Merge branch 'main' into test/audio-drop-arm

Make a failure that says nothing still say something

CLAUDE.md

@@ -184,11 +184,29 @@ install for code that can never run — and on API 37 the full APK does not fit
   - **coverage gaps** — the line never executes. Filtered to sites where JaCoCo reports `mi > 0`, a
     concrete instruction no test runs, which is what separates a real gap from a partial branch on
     a compound condition. That filter cut the candidate list roughly in half and was right to.
+    **Wave 4 found it wrong in both directions, though — use the two filters below instead.**
   - **assertion gaps** — JaCoCo is green and nothing checks the answer. `MainActivity`'s rail and
     bottom bar were both *executed* by `AppRootRestorationTest` and **transposing them passed the
     entire suite**; so did swapping the two progress-notification strings, and swapping `Content`'s
     two destinations. No coverage number would ever have found any of the three.
 
+  **Wave 4 (2026-09-02) corrected that first filter, and the correction is the reusable part.**
+  `mi > 0` fails in both directions. It *over-reports* on Compose: `JoinScreen.kt:222` reads
+  `mi=10` and also `ci=38`, and `JoinStateAffordancesTest` already clicks that Save button and
+  asserts `save:joined.mp4` — the missed instructions are the synthesized `$changed`/`$dirty`
+  recomposition-skip path, the same codegen this file already warns about for *branch* counts,
+  showing up in the instruction count too. And it *under-reports* on warm methods with cold arms:
+  `ConversionViewModel.cancel()` misses no line, yet `activeWorkId?.let(...)` had only ever been
+  entered on the null side in 584 tests. Use two filters together instead:
+
+  - **`ci == 0`** — the line never executed. This is JaCoCo's own missed-line definition, so it
+    totals exactly the reported missed-line count and needs no judgement.
+  - **`ci > 0 && mb > 0` at method level** — a covered method with an arm nothing takes. This is
+    the only one that finds the `cancel()` shape.
+
+  Of wave 4's 251 missed branches, just **18** sat on lines that do execute, so the branch gap and
+  the line gap are largely the same gap; the second filter is about which of them are reachable.
+
   So **every ticket named the mutation that had to go red, and that was its acceptance criterion
   rather than a coverage delta**. It caught **two vacuous tests written in the same session**,
   before either shipped:
@@ -236,6 +254,35 @@ install for code that can never run — and on API 37 the full APK does not fit
 
   And **re-measure before quoting**: this entry was once written quoting 81.4%, measured four hours
   earlier, and was already three points stale by the time it was ready to merge.
+
+  **Wave 4's read (2026-09-02) moved no number at all, and that is its result.** It was a triage
+  rather than a test push: twelve tickets (**#192-#203**), four deferred candidates (**#204**), and
+  five findings (**F6-F10** in `docs/coverage-read-findings.md`). What it establishes is the shape
+  of what is left, which is different again from wave 3's:
+
+  - Of 169 never-executed lines, **81 are native or device edges and stay that way** —
+    `FFmpegEngine` 33, `Media3Engine` 24, `ConcatEngine` 14, `MainActivity.onCreate` 10 — their
+    zeroes being the `testDebugUnitTest`-only measurement boundary that #84, #85, #86 and #88 each
+    recorded before. A further **34 are device-bound only until a seam moves them**:
+    `AndroidDeviceCodecs` 20 (#194) and the 14 of `MediaProbe`'s 26 that are `readMediaInformation`
+    (#195). Do not read that second group as exempt — the two tickets exist because it is not.
+  - Most of the rest is **already closed with a reason on record**, or compiler-generated: default-arg
+    bridges, DI factory lambdas, synthetic `NoWhenBranchMatchedException` arms, coroutine completion.
+  - Six of the ten findings in that document are now "no action" or "not a test gap". By this point
+    the report's remaining red is mostly arms nothing can reach, members nothing calls, and arms a
+    test *can* reach but cannot pin — and a coverage number tells none of them apart.
+
+  **The biggest single gap it found was not a missed line.** `ConversionViewModel.cancel()` and
+  `JoinViewModel.cancel()` report every line covered; only the null arm of
+  `activeWorkId?.let(workManager::cancelWorkById)` had ever been entered, so nothing in 584 tests
+  connected the Cancel button to WorkManager (#192). That is what the second filter above is for.
+
+  It also re-opened a mechanism, not a close: #86 and #133 ruled `AndroidDeviceCodecs.probe()` out
+  **through `ShadowMediaCodecList`**, on the grounds that the builder cannot set `isAlias` or
+  `canonicalName`. A pure seam does not have that constraint, and #133 did not evaluate one. Read
+  #194 before re-arguing either way — and note the reason it is worth cutting is not coverage but
+  that the `runCatching` fallback logs "assuming permissive" while returning empty sets, which makes
+  `canEncode` and `canDecode` answer *no* for everything.
 - **Testable code is not done until it is tested.** If a piece is unit testable, it gets unit
   tests before it counts as done. If it is e2e testable, it gets e2e tests. Both clauses apply —
   a change that is both needs both.

app/src/test/java/org/libremediaconverter/convert/CancelReachesWorkManagerTest.kt

