Nick Lurski
02a1573b78
Targeted application for Windows 10 and 8.1 to fix the incorrect OS version showing up in reports
2016-01-02 23:42:24 -04:00
Michael Möller
b8a66b9cb7
Added experimental support for the ITE IT8628E chip (issue #759 ).
2015-12-20 15:54:19 +01:00
Michael Möller
0e5e4afe5e
Corrected the source formatting.
2015-12-18 22:49:53 +01:00
ivanatpr
6cbfdce0bc
Prevent plot from reusing line colors if possible
...
CURRENTLY: the code that sets plot line colors loops determines a
default color for the all sensors, such that, AFAIK, a given sensor will
always get the same plot color across different runs of the application
(as long as the list of all detected sensors stays the same). This
consistency is nice, but there's no duplicate handling so if the user is
unlucky they can end up with duplicate colors in their plot even when
the plot only contains 2 sensors.
MY CHANGE: I added a second step that attempts to find a new color for
sensors in the plot whose color is being used by another sensor.
However, I tried to keep as much of the old consistency as I could, so
the default color for each sensor is still calculated in the same way as
before. That way if there aren't any duplicate colors, all sensors will
keep the same color they had before the change, so I'm guessing most
users won't even notice the change.
That said, in certain circumstances this change can cause plot colors to
jump around a bit as sensors get added/removed from the plot. For
Example, if sensors A & B have the same default color and you add both
to the plot, sensor B will get assigned a different color in order to
prevent a duplicate color. However if you then remove sensor A from the
plot, sensor B will suddenly revert to it's default color, which may
seem to the user like mysterious action at a distance. Should be rare
though.
2015-12-16 03:04:39 -05:00
Michael Möller
7b6fc115d8
Added a SensorName property to the SmartAttribute class in order to support sensor names that are different from the attribute name. Used the SensorName property to replace the "Temperature Difference From 100" sensor with a standard "Temperature" sensor. Closed issue #717 .
2015-12-13 18:11:48 +01:00
Michael Möller
f069e4c6e8
Updated the about box date.
2015-12-08 19:58:54 +01:00
Michael Möller
9afb24db9d
Added experimental support for the ITE IT8620E chip (using the same implementation as for the ITE IT8772E).
2015-12-08 19:54:21 +01:00
Michael Möller
5dfad04b31
Fixed issue #701 . Writing temporary 0 values to the sensor (NVIDIA GPU clocks) gets them recorded and leads to wrong sensor min values and wrong recorded/averaged values for plotting.
2015-12-06 19:42:58 +01:00
Michael Möller
1fa4a31ac0
Extracted the register and value port state and some methods from the LPCIO class into a new class LPCPort. Fixed issue #733 (unlocking the i/o space after sleep).
2015-12-04 16:32:48 +01:00
Michael Möller
135124427b
Fixed issue #747 introduced in commit 9e32a33. The IsNuvotonVendor check should be done after setting the vendor ID registers (and not before).
2015-12-01 19:05:00 +01:00
Michael Möller
e19faf5047
Added model 0x4E to the Skylake microarchitecture.
2015-11-22 14:21:50 +01:00
Kevin Van den Abeele
f3959b535e
Skylake support
...
Added initial support for skylake cpus:
- Clock speed, core temp and load should all be working
- Power usage does not seem to be correct at the moment
2015-11-22 12:47:09 +01:00
Michael Möller
dc33c420c4
Removed the default value for NUVOTON_VENDOR_ID registers.
2015-11-15 16:42:42 +01:00
Michael Möller
9e32a33cbf
Merged the Nuvoton NCT6102D/NCT6106D implementation back into the NCT677X class.
2015-11-15 16:35:40 +01:00
Deve
2c1fe299cc
Implement Nuvoton NCT6102D/NCT6106D chips.
2015-08-26 17:40:22 +02:00
Michael Möller
7614363308
Fixed an OverflowException when trying to use (unsupported) 64-bit thread affinity masks on 32-bit systems.
2014-12-30 22:49:32 +00:00
Michael Möller
f054320731
Fixed the following issue (present only on 32-bit systems):
...
Version: 0.7.0.0
System.NullReferenceException: Object reference not set to an instance of an object.
at OpenHardwareMonitor.GUI.MainForm.timer_Tick(Object sender, EventArgs e)
at System.Windows.Forms.Timer.OnTick(EventArgs e)
at System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Common Language Runtime: 4.0.30319.18444
Operating System: Microsoft Windows NT 6.1.7601 Service Pack 1
Process Type: 32-Bit
2014-12-30 22:47:39 +00:00
Michael Möller
bf8d491ef2
Fixed Issue 651.
2014-12-30 21:04:54 +00:00
Michael Möller
ebeb96c648
Changed the settings save code to use a two file based approach in order to reduce cases where settings are lost or reset (Fixed Issue 501).
2014-12-30 17:35:29 +00:00
Michael Möller
dc69a9431c
Added a new "Undefined" control mode. Changed the GPU fan control to restore to default (auto) settings when the Open Hardware Monitor closes (unless the control remained in "Undefined" mode).
