var dark: Fingerprint
+        lateinit var light: Fingerprint
+        composeRule.setContent {
+            // No arguments — the call MainActivity makes, and the one nothing exercised.
+            LibreMediaConverterTheme { bare = MaterialTheme.colorScheme.fingerprint() }
+            LibreMediaConverterTheme(darkTheme = true) { dark = MaterialTheme.colorScheme.fingerprint() }
+            LibreMediaConverterTheme(darkTheme = false) { light = MaterialTheme.colorScheme.fingerprint() }
+        }
+        composeRule.waitForIdle()
+        return Resolved(bare, dark, light)
+    }
+}

app/src/test/java/org/libremediaconverter/work/ProgressNotificationTest.kt

@@ -21,8 +21,10 @@ import org.junit.Before
 import org.junit.Test
 import org.junit.runner.RunWith
 import org.libremediaconverter.convert.ConversionDependencies
+import org.libremediaconverter.convert.HardwareTranscoder
 import org.libremediaconverter.convert.SoftwareTranscoder
 import org.libremediaconverter.convert.installTestWorkManager
+import org.libremediaconverter.model.Container
 import org.libremediaconverter.model.ConversionRequest
 import org.libremediaconverter.model.DeviceCodecs
 import org.libremediaconverter.model.EnginePreference
@@ -129,6 +131,40 @@ class ProgressNotificationTest {
         )
     }
 
+    /**
+     * The same plumbing on the engine most conversions actually use, which had none.
+     *
+     * `ConversionWorker.kt:208-210` is a second `onProgress` lambda at a second call site — the one
+     * handed to `engine.transcode` — and it reported `ci == 0`. Every test above drives the FFmpeg
+     * path; `HardwareFallbackTest` reaches `runMedia3OrFallBack` but its recording transcoder
+     * records the call and never invokes the callback it was given. So the two engines' progress
+     * wiring was one tested and one not, and the untested one is the default: `ConversionRouter`
+     * sends everything it can to Media3.
+     *
+     * `AUTO` with a real H.264 probe, because `FORCE_SOFTWARE` is precisely what keeps the other
+     * tests out of this branch. The probe and the permissive codec profile are what let the router
+     * choose Media3 at all — `InputProbe()` reports `UNPARSEABLE`, which routes straight to FFmpeg.
+     *
+     * Asserted on the *percentage*, not merely on an update having happened: `publishProgress`
+     * takes a display name and a percent, and replacing the percent with a constant compiles.
+     */
+    @Test
+    fun `progress from the hardware engine reaches WorkManager the same way FFmpeg's does`() {
+        ConversionDependencies.probe = { _, _ -> H264_SOURCE }
+        val reporting = ReportingHardwareTranscoder { onProgress -> onProgress(PERCENT) }
+        ConversionDependencies.hardware = { reporting }
+
+        runBlocking { workerReporting(EnginePreference.AUTO) { }.doWork() }
+
+        assertEquals("the job must have gone to the hardware engine", 1, reporting.attempts)
+        val progressUpdates = updater.infos.drop(1)
+        assertEquals("one throttled progress update expected", 1, progressUpdates.size)
+        assertEquals(
+            PERCENT,
+            progressUpdates.single().notification.extras.getInt(Notification.EXTRA_PROGRESS),
+        )
+    }
+
     /**
      * A worker routed to the software engine, whose engine is [report] and a written output.
      *
@@ -137,7 +173,10 @@ class ProgressNotificationTest {
      * bridge, which is native. [report] is handed the worker's own progress callback, and runs with
      * the worker as its receiver so a test can stop it mid-transcode.
      */
-    private fun workerReporting(report: ConversionWorker.((Int) -> Unit) -> Unit): ConversionWorker {
+    private fun workerReporting(
+        enginePreference: EnginePreference = EnginePreference.FORCE_SOFTWARE,
+        report: ConversionWorker.((Int) -> Unit) -> Unit,
+    ): ConversionWorker {
         val worker = TestListenableWorkerBuilder<ConversionWorker>(
             context = app,
             inputData = workDataOf(
@@ -147,7 +186,7 @@ class ProgressNotificationTest {
                 ConversionWorker.KEY_CONTAINER to SPEC.container.name,
                 ConversionWorker.KEY_VIDEO_CODEC to SPEC.videoCodec.name,
                 ConversionWorker.KEY_AUDIO_CODEC to SPEC.audioCodec.name,
-                ConversionWorker.KEY_ENGINE_PREFERENCE to EnginePreference.FORCE_SOFTWARE.name,
+                ConversionWorker.KEY_ENGINE_PREFERENCE to enginePreference.name,
             ),
             runAttemptCount = 0,
         ).setId(JOB_ID)
@@ -171,6 +210,17 @@ class ProgressNotificationTest {
         const val TICKS = 50
         val SPEC = OutputFormat.MP4_H265.spec
         val JOB_ID: UUID = UUID.fromString("00000000-0000-4000-8000-000000000021")
+
+        /**
+         * A probe the router can actually route. `InputProbe()` reports `UNPARSEABLE`, which
+         * `PERMISSIVE.canDecode` refuses, so every job would reach FFmpeg with no test saying why.
+         */
+        val H264_SOURCE = InputProbe(
+            videoCodec = "h264",
+            audioCodec = "aac",
+            container = Container.MP4,
+            durationMs = 1_000,
+        )
     }
 }
 