@@ -0,0 +1,180 @@
+package org.libremediaconverter.convert
+
+import android.app.Application
+import androidx.media3.common.util.UnstableApi
+import androidx.work.OneTimeWorkRequestBuilder
+import androidx.work.WorkInfo
+import androidx.work.WorkManager
+import androidx.work.workDataOf
+import kotlinx.coroutines.Dispatchers
+import org.junit.After
+import org.junit.Assert.assertEquals
+import org.junit.Before
+import org.junit.Test
+import org.junit.runner.RunWith
+import org.libremediaconverter.join.JoinState
+import org.libremediaconverter.join.JoinViewModel
+import org.libremediaconverter.model.InputProbe
+import org.libremediaconverter.work.ConcatWorker
+import org.libremediaconverter.work.ConversionWorker
+import org.libremediaconverter.work.JobTags
+import org.robolectric.RobolectricTestRunner
+import org.robolectric.RuntimeEnvironment
+import java.util.UUID
+import java.util.concurrent.TimeUnit
+
+/**
+ * That `cancel()` cancels the job, on both screens.
+ *
+ * ## Why this was missing, which is the interesting part
+ *
+ * Both `cancel()` methods are one line — `activeWorkId?.let(workManager::cancelWorkById)` — and
+ * **JaCoCo reports every line of both as covered**. `SettingsEditsTest`'s
+ * `cancelling with no active job does nothing rather than throwing` runs the method, and its own
+ * comment names which half it drives: "`activeWorkId?.let(...)` -- the null side". The other side
+ * had never been entered, and `JoinViewModel.cancel()` had no test at all.
+ *
+ * So no line-level coverage filter could see this. What surfaces it is a method-level read —
+ * `mi=11, ci=7, mb=1, cb=1` on both — a covered method with an arm nothing takes. That is the
+ * second of the two filters #194 records, and this is the gap that argued for it.
+ *
+ * The affordance tests are not this. `ConverterStateAffordancesTest` and `JoinStateAffordancesTest`
+ * click `TestTags.CANCEL` and assert the *action* fires into a stub; `ScreenWiringTest` asserts the
+ * action calls `viewModel.cancel()`. Both halves were pinned and the join between them was not, so
+ * nothing in 584 tests connected the button to WorkManager.
+ *
+ * ## Why the job is enqueued with a delay
+ *
+ * The test WorkManager runs on a `SynchronousExecutor`, so an ordinary request finishes inline —
+ * which is exactly why only the null half was ever covered: by the time a test could call
+ * `cancel()`, `convert()`'s job was already terminal. `setInitialDelay` is what `TestScheduler`
+ * honours, so the job sits in `ENQUEUED` until the test lets it go, and it never does.
+ *
+ * **Production never sets a delay**, so the request is built here rather than through
+ * `ConversionWorker.request`. The *state* is not synthetic: `ENQUEUED` at `runAttemptCount == 0` is
+ * what every job passes through before the scheduler picks it up, `Reattachment.choose` ranks it
+ * `QUEUED`, and `conversionStateFrom` maps it to `Converting(input, 0)`. The delay changes how long
+ * the job stays in a real state, not which state it is in.
+ *
+ * ## What is asserted, and in which order
+ *
+ * WorkManager's own record first, then the screen. The screen alone would be a weaker claim than it
+ * looks: `CANCELLED` maps to `Idle` for a reattached job, and `Idle` is also where a ViewModel that
+ * did nothing at all would sit.
+ */
+@UnstableApi
+@RunWith(RobolectricTestRunner::class)
+class CancelReachesWorkManagerTest {
+
+    private lateinit var app: Application
+    private lateinit var workManager: WorkManager
+
+    @Before
+    fun setUp() {
+        app = RuntimeEnvironment.getApplication()
+        ConversionDependencies.publisher = { RecordingPublisher(app) }
+        ConversionDependencies.probe = { _, _ -> InputProbe() }
+        installTestWorkManager(app, workDataOf())
+        workManager = WorkManager.getInstance(app)
+    }
+
+    @After
+    fun tearDown() {
+        ConversionDependencies.reset()
+    }
+
+    @Test
+    fun `cancelling a queued conversion cancels that job`() {
+        val id = enqueueQueuedConversion()
+        val viewModel = ConversionViewModel(app, Dispatchers.Unconfined)
+        awaitState(viewModel.state, "Converting") { it is ConversionState.Converting }
+
+        viewModel.cancel()
+
+        assertEquals(
+            "Cancel must reach WorkManager, not just the screen",
+            WorkInfo.State.CANCELLED,
+            stateOf(id),
+        )
+        awaitState(viewModel.state, "Idle") { it is ConversionState.Idle }
+    }
+
+    @Test
+    fun `cancelling a queued join cancels that job`() {
+        val id = enqueueQueuedJoin()
+        val viewModel = JoinViewModel(app, Dispatchers.Unconfined)
+        awaitState(viewModel.state, "Joining") { it is JoinState.Joining }
+
+        viewModel.cancel()
+
+        assertEquals(
+            "Cancel must reach WorkManager, not just the screen",
+            WorkInfo.State.CANCELLED,
+            stateOf(id),
+        )
+        awaitState(viewModel.state, "Idle") { it is JoinState.Idle }
+    }
+
+    /**
+     * The negative that bounds both: cancelling must cancel the job the screen is showing, and only
+     * that one.
+     *
+     * Without this, `cancel()` could cancel everything in the queue — `cancelAllWork()` in place of
+     * `cancelWorkById(activeWorkId)` — and both tests above would still pass.
+     */
+    @Test
+    fun `cancelling one conversion leaves another queued job alone`() {
+        val bystander = enqueueQueuedConversion(displayName = "beach.mp4")
+        val id = enqueueQueuedConversion(displayName = "holiday.mp4")
+        val viewModel = ConversionViewModel(app, Dispatchers.Unconfined)
+        val converting = awaitState(viewModel.state, "Converting") { it is ConversionState.Converting }
+        val onScreen = (converting as ConversionState.Converting).input.displayName
+
+        viewModel.cancel()
+
+        // Which of the two the ViewModel reattached to is the query's business, not this test's --
+        // the comparator leaves queued jobs tied deliberately, per Reattachment's ordering notes.
+        // So assert the shape rather than the identity: exactly one is cancelled, and the other is
+        // untouched.
+        val cancelled = listOf(id, bystander).filter { stateOf(it) == WorkInfo.State.CANCELLED }
+        assertEquals(
+            "exactly one job may be cancelled, with $onScreen on screen",
+            1,
+            cancelled.size,
+        )
+    }
+
+    private fun stateOf(id: UUID): WorkInfo.State =
+        requireNotNull(workManager.getWorkInfoById(id).get()) { "no WorkInfo for $id" }.state
+
+    /**
+     * A conversion sitting in the queue, which is where every job starts.
+     *
+     * Built by hand rather than through `ConversionWorker.request` for the reason in the class
+     * KDoc; the display-name tag is included because `reattach()` reads it for the file card, and a
+     * job without one would exercise the `UNKNOWN_INPUT_NAME` fallback instead of this test's
+     * subject.
+     */
+    private fun enqueueQueuedConversion(displayName: String = "holiday.mp4"): UUID {
+        val request = OneTimeWorkRequestBuilder<ConversionWorker>()
+            .addTag(JobTags.displayName(displayName))
+            .setInitialDelay(QUEUE_HOLD_HOURS, TimeUnit.HOURS)
+            .build()
+        workManager.enqueue(request).result.get()
+        return request.id
+    }
+
+    private fun enqueueQueuedJoin(inputCount: Int = 2): UUID {
+        val request = OneTimeWorkRequestBuilder<ConcatWorker>()
+            .addTag(JobTags.inputCount(inputCount))
+            .setInitialDelay(QUEUE_HOLD_HOURS, TimeUnit.HOURS)
+            .build()
+        workManager.enqueue(request).result.get()
+        return request.id
+    }
+
+    private companion object {
+        /** Long enough that `TestScheduler` never releases the job during a test run. */
+        const val QUEUE_HOLD_HOURS = 1L
+    }
+}

