Michael Möller
9afb24db9d
Added experimental support for the ITE IT8620E chip (using the same implementation as for the ITE IT8772E).
2015-12-08 19:54:21 +01:00
Michael Möller
5dfad04b31
Fixed issue #701 . Writing temporary 0 values to the sensor (NVIDIA GPU clocks) gets them recorded and leads to wrong sensor min values and wrong recorded/averaged values for plotting.
2015-12-06 19:42:58 +01:00
Michael Möller
1fa4a31ac0
Extracted the register and value port state and some methods from the LPCIO class into a new class LPCPort. Fixed issue #733 (unlocking the i/o space after sleep).
2015-12-04 16:32:48 +01:00
Michael Möller
135124427b
Fixed issue #747 introduced in commit 9e32a33. The IsNuvotonVendor check should be done after setting the vendor ID registers (and not before).
2015-12-01 19:05:00 +01:00
Michael Möller
e19faf5047
Added model 0x4E to the Skylake microarchitecture.
2015-11-22 14:21:50 +01:00
Kevin Van den Abeele
f3959b535e
Skylake support
...
Added initial support for skylake cpus:
- Clock speed, core temp and load should all be working
- Power usage does not seem to be correct at the moment
2015-11-22 12:47:09 +01:00
Michael Möller
dc33c420c4
Removed the default value for NUVOTON_VENDOR_ID registers.
2015-11-15 16:42:42 +01:00
Michael Möller
9e32a33cbf
Merged the Nuvoton NCT6102D/NCT6106D implementation back into the NCT677X class.
2015-11-15 16:35:40 +01:00
Deve
2c1fe299cc
Implement Nuvoton NCT6102D/NCT6106D chips.
2015-08-26 17:40:22 +02:00
Michael Möller
7614363308
Fixed an OverflowException when trying to use (unsupported) 64-bit thread affinity masks on 32-bit systems.
2014-12-30 22:49:32 +00:00
Michael Möller
bf8d491ef2
Fixed Issue 651.
2014-12-30 21:04:54 +00:00
Michael Möller
dc69a9431c
Added a new "Undefined" control mode. Changed the GPU fan control to restore to default (auto) settings when the Open Hardware Monitor closes (unless the control remained in "Undefined" mode).
2014-12-30 16:02:52 +00:00
Michael Möller
9eee90c076
Fixed Issue 645.
2014-12-28 22:42:36 +00:00
Michael Möller
e94d026298
Added support for Intel Atom N2xxx, D2xxx, C2xxx, E3xxx and Z3xxx CPUs (Fixed Issue 610, Issue 422 and Issue 647).
2014-12-28 17:54:26 +00:00
Michael Möller
ce61b81e50
Added support for Intel Core M-5xxx (14nm) Broadwell CPUs (Fixed Issue 646).
2014-12-28 15:34:37 +00:00
Michael Möller
fdc917d504
Added support for Intel Xeon E5-2600/1600 v3, Core i7-59xx CPUs (Fixed Issue 617). Corrected an error in the Intel CPU power calculation (wrong bit mask for "Energy Status Units: bits 12:8").
2014-09-16 20:35:33 +00:00
Michael Möller
bf0e26c554
Fixed an issue with the Nuvoton NCT6791D (hardware monitor i/o space lock wasn't disabled before attempting to read data).
2013-09-07 08:07:11 +00:00
Michael Möller
5117c1292d
Fixed an issue in the NCT677X class causing a crash when calling Update.
2013-08-04 06:54:46 +00:00
Michael Möller
fb67ee38dc
Changed the Intel core temperature reading to evaluate the "Reading Valid" bit 31 for package level sensors as well (undocumented).
2013-08-03 13:12:07 +00:00
Michael Möller
7513405fba
Added experimental support for Intel Ivy Bridge-E CPUs.
2013-08-01 11:57:09 +00:00
Michael Möller
816b2d99b0
Refactored the SuperIOHardware class.
2013-07-21 21:03:31 +00:00
Michael Möller
84d37eec67
Fixed an issue where the voltages, temperatures, fans and controls arrays could be null (instead of zero length) causing NullReferenceExceptions in SuperIOHardware.
2013-07-21 21:02:55 +00:00
Michael Möller
6527a4450d
Small correction for the Nuvoton NCT6791D super I/O chip.
2013-07-21 15:51:43 +00:00
Michael Möller
f89eb0e578
Added experimental support for the Nuvoton NCT6791D super I/O chip.