@@ -211,3 +261,22 @@ private class ReportingTranscoder(private val report: ((Int) -> Unit) -> Unit) :
         const val OUTPUT_BYTES = 512
     }
 }
+
+/** A hardware engine that reports whatever [report] wants reported, then writes an output. */
+@UnstableApi
+private class ReportingHardwareTranscoder(private val report: ((Int) -> Unit) -> Unit) : HardwareTranscoder {
+
+    var attempts = 0
+
+    override suspend fun transcode(input: Uri, output: File, request: ConversionRequest, onProgress: (Int) -> Unit) {
+        attempts++
+        report(onProgress)
+        output.writeBytes(ByteArray(OUTPUT_BYTES))
+    }
+
+    override fun close() = Unit
+
+    private companion object {
+        const val OUTPUT_BYTES = 16
+    }
+}

docs/coverage-read-findings.md

@@ -1,22 +1,27 @@
 # Coverage-read findings
 
-**Status:** five findings, none fixed, none urgent. F5 was added on 2026-08-27, found while decomposing #132 into children — it had been listed there as a test gap, and is not one. Every entry here is a *code* observation —
-something a test would document rather than repair. The test gaps found in the same read are
-tickets #132 and #133, not entries here; see [Not covered here](#not-covered-here).
-**Scope:** what a JaCoCo read on 2026-08-26 turned up that writing a test would not fix. This is
-a survey, not a work order. Acting on any entry is a separate decision and would be its own commit.
-**Last verified:** `main` at `dc8b7c3`, 2026-08-26. Coverage re-measured that day with
-`./gradlew :app:jacocoTestReport`: **84.9% line (1971/2321), 63.8% branch (900/1410)**, against
-**456 JVM tests in 68 classes**. `CLAUDE.md` quotes 454 in 67 from four hours earlier; the
-percentages are unchanged, so no figure there is stale.
+**Status:** ten findings, none fixed, none urgent. F1-F4 came from the 2026-08-26 read; F5 was added
+on 2026-08-27 while decomposing #132; **F6-F10 were added on 2026-09-02 from the wave-4 read**. Every
+entry here is a *code* observation — something a test would document rather than repair. The test
+gaps found in the same reads are tickets, not entries here; see [Not covered here](#not-covered-here).
+**Scope:** what a JaCoCo read turned up that writing a test would not fix. This is a survey, not a
+work order. Acting on any entry is a separate decision and would be its own commit.
+**Last verified:** `main` at `54ca2dd`, 2026-09-02. Coverage measured that day with
+`./gradlew :app:jacocoTestReport`: **92.8% line (2183/2352), 81.3% branch (1091/1342)**, against
+**584 JVM tests in 87 classes**, matching what `CLAUDE.md` quotes.
+
+The wave-4 read that produced F6-F10 also produced twelve test tickets, **#192-#203**, plus **#204**
+for four candidates whose cost was not obviously worth paying. The split between them is the same one
+this document has always drawn: a ticket is where a test goes, an entry here is where a test would not
+help.
 
 ## Why this document is separate from `defect-audit.md`
 
 `defect-audit.md` is the record of the 2026-08-22 defect sweep: sixteen entries, each a thing that
 is *wrong at runtime*. Nothing here is wrong at runtime today. These are arms that cannot be
-reached, accessors nobody calls, and one KDoc that contradicts the code beside it — the category
-`defect-audit.md` calls **latent**, plus one that is not a defect at all and is recorded so the
-next coverage read does not re-file it.
+reached, accessors nobody calls, and two KDocs that contradict the code beside them — the category
+`defect-audit.md` calls **latent**, plus several that are not defects at all and are recorded so the
+next coverage read does not re-file them.
 