app/src/test/java/org/libremediaconverter/convert/MessagelessFailureTest.kt

@@ -0,0 +1,213 @@
+package org.libremediaconverter.convert
+
+import android.app.Application
+import android.net.Uri
+import androidx.media3.common.util.UnstableApi
+import androidx.work.Data
+import androidx.work.ListenableWorker
+import androidx.work.testing.TestListenableWorkerBuilder
+import androidx.work.workDataOf
+import kotlinx.coroutines.Dispatchers
+import kotlinx.coroutines.runBlocking
+import org.junit.After
+import org.junit.Assert.assertEquals
+import org.junit.Assert.assertNotNull
+import org.junit.Assert.assertTrue
+import org.junit.Before
+import org.junit.Test
+import org.junit.runner.RunWith
+import org.libremediaconverter.join.JoinState
+import org.libremediaconverter.join.JoinViewModel
+import org.libremediaconverter.model.ConversionRequest
+import org.libremediaconverter.model.EnginePreference
+import org.libremediaconverter.model.InputProbe
+import org.libremediaconverter.model.OutputFormat
+import org.libremediaconverter.work.ConcatWorker
+import org.libremediaconverter.work.ConversionWorker
+import org.robolectric.RobolectricTestRunner
+import org.robolectric.RuntimeEnvironment
+import java.io.File
+import java.util.UUID
+
+/**
+ * A failure that says nothing still has to say something.
+ *
+ * Three sites, all `ci == 0` before this file, and all the same rule:
+ *
+ * ```
+ * work/ConversionWorker.kt:316     cause.message ?: GENERIC_FAILURE_MESSAGE
+ * convert/ConversionViewModel.kt:631   e.message ?: SAVE_FAILED_MESSAGE
+ * join/JoinViewModel.kt:416           e.message ?: SAVE_FAILED_MESSAGE
+ * ```
+ *
+ * Every existing test throws *with* a message, so the right-hand side had never been evaluated
+ * anywhere in the suite. A `Throwable` carrying none is not exotic — `RuntimeException()`,
+ * `IOException()` and most platform exceptions raised without an argument all have a null message.
+ *
+ * ## Held in one class, against the ticket's suggestion
+ *
+ * #193 proposed putting each case beside the behaviour it neighbours. They are together instead,
+ * because they are one rule at three layers and because the trap below has to be explained once
+ * rather than three times. `FailedSaveRetryTest` sets the precedent for both ViewModels in one
+ * file; this extends it by one worker.
+ *
+ * ## The trap, which is why the worker case asserts what it does
+ *
+ * `ConversionStateMappingTest`'s *"a failure with nothing said still says something"* looks like it
+ * already covers the worker site. It does not: it drives the **read** side, `map(FAILED, Data.EMPTY)`,
+ * and that side has a fallback of its own (`ConversionViewModel.kt:147-149`):
+ *
+ * ```kotlin
+ * update.outputData.getString(ConversionWorker.KEY_ERROR)
+ *     ?.takeIf { it.isNotBlank() }
+ *     ?: ConversionWorker.GENERIC_FAILURE_MESSAGE
+ * ```
+ *
+ * So mutating the worker's fallback to `.orEmpty()` writes `KEY_ERROR to ""`, and the ViewModel
+ * turns that straight back into the same constant. **A test asserting on the resulting `Failed`
+ * state stays green under the mutation**, which is most likely why the write-side fallback survived
+ * three waves of test work. The worker case therefore reads `KEY_ERROR` off the worker's own
+ * `Result`, before anything downstream can repair it.
+ *
+ * The two save cases have no such second line: both write `_state.value` directly, so the state is
+ * the right thing to assert there.
+ */
+@UnstableApi
+@RunWith(RobolectricTestRunner::class)
+class MessagelessFailureTest {
+
+    private lateinit var app: Application
+    private lateinit var publisher: RecordingPublisher
+    private lateinit var staged: File
+
+    @Before
+    fun setUp() {
+        app = RuntimeEnvironment.getApplication()
+        publisher = RecordingPublisher(app)
+        ConversionDependencies.publisher = { publisher }
+        ConversionDependencies.probe = { _, _ -> InputProbe() }
+        staged = publisher.createStagingFile("holiday.mp4").apply { writeBytes(ByteArray(4096)) }
+    }
+
+    @After
+    fun tearDown() {
+        ConversionDependencies.reset()
+    }
+
+    /**
+     * The engine gives up without saying why, which is what a native crash looks like from here.
+     *
+     * Asserted on the worker's own output `Data` rather than on a screen — see the class KDoc.
+     */
+    @Test
+    fun `a conversion that fails without a message still reports one`() {
+        installTestWorkManager(app, Data.EMPTY)
+        ConversionDependencies.software = { MessagelessTranscoder }
+
+        val result = runBlocking { failingWorker().doWork() }
+
+        assertTrue("the job must fail rather than retry, got $result", result is ListenableWorker.Result.Failure)
+        assertEquals(