2013-07-21 14:17:11 +00:00
Michael Möller
6aea99bd27
Changed the name of RAM hardware to be always "Generic Memory" because the information from the SMBIOS table is not reliable.
2013-07-14 13:57:13 +00:00
Michael Möller
97e0a9c86f
Changed the HDD enumeration code to drop drives without smart support and without any non-zero-sized logical drives.
2013-06-30 16:24:52 +00:00
Michael Möller
67354b4125
Added support for the Fintek F71869A (F71868AD) super I/O chip.
2013-06-30 11:41:36 +00:00
Michael Möller
9868e12d7a
Added experimental support for AMD family 15h model 1Xh and family 16h CPUs.
2013-06-29 16:12:40 +00:00
Michael Möller
ac5a861c13
Added support for new Samsung SSDs (like Samsung SSD 840 PRO).
2013-06-25 20:34:29 +00:00
Michael Möller
9976edbfee
Added the NCT6771F and NCT6776F chips to the lm-sensors interface.
2013-06-23 19:10:28 +00:00
Michael Möller
57915384c8
Added code to handle exceptions when creating the report for drives that are no longer available/ready.
2013-06-09 20:11:20 +00:00
Michael Möller
4d5fa18490
Changed the HDD detection to list hard drives without SMART support as well (at least if they have any visible partitions on them).
2013-06-09 19:57:00 +00:00
Michael Möller
0bc6629e3a
Fixed an issue in the ram group implementation (sensor values did not get stored to the settings instance).
2013-06-09 17:50:45 +00:00
Michael Möller
e72ae00be8
Added experimental support for Intel Haswell CPUs.
2013-06-09 16:10:43 +00:00
Michael Möller
eac9cc4d11
Changed the super I/O fan control: Fan controls are now always displayed, even if the value is null (as for example for ITE 87XX chips in automatic mode.
2012-11-04 13:10:53 +00:00
Michael Möller
1ccebc6850
Added additional Fintek chips to the lm-sensors interface.
2012-11-03 17:58:55 +00:00
Michael Möller
87641aebbd
Fixed Issue 382.
2012-10-28 11:34:53 +00:00
Michael Möller
322b079bf4
Reduced the amount of dynamic memory allocation when reading from the T-Balancer or creating tray icons.
2012-10-27 11:40:28 +00:00
Michael Möller
3692d7cc26
Enabled fan control on mainboards by default.
2012-10-21 14:45:24 +00:00
Michael Möller
41d24dc8d8
Added support for fan control on ITE 87XX chips and a mainboard specific configuration for the Gigabyte GA 970A UD3 (both based on a patch from Eric Hokanson).
2012-10-21 14:24:03 +00:00
Michael Möller
b6ad3fa3db
Changed a few types to internal (instead of public) in the Open Hardware Monitor library.
2012-10-01 17:10:09 +00:00
Michael Möller
c2f1a51725
Fixed Issue 387. The new implementation does not try to start a ring 0 driver that already exists, but could not be opened. It tries to delete the driver and install it new. The driver is now stored temporarily in the application folder. The driver is not correctly removed on system shutdown.
2012-09-23 18:37:43 +00:00
Michael Möller
5a8544454e
Added a few checks and delays to the driver loading code to increase the chance of loading the driver.
2012-08-11 21:48:54 +00:00
Michael Möller
e32ce0060d
Changed a few context menu items to display a radio option style. Added additional information from the SMBIOS to the report.
2012-08-11 21:32:59 +00:00
Michael Möller
e77e879780
Added a RAM sensor for used memory.
2012-07-26 06:51:19 +00:00
Michael Möller
992fa702dc
Fixed an error where loading config files from previous versions would crash the application.
2012-07-26 06:50:56 +00:00
Michael Möller
0d2c7e2c84
Added temperature offset parameters to all HDD temperature sensors. Fixed issue 271.
2012-07-25 16:03:36 +00:00
Michael Möller
a3f3febfb3
Added a new icon for RAM hardware.
2012-07-25 15:33:16 +00:00
Michael Möller
b702e42e3b
Changed the RAM implementation (removed Microsoft.VisualBasic dependency which is not implemented in Mono) and added code to prevent RAM hardware from loading on Linux.
2012-07-24 16:45:48 +00:00
Michael Möller
4bebb21f12
Added a RAM hardware and sensor, fixed Issue 115.
2012-07-23 21:54:35 +00:00
Michael Möller