 They are here rather than in that document because folding them in would inflate a sixteen-entry
 audit whose status metadata has already gone stale once, and because they share a provenance:
@@ -24,7 +29,7 @@ every one fell out of reading a coverage report, and every one is the kind of th
 report is *good* at surfacing and a test is bad at fixing. F5 is the clearest case — it was filed
 as a test gap first, and only stopped being one when someone went looking for its callers.
 
-Entry ids are `F1`–`F5` so they cannot be confused with `defect-audit.md`'s `D1`–`D16`.
+Entry ids are `F1`–`F10` so they cannot be confused with `defect-audit.md`'s `D1`–`D16`.
 
 ## How to read the confidence labels
 
@@ -262,6 +267,179 @@ no way to make it happen now.
 
 ---
 
+## F6 — Four more arms that cannot be reached, and one KDoc among them that is false
+
+**Severity: low · Confirmed by inspection · F4's family, found in the wave-4 read**
+
+```
+app/src/main/java/org/libremediaconverter/model/ConversionRouter.kt:178-179
+app/src/main/java/org/libremediaconverter/model/ConversionRouter.kt:221
+app/src/main/java/org/libremediaconverter/model/ContainerCapabilities.kt:297
+app/src/main/java/org/libremediaconverter/model/ContainerCapabilities.kt:324, :340
+```
+
+Four sites that a coverage report flags and that no test can reach. Each is recorded with the
+upstream guard that makes it unreachable, because that guard is what would have to change first.
+
+- **`ConversionRouter:178-179`** — the missed branch is `orEmpty()`'s absent-key arm on
+  `MEDIA3_MUXABLE_VIDEO[plan.container]`. `MEDIA3_CONTAINERS` is `setOf(MP4)` and `route()` returns at
+  `:104` for anything else, so `media3CanMux` only ever sees MP4, which both maps key. Same function
+  as F4's second pair, one line below it.
+- **`ConversionRouter:221`** — `DeviceCodecs.PERMISSIVE.canDecode` returning **false** for
+  `InputProbe.UNPARSEABLE`. `PERMISSIVE` has no production caller at all (tests only), and the
+  router's one `canDecode` call at `:128` is already preceded by `:117` returning FFMPEG for
+  `UNPARSEABLE`. **Its KDoc at `:214-217` is false as written:**
+
+  > That exception matters: a device double that claims it can decode an unparseable file would let
+  > the router send a doomed job to Media3.
+
+  It would not — `:117` already caught it. This is F2's shape: a comment that describes a hazard the
+  code upstream has removed. Correcting it is a one-line change and should not be bundled with
+  anything.
+- **`ContainerCapabilities:297`** — `if (container == GIF || container == IMAGE_SEQUENCE) return null`
+  in `repair`. `repair`'s only caller is `suggestions` (`:281`); `validate` returns at `:121` for
+  `isImageOutput` (which is exactly GIF ∥ IMAGE_SEQUENCE) before `suggestions` is reached, and
+  `firstContainerHolding` filters on `CARRIES_VIDEO`, which is empty for both.
+- **`ContainerCapabilities:324` and `:340`** — the `else ->` arms themselves are exercised; what is
+  missed is the elvis tail, `firstOrNull() ?: VideoCodec.NONE` / `?: AudioCodec.NONE`. Reaching it
+  needs a container with no encodable codec on that axis. Audio-only containers return early at
+  `:307`, and the only containers with an empty audio set are GIF and IMAGE_SEQUENCE, excluded at
+  `:297` above.
+
+**Recorded so the next read does not re-file them.** F4's rule applies unchanged: a second line of
+defence that can be provoked is not a second line of defence, and widening a private function to make
+one reachable buys a test that asserts a fallback fires when called in a way production cannot call
+it.
+
+---
+
+## F7 — `probeWithExtractor`'s catch is unreachable for the same measured reason `probeForConcat`'s is
+
+**Severity: n/a · No action · completes a measurement already on record**
+
+```
+app/src/main/java/org/libremediaconverter/convert/MediaProbe.kt:180-182
+```
+
+```kotlin
+} catch (e: Exception) {
+    Log.i(TAG, "Platform extractor could not read $uri.", e)
+    null
+}
+```
+
+`CLAUDE.md` records the measurement for the *other* extractor site: Robolectric's `MediaExtractor`
+never throws from `setDataSource`, checked across an unregistered `content://` authority, a missing
+`file://`, a file of garbage bytes and an `http://` URL — all four returned with `trackCount = 0`.
+
+`probeWithExtractor` calls the same overload, three lines apart in the same file, and the measurement
+covers it identically. It was simply not written down for this site, so a future read would re-derive
+it. It stays device-only, alongside `probeForConcat`'s.
+
+**Two neighbouring line counts are artifacts of this, not separate gaps.** `MediaProbe:184` and
+`:331` each report 27 missed instructions and are the `finally` block's synthetic exception-path copy
+— JaCoCo duplicates a `finally` per exit path, and the exceptional one is unreachable for the reason
+above. Do not read them as a third and fourth site.
+
+---
+
+## F8 — Three more dead members, and six unused defaults
+
+**Severity: low · Confirmed by inspection · F3's family**
+
+```
+app/src/main/java/org/libremediaconverter/model/CopyPlanner.kt:28          ConversionPlan.hasVideo
+app/src/main/java/org/libremediaconverter/codec/AndroidDeviceCodecs.kt:39  hardwareEncoders()
+app/src/main/java/org/libremediaconverter/ffmpeg/ConcatEngine.kt:30        Result.output