+            "a failure with no message must still put something on screen",
+            ConversionWorker.GENERIC_FAILURE_MESSAGE,
+            (result as ListenableWorker.Result.Failure).outputData.getString(ConversionWorker.KEY_ERROR),
+        )
+    }
+
+    @Test
+    fun `a save that fails without a message still reports one`() {
+        installTestWorkManager(app, conversionOutput())
+        val viewModel = ConversionViewModel(app, Dispatchers.Unconfined)
+        viewModel.onInputPicked(Uri.parse("content://test/holiday.mkv"))
+        awaitState(viewModel.state, "Ready") { it is ConversionState.Ready }
+        viewModel.convert()
+        awaitState(viewModel.state, "Converted") { it is ConversionState.Converted }
+
+        publisher.publishFailure = RuntimeException()
+        viewModel.save(DESTINATION)
+
+        val failed = awaitState(viewModel.state, "Failed") { it is ConversionState.Failed } as ConversionState.Failed
+        assertEquals(SAVE_FAILED_MESSAGE, failed.message)
+        // The handle travels even on the wordless path. Without this, a fallback that also dropped
+        // `pending` would pass -- and the file would be unreachable from the screen that just said
+        // the save failed.
+        assertNotNull("a wordless failure must still offer the file again", failed.retry)
+    }
+
+    @Test
+    fun `a join save that fails without a message still reports one`() {
+        installTestWorkManager(app, joinOutput())
+        val viewModel = JoinViewModel(app, Dispatchers.Unconfined)
+        viewModel.onInputsPicked(listOf(Uri.parse("content://test/a.mp4"), Uri.parse("content://test/b.mp4")))
+        awaitState(viewModel.state, "Ready") { it is JoinState.Ready }
+        viewModel.join()
+        awaitState(viewModel.state, "Joined") { it is JoinState.Joined }
+
+        publisher.publishFailure = RuntimeException()
+        viewModel.save(DESTINATION)
+
+        val failed = awaitState(viewModel.state, "Failed") { it is JoinState.Failed } as JoinState.Failed
+        assertEquals(SAVE_FAILED_MESSAGE, failed.message)
+        assertNotNull("a wordless failure must still offer the file again", failed.retry)
+    }
+
+    /**
+     * `FORCE_SOFTWARE` so the failure comes straight out of `runFFmpeg`.
+     *
+     * `AUTO` would enter `runMedia3OrFallBack`, whose catch runs the job a second time in software
+     * — the same exception would arrive, but through a path this test is not about and which
+     * `HardwareFallbackTest` already owns.
+     */
+    private fun failingWorker(): ConversionWorker {
+        val spec = OutputFormat.MP4_H265.spec
+        return TestListenableWorkerBuilder<ConversionWorker>(
+            context = app,
+            inputData = workDataOf(
+                ConversionWorker.KEY_INPUT_URI to "file:///tmp/holiday.mp4",
+                ConversionWorker.KEY_DISPLAY_NAME to "holiday.mp4",
+                ConversionWorker.KEY_CONTAINER to spec.container.name,
+                ConversionWorker.KEY_VIDEO_CODEC to spec.videoCodec.name,
+                ConversionWorker.KEY_AUDIO_CODEC to spec.audioCodec.name,
+                ConversionWorker.KEY_ENGINE_PREFERENCE to EnginePreference.FORCE_SOFTWARE.name,
+            ),
+            runAttemptCount = 0,
+        ).setId(JOB_ID).build()
+    }
+
+    private fun conversionOutput() = workDataOf(
+        ConversionWorker.KEY_OUTPUT_PATH to staged.absolutePath,
+        ConversionWorker.KEY_SUGGESTED_NAME to SUGGESTED_NAME,
+        ConversionWorker.KEY_MIME_TYPE to JOB_MIME_TYPE,
+    )
+
+    private fun joinOutput() = workDataOf(
+        ConcatWorker.KEY_OUTPUT_PATH to staged.absolutePath,
+        ConcatWorker.KEY_SUGGESTED_NAME to SUGGESTED_NAME,
+        ConcatWorker.KEY_MIME_TYPE to JOB_MIME_TYPE,
+    )
+
+    private companion object {
+        val DESTINATION: Uri = Uri.parse("content://test/destination.mp4")
+        val JOB_ID: UUID = UUID.fromString("00000000-0000-4000-8000-00000000019a")
+        const val SUGGESTED_NAME = "holiday.mp4"
+        const val JOB_MIME_TYPE = "video/mp4"
+    }
+}
+
+/**
+ * An engine that gives up without saying why.
+ *
+ * `RuntimeException()` rather than a subclass with a blank message: `Throwable.message` is *null*
+ * here, which is the case the elvis exists for. A blank-but-present message takes the left-hand
+ * side and is a different path — `ConversionStateMappingTest` covers that one, on the read side.
+ */
+@UnstableApi
+private object MessagelessTranscoder : SoftwareTranscoder {
+    override suspend fun run(
+        request: ConversionRequest,
+        inputPath: String,
+        output: File,
+        durationMs: Long,
+        onProgress: (Int) -> Unit,
+    ): Unit = throw RuntimeException()
+}