2014-12-30 16:02:52 +00:00
Michael Möller
9eee90c076
Fixed Issue 645.
2014-12-28 22:42:36 +00:00
Michael Möller
e94d026298
Added support for Intel Atom N2xxx, D2xxx, C2xxx, E3xxx and Z3xxx CPUs (Fixed Issue 610, Issue 422 and Issue 647).
2014-12-28 17:54:26 +00:00
Michael Möller
ce61b81e50
Added support for Intel Core M-5xxx (14nm) Broadwell CPUs (Fixed Issue 646).
2014-12-28 15:34:37 +00:00
Michael Möller
fdc917d504
Added support for Intel Xeon E5-2600/1600 v3, Core i7-59xx CPUs (Fixed Issue 617). Corrected an error in the Intel CPU power calculation (wrong bit mask for "Energy Status Units: bits 12:8").
2014-09-16 20:35:33 +00:00
Michael Möller
bf0e26c554
Fixed an issue with the Nuvoton NCT6791D (hardware monitor i/o space lock wasn't disabled before attempting to read data).
2013-09-07 08:07:11 +00:00
Michael Möller
9f28081100
Added a configurable logging interval.
2013-08-25 19:13:35 +00:00
Michael Möller
94cbde3e97
Fixed a few stability issues in the logging implementation. Added support for logging sensors once the reappear.
2013-08-18 21:44:08 +00:00
Michael Möller
92d4954da6
Added a first data logging implementation.
2013-08-11 21:26:56 +00:00
Michael Möller
5117c1292d
Fixed an issue in the NCT677X class causing a crash when calling Update.
2013-08-04 06:54:46 +00:00
Michael Möller
fb67ee38dc
Changed the Intel core temperature reading to evaluate the "Reading Valid" bit 31 for package level sensors as well (undocumented).
2013-08-03 13:12:07 +00:00
Michael Möller
7513405fba
Added experimental support for Intel Ivy Bridge-E CPUs.
2013-08-01 11:57:09 +00:00
Michael Möller
816b2d99b0
Refactored the SuperIOHardware class.
2013-07-21 21:03:31 +00:00
Michael Möller
84d37eec67
Fixed an issue where the voltages, temperatures, fans and controls arrays could be null (instead of zero length) causing NullReferenceExceptions in SuperIOHardware.
2013-07-21 21:02:55 +00:00
Michael Möller
6527a4450d
Small correction for the Nuvoton NCT6791D super I/O chip.
2013-07-21 15:51:43 +00:00
Michael Möller
f89eb0e578
Added experimental support for the Nuvoton NCT6791D super I/O chip.
2013-07-21 14:17:11 +00:00
Michael Möller
b24637c47e
Updated the version.
2013-07-14 16:32:27 +00:00
Michael Möller
76c5b31e1a
Improved the code used to draw a line between the different OxyPlot subplots.
2013-07-14 14:04:44 +00:00
Michael Möller
6aea99bd27
Changed the name of RAM hardware to be always "Generic Memory" because the information from the SMBIOS table is not reliable.
2013-07-14 13:57:13 +00:00
Michael Möller
97e0a9c86f
Changed the HDD enumeration code to drop drives without smart support and without any non-zero-sized logical drives.
2013-06-30 16:24:52 +00:00
Michael Möller
67354b4125
Added support for the Fintek F71869A (F71868AD) super I/O chip.
2013-06-30 11:41:36 +00:00
Michael Möller
9868e12d7a
Added experimental support for AMD family 15h model 1Xh and family 16h CPUs.
2013-06-29 16:12:40 +00:00
Michael Möller
ac5a861c13
Added support for new Samsung SSDs (like Samsung SSD 840 PRO).
2013-06-25 20:34:29 +00:00
Michael Möller
9976edbfee
Added the NCT6771F and NCT6776F chips to the lm-sensors interface.
2013-06-23 19:10:28 +00:00
Michael Möller
57915384c8
Added code to handle exceptions when creating the report for drives that are no longer available/ready.
2013-06-09 20:11:20 +00:00
Michael Möller
4d5fa18490
Changed the HDD detection to list hard drives without SMART support as well (at least if they have any visible partitions on them).
2013-06-09 19:57:00 +00:00
Michael Möller
dcfa8ef3f9
Added additional exception handling to the http server.
2013-06-09 19:25:44 +00:00
Michael Möller
0bc6629e3a
Fixed an issue in the ram group implementation (sensor values did not get stored to the settings instance).
2013-06-09 17:50:45 +00:00
Michael Möller
81a926cfc9
Added Fahrenheit support to the plot.
2013-06-09 17:44:05 +00:00
Michael Möller
6260c63b71
Changed OxyPlot to draw a line between the different subplots.
2013-06-09 17:17:32 +00:00
Michael Möller
3ab2982c85
Small correction to the plot with multiple axes.
2013-06-09 16:53:16 +00:00
Nick Lurski