+app/src/main/java/org/libremediaconverter/convert/Transcoders.kt:28, :29, :40, :61
+app/src/main/java/org/libremediaconverter/work/Reattachment.kt:28, :30
+```
+
+- **`ConversionPlan.hasVideo`** — zero callers in `main`, `test` or `androidTest`. Every `hasVideo`
+  hit in the tree is `InputProbe.hasVideo`, `OutputSpec.hasVideo` or `Container.extensionFor(hasVideo)`,
+  which are different properties on different types. A test asserting
+  `plan.hasVideo == (plan.video != VideoPlan.Drop)` is vacuous by construction.
+- **`AndroidDeviceCodecs.hardwareEncoders()`** — its only caller is `RealMediaBenchmark`, in
+  `androidTest`. Production reads capabilities through `DeviceCodecs`, never the raw set.
+- **`ConcatEngine.Result.output`** — `ConcatWorker` reads `result.strategy` and uses the `staged`
+  file it passed in, never `.output`.
+- **`Transcoders.kt`'s default arguments** — `request` and `onProgress` on
+  `HardwareTranscoder.transcode` (`:28`, `:29`), `onProgress` on `SoftwareTranscoder.run` (`:40`),
+  and `format` on `ConcatJoiner.join` (`:61`). All three production call sites
+  (`ConversionWorker.kt:208`, `:234`, `ConcatWorker.kt:79`) pass every argument, so the synthesised
+  `$default` bridges and `$DefaultImpls` copies are never entered. The
+  `request: ConversionRequest = ConversionRequest(OutputFormat.MP4_H265.spec)` default is the one
+  worth a second look: nothing anywhere omits it, so an interface silently promises H.265 to a
+  caller that does not exist.
+- **`JobSnapshot`'s `outputModifiedAt` and `tags` defaults** — `JobSnapshots.kt:32-42` passes all
+  seven fields, so the synthesised `$default` constructor (20 missed instructions at
+  `Reattachment.kt:14`) is never entered.
+
+**Not a test gap, for F3's reason.** Delete them, or keep them and know they are unused; either is a
+decision, and a test restating the compiler is not.
+
+---
+
+## F9 — Both workers' `getForegroundInfo` overrides are dead, and this is why
+
+**Severity: n/a · No action · sharpens #88 rather than reopening it**
+
+```
+app/src/main/java/org/libremediaconverter/work/ConversionWorker.kt:342-346
+app/src/main/java/org/libremediaconverter/work/ConcatWorker.kt:132-136
+```
+
+**#88 already closed on these**, after reading both and finding no decision worth a seam — the
+correct call, and it stands. What #88 did not name is the reason they are cold in the first place,
+which is stronger than "the JVM cannot reach them":
+
+WorkManager calls `getForegroundInfoAsync()` **only for expedited work**. `ConversionWorker`'s own
+KDoc says expedited is deliberately not used, and `grep -rn 'setExpedited\|OutOfQuotaPolicy' app/src`
+returns nothing. So both overrides are dead in production today, not merely untested — a test would
+assert the shape of something nothing invokes.
+
+They are still correct to keep: `ForegroundInfo` is required by the `CoroutineWorker` contract and
+`setForeground` is called explicitly elsewhere. **What would reopen this** is the same trigger #88
+named — a `getForegroundInfo` that starts branching — plus one more: the day anything calls
+`setExpedited`.
+
+---
+
+## F10 — Three arms that are reachable, uncovered, and cannot be made to bite
+
+**Severity: n/a · No action · the shape a coverage number cannot distinguish**
+
+```
+app/src/main/java/org/libremediaconverter/convert/ConversionViewModel.kt:550, :553
+app/src/main/java/org/libremediaconverter/join/JoinViewModel.kt:349, :352, :278
+```
+
+F4 and F6 hold arms that cannot be *reached*. These can — and a test written against them would still
+pass under the mutation that ought to redden it, which is the harder case to spot and the more
+expensive one to discover halfway through writing the test.
+
+- **`observer?.cancel()`'s non-null arm** (`ConversionViewModel:550`, `JoinViewModel:349`). Reachable
+  by calling `convert()` twice. But `ScreenOwnership`'s token is what actually blocks the superseded
+  write — the ViewModel's own KDoc at `reset()` says the cancel is "a request honoured at the next
+  suspension point" and "the claim is what actually stops that write". Delete `observer?.cancel()`
+  and the suite stays green, correctly.
+- **`if (info == null) return@collect`** (`ConversionViewModel:553`, `JoinViewModel:352`). Reachable
+  through `pruneWork()`. But when the null arrives the state is already terminal, so removing the
+  guard crashes the collector and **leaves the state unchanged** — a state assertion is green under
+  the mutation. The only observable is an escaped coroutine exception, which the ViewModel's own KDoc
+  documents as unreliable on the JVM: kotlinx-coroutines-test's process-wide collector hands it to
+  whichever `runTest` starts next.
+- **`JoinViewModel:278`'s `Ambiguous` arm.** Looks like the twin of `ReattachGuardsTest`'s "a result
+  two jobs both claim", and is not. An `Ambiguous` requires a shared `outputPath`, so it can only be a
+  *finished* job — which maps to `Joined`, a state that reads nothing from `inputs`. **The Convert-side
+  twin does bite**, because `displayNameOf(tags)` reaches the file card; the asymmetry is the point.
+
+**Recorded because each of these was picked up as a candidate and put down again.** The wave-4 read
+lost time to all three before the mutation test was run in the head rather than the editor, which is
+the cheaper order.
+
+---
+
 ## Summary
 