app/src/test/java/org/libremediaconverter/ffmpeg/FFmpegCommandBuilderTest.kt

@@ -190,6 +190,30 @@ class FFmpegCommandBuilderTest {
         assertPair(cmd(OutputFormat.M4A_AAC), "-b:a", "192k")
     }
 
+    /**
+     * Turning audio off, which the Advanced picker offers and nothing had ever built a command for.
+     *
+     * `audioArgs`' `Drop` arm was `ci == 0`. The suite's only `-an` assertion is in
+     * `gif generates a palette to avoid banding and drops audio`, and that one comes from the image
+     * path (`FFmpegCommandBuilder.kt:79`/`:90`), which emits `-an` directly and never reaches
+     * `audioArgs`. Two sites, one string, one tested.
+     *
+     * It is a live path rather than defensive code: `AdvancedPicker` renders all of
+     * `AudioCodec.entries` including `NONE`, `ContainerCapabilities.validate` permits audio-off
+     * whenever the input has video, and MKV routes the job to FFmpeg.
+     *
+     * Both halves are asserted. `-an` alone would still pass if the arm fell through to the `else`
+     * and emitted an AAC encoder beside it -- a file that is silent because the flag won, carrying
+     * an encoder nobody asked for.
+     */
+    @Test
+    fun `turning audio off drops the track instead of encoding one`() {
+        val args = cmd(OutputSpec(Container.MKV, VideoCodec.H264, AudioCodec.NONE))
+
+        assertTrue("audio turned off must emit -an, got $args", args.contains("-an"))
+        assertFalse("a dropped track must not also carry an encoder, got $args", args.contains("-c:a"))
+    }
+
     @Test
     fun `audio only formats never carry a video encoder`() {
         listOf(OutputFormat.MP3, OutputFormat.FLAC, OutputFormat.WAV, OutputFormat.OPUS)

docs/coverage-read-findings.md

@@ -1,22 +1,27 @@
 # Coverage-read findings
 
-**Status:** five findings, none fixed, none urgent. F5 was added on 2026-08-27, found while decomposing #132 into children — it had been listed there as a test gap, and is not one. Every entry here is a *code* observation —
-something a test would document rather than repair. The test gaps found in the same read are
-tickets #132 and #133, not entries here; see [Not covered here](#not-covered-here).
-**Scope:** what a JaCoCo read on 2026-08-26 turned up that writing a test would not fix. This is
-a survey, not a work order. Acting on any entry is a separate decision and would be its own commit.
-**Last verified:** `main` at `dc8b7c3`, 2026-08-26. Coverage re-measured that day with
-`./gradlew :app:jacocoTestReport`: **84.9% line (1971/2321), 63.8% branch (900/1410)**, against
-**456 JVM tests in 68 classes**. `CLAUDE.md` quotes 454 in 67 from four hours earlier; the
-percentages are unchanged, so no figure there is stale.
+**Status:** ten findings, none fixed, none urgent. F1-F4 came from the 2026-08-26 read; F5 was added
+on 2026-08-27 while decomposing #132; **F6-F10 were added on 2026-09-02 from the wave-4 read**. Every
+entry here is a *code* observation — something a test would document rather than repair. The test
+gaps found in the same reads are tickets, not entries here; see [Not covered here](#not-covered-here).
+**Scope:** what a JaCoCo read turned up that writing a test would not fix. This is a survey, not a
+work order. Acting on any entry is a separate decision and would be its own commit.
+**Last verified:** `main` at `54ca2dd`, 2026-09-02. Coverage measured that day with
+`./gradlew :app:jacocoTestReport`: **92.8% line (2183/2352), 81.3% branch (1091/1342)**, against
+**584 JVM tests in 87 classes**, matching what `CLAUDE.md` quotes.
+
+The wave-4 read that produced F6-F10 also produced twelve test tickets, **#192-#203**, plus **#204**
+for four candidates whose cost was not obviously worth paying. The split between them is the same one
+this document has always drawn: a ticket is where a test goes, an entry here is where a test would not
+help.
 
 ## Why this document is separate from `defect-audit.md`
 
 `defect-audit.md` is the record of the 2026-08-22 defect sweep: sixteen entries, each a thing that
 is *wrong at runtime*. Nothing here is wrong at runtime today. These are arms that cannot be
-reached, accessors nobody calls, and one KDoc that contradicts the code beside it — the category
-`defect-audit.md` calls **latent**, plus one that is not a defect at all and is recorded so the
-next coverage read does not re-file it.
+reached, accessors nobody calls, and two KDocs that contradict the code beside them — the category
+`defect-audit.md` calls **latent**, plus several that are not defects at all and are recorded so the
+next coverage read does not re-file them.
 
 They are here rather than in that document because folding them in would inflate a sixteen-entry
 audit whose status metadata has already gone stale once, and because they share a provenance:
@@ -24,7 +29,7 @@ every one fell out of reading a coverage report, and every one is the kind of th
 report is *good* at surfacing and a test is bad at fixing. F5 is the clearest case — it was filed
 as a test gap first, and only stopped being one when someone went looking for its callers.
 
-Entry ids are `F1`–`F5` so they cannot be confused with `defect-audit.md`'s `D1`–`D16`.
+Entry ids are `F1`–`F10` so they cannot be confused with `defect-audit.md`'s `D1`–`D16`.
 
 ## How to read the confidence labels
 
@@ -262,6 +267,179 @@ no way to make it happen now.
 
 ---
 
+## F6 — Four more arms that cannot be reached, and one KDoc among them that is false
+
+**Severity: low · Confirmed by inspection · F4's family, found in the wave-4 read**
+
+```
+app/src/main/java/org/libremediaconverter/model/ConversionRouter.kt:178-179
+app/src/main/java/org/libremediaconverter/model/ConversionRouter.kt:221
+app/src/main/java/org/libremediaconverter/model/ContainerCapabilities.kt:297
+app/src/main/java/org/libremediaconverter/model/ContainerCapabilities.kt:324, :340
+```
+
+Four sites that a coverage report flags and that no test can reach. Each is recorded with the
+upstream guard that makes it unreachable, because that guard is what would have to change first.
+
+- **`ConversionRouter:178-179`** — the missed branch is `orEmpty()`'s absent-key arm on
+  `MEDIA3_MUXABLE_VIDEO[plan.container]`. `MEDIA3_CONTAINERS` is `setOf(MP4)` and `route()` returns at
+  `:104` for anything else, so `media3CanMux` only ever sees MP4, which both maps key. Same function
+  as F4's second pair, one line below it.
+- **`ConversionRouter:221`** — `DeviceCodecs.PERMISSIVE.canDecode` returning **false** for
+  `InputProbe.UNPARSEABLE`. `PERMISSIVE` has no production caller at all (tests only), and the
+  router's one `canDecode` call at `:128` is already preceded by `:117` returning FFMPEG for
+  `UNPARSEABLE`. **Its KDoc at `:214-217` is false as written:**
+
+  > That exception matters: a device double that claims it can decode an unparseable file would let
+  > the router send a doomed job to Media3.
+
+  It would not — `:117` already caught it. This is F2's shape: a comment that describes a hazard the
+  code upstream has removed. Correcting it is a one-line change and should not be bundled with
+  anything.
+- **`ContainerCapabilities:297`** — `if (container == GIF || container == IMAGE_SEQUENCE) return null`
+  in `repair`. `repair`'s only caller is `suggestions` (`:281`); `validate` returns at `:121` for
+  `isImageOutput` (which is exactly GIF ∥ IMAGE_SEQUENCE) before `suggestions` is reached, and
+  `firstContainerHolding` filters on `CARRIES_VIDEO`, which is empty for both.
+- **`ContainerCapabilities:324` and `:340`** — the `else ->` arms themselves are exercised; what is
+  missed is the elvis tail, `firstOrNull() ?: VideoCodec.NONE` / `?: AudioCodec.NONE`. Reaching it
+  needs a container with no encodable codec on that axis. Audio-only containers return early at
+  `:307`, and the only containers with an empty audio set are GIF and IMAGE_SEQUENCE, excluded at
+  `:297` above.
+
+**Recorded so the next read does not re-file them.** F4's rule applies unchanged: a second line of
+defence that can be provoked is not a second line of defence, and widening a private function to make
+one reachable buys a test that asserts a fallback fires when called in a way production cannot call
+it.
+
+---
+
+## F7 — `probeWithExtractor`'s catch is unreachable for the same measured reason `probeForConcat`'s is
+
+**Severity: n/a · No action · completes a measurement already on record**
+
+```
+app/src/main/java/org/libremediaconverter/convert/MediaProbe.kt:180-182
+```
+
+```kotlin
+} catch (e: Exception) {
+    Log.i(TAG, "Platform extractor could not read $uri.", e)
+    null
+}
+```
+
+`CLAUDE.md` records the measurement for the *other* extractor site: Robolectric's `MediaExtractor`
+never throws from `setDataSource`, checked across an unregistered `content://` authority, a missing
+`file://`, a file of garbage bytes and an `http://` URL — all four returned with `trackCount = 0`.
+
+`probeWithExtractor` calls the same overload, three lines apart in the same file, and the measurement
+covers it identically. It was simply not written down for this site, so a future read would re-derive
+it. It stays device-only, alongside `probeForConcat`'s.
+
+**Two neighbouring line counts are artifacts of this, not separate gaps.** `MediaProbe:184` and
+`:331` each report 27 missed instructions and are the `finally` block's synthetic exception-path copy
+— JaCoCo duplicates a `finally` per exit path, and the exceptional one is unreachable for the reason
+above. Do not read them as a third and fourth site.
+
+---
+
+## F8 — Three more dead members, and six unused defaults
+
+**Severity: low · Confirmed by inspection · F3's family**
+
+```
+app/src/main/java/org/libremediaconverter/model/CopyPlanner.kt:28          ConversionPlan.hasVideo
+app/src/main/java/org/libremediaconverter/codec/AndroidDeviceCodecs.kt:39  hardwareEncoders()
+app/src/main/java/org/libremediaconverter/ffmpeg/ConcatEngine.kt:30        Result.output
+app/src/main/java/org/libremediaconverter/convert/Transcoders.kt:28, :29, :40, :61
+app/src/main/java/org/libremediaconverter/work/Reattachment.kt:28, :30
+```
+
+- **`ConversionPlan.hasVideo`** — zero callers in `main`, `test` or `androidTest`. Every `hasVideo`