 | ID | Finding | Severity | Evidence | Action |
@@ -271,12 +449,23 @@ no way to make it happen now.
 | F3 | `ConversionRequest.videoCodec` / `.audioCodec` have no callers | low | confirmed by inspection | delete, or keep for symmetry — **not** a test gap |
 | F4 | Two private guards reachable only by direct call | n/a | confirmed by inspection | **no action** — named exemption, per #88 |
 | F5 | `ConversionNotifications.areEnabled()` is never called | low | confirmed by inspection; grep returns the declaration only | **decide**: act on it or delete it — **not** a test gap |
+| F6 | Four more unreachable arms; `ConversionRouter:214-217`'s KDoc is false | low | confirmed by inspection; each traced to its upstream guard | **no action**, except the one-line KDoc fix |
+| F7 | `probeWithExtractor`'s catch is unreachable, as `probeForConcat`'s is | n/a | measured across four URI shapes (recorded in `CLAUDE.md`) | **no action** — device-only, now written down for both sites |
+| F8 | Three more dead members and six unused defaults | low | confirmed by inspection; grep per member | delete or keep knowingly — **not** a test gap |
+| F9 | Both `getForegroundInfo` overrides are dead: expedited work is never used | n/a | confirmed by inspection; `grep setExpedited` returns nothing | **no action** — sharpens #88's close |
+| F10 | Three reachable arms where no mutation bites | n/a | confirmed by inspection; each mutation traced to its masking guard | **no action** — recorded to stop the next read re-picking them |
 