+  hit in the tree is `InputProbe.hasVideo`, `OutputSpec.hasVideo` or `Container.extensionFor(hasVideo)`,
+  which are different properties on different types. A test asserting
+  `plan.hasVideo == (plan.video != VideoPlan.Drop)` is vacuous by construction.
+- **`AndroidDeviceCodecs.hardwareEncoders()`** — its only caller is `RealMediaBenchmark`, in
+  `androidTest`. Production reads capabilities through `DeviceCodecs`, never the raw set.
+- **`ConcatEngine.Result.output`** — `ConcatWorker` reads `result.strategy` and uses the `staged`
+  file it passed in, never `.output`.
+- **`Transcoders.kt`'s default arguments** — `request` and `onProgress` on
+  `HardwareTranscoder.transcode` (`:28`, `:29`), `onProgress` on `SoftwareTranscoder.run` (`:40`),
+  and `format` on `ConcatJoiner.join` (`:61`). All three production call sites
+  (`ConversionWorker.kt:208`, `:234`, `ConcatWorker.kt:79`) pass every argument, so the synthesised
+  `$default` bridges and `$DefaultImpls` copies are never entered. The
+  `request: ConversionRequest = ConversionRequest(OutputFormat.MP4_H265.spec)` default is the one
+  worth a second look: nothing anywhere omits it, so an interface silently promises H.265 to a
+  caller that does not exist.
+- **`JobSnapshot`'s `outputModifiedAt` and `tags` defaults** — `JobSnapshots.kt:32-42` passes all
+  seven fields, so the synthesised `$default` constructor (20 missed instructions at
+  `Reattachment.kt:14`) is never entered.
+
+**Not a test gap, for F3's reason.** Delete them, or keep them and know they are unused; either is a
+decision, and a test restating the compiler is not.
+
+---
+
+## F9 — Both workers' `getForegroundInfo` overrides are dead, and this is why
+
+**Severity: n/a · No action · sharpens #88 rather than reopening it**
+
+```
+app/src/main/java/org/libremediaconverter/work/ConversionWorker.kt:342-346
+app/src/main/java/org/libremediaconverter/work/ConcatWorker.kt:132-136
+```
+
+**#88 already closed on these**, after reading both and finding no decision worth a seam — the
+correct call, and it stands. What #88 did not name is the reason they are cold in the first place,
+which is stronger than "the JVM cannot reach them":
+
+WorkManager calls `getForegroundInfoAsync()` **only for expedited work**. `ConversionWorker`'s own
+KDoc says expedited is deliberately not used, and `grep -rn 'setExpedited\|OutOfQuotaPolicy' app/src`
+returns nothing. So both overrides are dead in production today, not merely untested — a test would
+assert the shape of something nothing invokes.
+
+They are still correct to keep: `ForegroundInfo` is required by the `CoroutineWorker` contract and
+`setForeground` is called explicitly elsewhere. **What would reopen this** is the same trigger #88
+named — a `getForegroundInfo` that starts branching — plus one more: the day anything calls
+`setExpedited`.
+
+---
+
+## F10 — Three arms that are reachable, uncovered, and cannot be made to bite
+
+**Severity: n/a · No action · the shape a coverage number cannot distinguish**
+
+```
+app/src/main/java/org/libremediaconverter/convert/ConversionViewModel.kt:550, :553
+app/src/main/java/org/libremediaconverter/join/JoinViewModel.kt:349, :352, :278
+```
+
+F4 and F6 hold arms that cannot be *reached*. These can — and a test written against them would still
+pass under the mutation that ought to redden it, which is the harder case to spot and the more
+expensive one to discover halfway through writing the test.
+
+- **`observer?.cancel()`'s non-null arm** (`ConversionViewModel:550`, `JoinViewModel:349`). Reachable
+  by calling `convert()` twice. But `ScreenOwnership`'s token is what actually blocks the superseded
+  write — the ViewModel's own KDoc at `reset()` says the cancel is "a request honoured at the next
+  suspension point" and "the claim is what actually stops that write". Delete `observer?.cancel()`
+  and the suite stays green, correctly.
+- **`if (info == null) return@collect`** (`ConversionViewModel:553`, `JoinViewModel:352`). Reachable
+  through `pruneWork()`. But when the null arrives the state is already terminal, so removing the
+  guard crashes the collector and **leaves the state unchanged** — a state assertion is green under
+  the mutation. The only observable is an escaped coroutine exception, which the ViewModel's own KDoc
+  documents as unreliable on the JVM: kotlinx-coroutines-test's process-wide collector hands it to
+  whichever `runTest` starts next.
+- **`JoinViewModel:278`'s `Ambiguous` arm.** Looks like the twin of `ReattachGuardsTest`'s "a result
+  two jobs both claim", and is not. An `Ambiguous` requires a shared `outputPath`, so it can only be a
+  *finished* job — which maps to `Joined`, a state that reads nothing from `inputs`. **The Convert-side
+  twin does bite**, because `displayNameOf(tags)` reaches the file card; the asymmetry is the point.
+
+**Recorded because each of these was picked up as a candidate and put down again.** The wave-4 read
+lost time to all three before the mutation test was run in the head rather than the editor, which is
+the cheaper order.
+
+---
+
 ## Summary
 
 | ID | Finding | Severity | Evidence | Action |
@@ -271,12 +449,23 @@ no way to make it happen now.
 | F3 | `ConversionRequest.videoCodec` / `.audioCodec` have no callers | low | confirmed by inspection | delete, or keep for symmetry — **not** a test gap |
 | F4 | Two private guards reachable only by direct call | n/a | confirmed by inspection | **no action** — named exemption, per #88 |
 | F5 | `ConversionNotifications.areEnabled()` is never called | low | confirmed by inspection; grep returns the declaration only | **decide**: act on it or delete it — **not** a test gap |
+| F6 | Four more unreachable arms; `ConversionRouter:214-217`'s KDoc is false | low | confirmed by inspection; each traced to its upstream guard | **no action**, except the one-line KDoc fix |
+| F7 | `probeWithExtractor`'s catch is unreachable, as `probeForConcat`'s is | n/a | measured across four URI shapes (recorded in `CLAUDE.md`) | **no action** — device-only, now written down for both sites |
+| F8 | Three more dead members and six unused defaults | low | confirmed by inspection; grep per member | delete or keep knowingly — **not** a test gap |
+| F9 | Both `getForegroundInfo` overrides are dead: expedited work is never used | n/a | confirmed by inspection; `grep setExpedited` returns nothing | **no action** — sharpens #88's close |
+| F10 | Three reachable arms where no mutation bites | n/a | confirmed by inspection; each mutation traced to its masking guard | **no action** — recorded to stop the next read re-picking them |
 
 Order, if these are acted on: **F1 and F5 first, separately.** They are the two with a possible
 user-visible answer — a format the app can produce and does not offer, and a warning the app
-documents and does not give — and either answer changes what the tidying should look like. F2 and F3
-are tidying and belong in one commit with each other, not with F1 or F5. F4 is finished by being
-written down.
+documents and does not give — and either answer changes what the tidying should look like. F2, F3 and
+F8 are tidying and belong in one commit with each other, not with F1 or F5. F6's KDoc correction is a
+third kind: one line, no decision, and it should not wait on the tidying. F4, F7, F9 and F10 are
+finished by being written down.
+
+**Six of the ten are now "no action" or "not a test gap", and that is the useful shape.** By wave 4
+the report's remaining red is mostly this: arms nothing can reach, members nothing calls, and arms a
+test can reach but not pin. A coverage number cannot tell any of them from a real gap, which is why
+this document exists and why it grows faster than the percentage moves.
 
 **F1 and F5 share a shape worth naming:** both are places where a comment describes behaviour the
 code does not have, and in both the tempting fix (delete the dead arm, test the dead method) would
@@ -287,7 +476,15 @@ freeze the wrong answer in place. The decision comes first.
 **The test gaps from the same read.** Seven JVM-side gaps (**#132**) and three seam questions
 (**#133**) came out of this coverage read and are tracked there, because they are work rather than
 observations. This document holds only what a test would not fix. #133 also records why
-`AndroidDeviceCodecs.probe()` was considered and left out, so that spike is not run a third time.
+`AndroidDeviceCodecs.probe()` was considered and left out **through `ShadowMediaCodecList`**, so that
+spike is not run a third time.
+
+**Updated 2026-09-02:** #194 proposes reaching the same code through a *pure seam* instead, which is a
+different mechanism and one #133 did not evaluate — the builder objection it turns on (no
+`setIsAlias`, no `setCanonicalName`) does not apply to a function taking its own entry type. #133's
+close stands for the shadow; it is not a close on the seam. #194 also carries the reason the seam is
+worth cutting at all, which is not coverage: the `runCatching` fallback logs "assuming permissive" and
+returns empty sets, which makes `canEncode` and `canDecode` answer *no* for everything.
 
 **`ConversionForegroundType.current()`**, which looked like the sharpest gap in the read and is not.
 Its API 33 and 34 arms are cold on the JVM, but issue **#88** already established that the class is
@@ -321,6 +518,25 @@ the real ones — **34 of 383** and **20 of 143** missed — and the screens are
 better-covered files in the repo, which is what #52, #57 and #61 were for. **Do not chase the
 branch number here.** If a future read wants a screen metric, use lines.
 
+**Updated 2026-09-02: the same codegen inflates the *instruction* count, which wave 3's filter did
+not allow for.** Wave 3 selected candidates on `mi > 0` — at least one missed instruction — which was
+right to prefer over a bare branch count and is still wrong on these files. `JoinScreen.kt:222` reads
+`mi=10` and looks uncovered; it also reads `ci=38`, and `JoinStateAffordancesTest` already clicks that
+Save button and asserts `save:joined.mp4`. Every `onClick` lambda body flagged this way turned out to
+be covered at method level, the missed instructions being the recomposition-skip path again.
+
+Use `ci == 0` — the line never executed, which is JaCoCo's own missed-line definition — and pair it
+with a method-level `ci > 0 && mb > 0` pass for covered methods with cold arms. Neither filter alone
+is enough: `ConversionViewModel.cancel()` misses no line at all, yet its non-null arm had never been
+entered in 584 tests (#192). `CLAUDE.md`'s coverage entry carries the same correction.
+
+**Also codegen, also not gaps**, recorded once so they are not re-derived: the synthetic
+`NoWhenBranchMatchedException` closing an exhaustive `when` (`ConverterScreen:399`, `:686`,
+`JoinScreen:278`, `MainActivity:160`); the inner `is Idle -> Unit` arms at `ConverterScreen:253-254`
+and `JoinScreen:158-159`, which are structurally unreachable because the outer `when` already routed
+`Idle`; and the closing brace of a `launch` block whose `collect` never terminates
+(`ConversionViewModel:578`, `JoinViewModel:371`).
+
 **Anything requiring a device.** `MediaProbe`'s FFprobe half (`MediaProbe.kt:151, 156-158, 173-188`)
 and `FFmpegEngine` in full report 0% on the JVM and are covered by `androidTest`. JaCoCo measures
 `testDebugUnitTest` only; their zeroes are a boundary, as #84, #85, #86 and #88 each recorded