 Order, if these are acted on: **F1 and F5 first, separately.** They are the two with a possible
 user-visible answer — a format the app can produce and does not offer, and a warning the app
-documents and does not give — and either answer changes what the tidying should look like. F2 and F3
-are tidying and belong in one commit with each other, not with F1 or F5. F4 is finished by being
-written down.
+documents and does not give — and either answer changes what the tidying should look like. F2, F3 and
+F8 are tidying and belong in one commit with each other, not with F1 or F5. F6's KDoc correction is a
+third kind: one line, no decision, and it should not wait on the tidying. F4, F7, F9 and F10 are
+finished by being written down.
+
+**Six of the ten are now "no action" or "not a test gap", and that is the useful shape.** By wave 4
+the report's remaining red is mostly this: arms nothing can reach, members nothing calls, and arms a
+test can reach but not pin. A coverage number cannot tell any of them from a real gap, which is why
+this document exists and why it grows faster than the percentage moves.
 
 **F1 and F5 share a shape worth naming:** both are places where a comment describes behaviour the
 code does not have, and in both the tempting fix (delete the dead arm, test the dead method) would
@@ -287,7 +476,15 @@ freeze the wrong answer in place. The decision comes first.
 **The test gaps from the same read.** Seven JVM-side gaps (**#132**) and three seam questions
 (**#133**) came out of this coverage read and are tracked there, because they are work rather than
 observations. This document holds only what a test would not fix. #133 also records why
-`AndroidDeviceCodecs.probe()` was considered and left out, so that spike is not run a third time.
+`AndroidDeviceCodecs.probe()` was considered and left out **through `ShadowMediaCodecList`**, so that
+spike is not run a third time.
+
+**Updated 2026-09-02:** #194 proposes reaching the same code through a *pure seam* instead, which is a
+different mechanism and one #133 did not evaluate — the builder objection it turns on (no
+`setIsAlias`, no `setCanonicalName`) does not apply to a function taking its own entry type. #133's
+close stands for the shadow; it is not a close on the seam. #194 also carries the reason the seam is
+worth cutting at all, which is not coverage: the `runCatching` fallback logs "assuming permissive" and
+returns empty sets, which makes `canEncode` and `canDecode` answer *no* for everything.
 
 **`ConversionForegroundType.current()`**, which looked like the sharpest gap in the read and is not.
 Its API 33 and 34 arms are cold on the JVM, but issue **#88** already established that the class is
@@ -321,6 +518,25 @@ the real ones — **34 of 383** and **20 of 143** missed — and the screens are
 better-covered files in the repo, which is what #52, #57 and #61 were for. **Do not chase the
 branch number here.** If a future read wants a screen metric, use lines.
 
+**Updated 2026-09-02: the same codegen inflates the *instruction* count, which wave 3's filter did
+not allow for.** Wave 3 selected candidates on `mi > 0` — at least one missed instruction — which was
+right to prefer over a bare branch count and is still wrong on these files. `JoinScreen.kt:222` reads
+`mi=10` and looks uncovered; it also reads `ci=38`, and `JoinStateAffordancesTest` already clicks that
+Save button and asserts `save:joined.mp4`. Every `onClick` lambda body flagged this way turned out to
+be covered at method level, the missed instructions being the recomposition-skip path again.
+
+Use `ci == 0` — the line never executed, which is JaCoCo's own missed-line definition — and pair it
+with a method-level `ci > 0 && mb > 0` pass for covered methods with cold arms. Neither filter alone
+is enough: `ConversionViewModel.cancel()` misses no line at all, yet its non-null arm had never been
+entered in 584 tests (#192). `CLAUDE.md`'s coverage entry carries the same correction.
+
+**Also codegen, also not gaps**, recorded once so they are not re-derived: the synthetic
+`NoWhenBranchMatchedException` closing an exhaustive `when` (`ConverterScreen:399`, `:686`,
+`JoinScreen:278`, `MainActivity:160`); the inner `is Idle -> Unit` arms at `ConverterScreen:253-254`
+and `JoinScreen:158-159`, which are structurally unreachable because the outer `when` already routed
+`Idle`; and the closing brace of a `launch` block whose `collect` never terminates
+(`ConversionViewModel:578`, `JoinViewModel:371`).
+
 **Anything requiring a device.** `MediaProbe`'s FFprobe half (`MediaProbe.kt:151, 156-158, 173-188`)
 and `FFmpegEngine` in full report 0% on the JVM and are covered by `androidTest`. JaCoCo measures
 `testDebugUnitTest` only; their zeroes are a boundary, as #84, #85, #86 and #88 each recorded