tekert
c51381b2c2
Fix it8665e control fans ( #1109 )
...
* Move IT8665E Sensor to GetIteConfigurationsB
* Fix Fan controll settings
2023-08-20 11:36:33 +02:00
wlkmanist
f0309b626b
Add MS-7672 and MS-7757 boards ( #1111 )
...
Signed-off-by: wlkmanist <vlad.king5555@mail.ru >
Conflicts:
LibreHardwareMonitorLib/Hardware/Motherboard/Identification.cs
LibreHardwareMonitorLib/Hardware/Motherboard/Model.cs
2023-08-20 11:35:39 +02:00
Christopher Ng
ddfdee7f22
Add basic Asus ROG Crosshair X670E Hero support ( #1137 )
2023-08-10 13:44:05 +02:00
Armin Osaj
833d82c085
Added Gigabyte Z690 Aorus Ultra sensor names ( #1127 )
2023-07-29 19:30:44 +02:00
DrLippe
d0cf48c4d4
Add board support for ASUS Z790-I GAMING WIFI with EC ( #1124 )
...
* Add board support for ASUS Z790-I GAMING WIFI
* Add board support for ASUS Z790-I GAMING WIFI
* Add board support for ASUS Z790-I GAMING WIFI
2023-07-27 21:31:28 +02:00
PhyxionNL
05b1d108cd
Revert "Move IT8665E Sensor to GetIteConfigurationsB ( #1104 )" ( #1108 )
...
This reverts commit d3925f6d82 .
2023-06-29 15:26:27 +02:00
tekert
d3925f6d82
Move IT8665E Sensor to GetIteConfigurationsB ( #1104 )
2023-06-26 13:33:14 +02:00
PhyxionNL
7e841d70f1
Update EmbeddedController.cs
2023-06-16 16:40:25 +02:00
PhyxionNL
c0f2740ed3
Move mutexes out of Ring0
2023-06-14 11:58:26 +02:00
PhyxionNL
248304a309
Rename LPcPort.cs to LpcPort.cs
2023-06-13 15:28:59 +02:00
Maximilian Rehkopf and PhyxionNL
701e8ad514
Add support for IT87952E EC on Gigabyte boards ( #1091 )
...
* Rename IT8795E to IT87952E
IT8795E and IT87952E are distinct chips (with their own IC markings).
The IT8795E, as the IT8791E and IT8792E, reports chip ID 0x8733 whereas
the IT87952E identifies as 0x8695.
* Gigabyte EC: Fix typo in LPC register restore
When the AMD LPC Bridge registers are restored after configuring memory
mapping, restore the correct value for the "Memory Address for LPC
target cycles" register.
* Add IT87952E fan control for Gigabyte boards
IT87952E (ID 0x8695) has a third byte in SuperIO config space
(LDN 0x0F) that determines more bits of the host address for LPC memory
mapping.
Also the base address for Gigabyte boards is 0xFC000000 instead of
0xFF000000 (as is the case with IT8790/1/2/5).
This should make additional fan controls work on Gigabyte mainboards
where the settings had no effect previously, e.g: X570S AORUS MASTER
and X670E AORUS MASTER. (cf. Issue #251 )
It does not yet work for Intel boards as the LPC bridge requires
different programming.
* Update LpcIO.cs
---------
Co-authored-by: PhyxionNL <7643972+PhyxionNL@users.noreply.github.com >
2023-06-13 13:44:24 +02:00
wlkmanist and PhyxionNL
e9d091cc88
Add partially support for MS-7751 boards (F71889AD) ( #1082 )
...
* add partially support for MS-7751 boards (F71889AD)
Signed-off-by: wlkmanist <vlad.king5555@mail.ru >
* Update SuperIOHardware.cs
* Update Identification.cs
* Update Model.cs
* Update SuperIOHardware.cs
---------
Signed-off-by: wlkmanist <vlad.king5555@mail.ru >
Co-authored-by: PhyxionNL <7643972+PhyxionNL@users.noreply.github.com >
2023-06-13 10:44:44 +02:00
Chris
9930c5f0c1
Add support for ASUS ROG CROSSHAIR X670E GENE ( #1092 )
...
* Trying a different register for NCT6799D
* Making a note of what NCT6799D was before
* a
* Adding support for the ROG CROSSHAIR X670E GENE
2023-06-13 10:22:53 +02:00
Curi0
613697ab1f
Add support for Gigabyte B75M-D3H ( #1087 )
2023-06-02 15:06:32 +02:00
Luis Placid and ImLp
6066b1a797
Hotfix: Correct incorrect code on hash 0a65107 ( #1079 )
...
PR https://github.com/LibreHardwareMonitor/LibreHardwareMonitor/pull/1076 incorrectly introduced a build break due to wrong placement of parenthesis.
Contributor doesn't appear to have compiled the code.
Co-authored-by: ImLp <info@luisplacid.com >
2023-05-20 11:13:39 +02:00
Priyanshu Agrawal
0a6510790a
Add Names for Gigabyte B660M_DS3H_AX_DDR4 ( #1076 )
...
* Add Names for Gigabyte B660M_DS3H_AX_DDR4
* Updated naming, added parsing
2023-05-19 10:38:19 +02:00
PanicPaintbrush
d759d522a3
Add basic Asus Rog Crosshair X670E Extreme Support for Embedded controller ( #1070 )
2023-05-03 15:28:57 +02:00
BrashEndeavours
3404b78169
Add support for ASUS ROG Z390-E Gaming Motherboard ( #1069 )
2023-05-02 11:17:17 +02:00
Derek M and doolbneerg
ac4db9d4b9
Adding checks around the value cache in the IPMI update ( #1054 ) ( #1061 )
...
* Adding checks around the value cache in the IPMI update to prevent null dereference.
* Adding braces for code style.
---------
Co-authored-by: doolbneerg <doolbneerg@outlook.com >
2023-04-30 10:30:21 +02:00
PhyxionNL
0d796c6f44
Misc for #1054 ( #1055 )
2023-04-28 13:37:21 +02:00
AllyMcSqueal
81afa074bd
Added fan control support for the EVGA X58 3X SLI motherboard ( #1044 )
2023-04-18 22:05:57 +02:00
lavellse
32bcd93408
support asus rog strix z390-i gaming embedded controller ( #1046 )
2023-04-11 11:16:20 +02:00
javs
0196dca04a
Add support for Gigabyte B550 Aorus Pro sensors ( #1036 )
...
* Also change IT8792 to use voltage gain 0.011. This matches Gigabyte software, although the value may still be wrong.
2023-04-03 13:22:40 +02:00
wiruzman
b74731be49
Support Asus ROG STRIX Z390-F GAMING ( #1031 )
...
* Support Asus ROG STRIX Z390-F GAMING
* Add missing sensor
2023-03-26 11:54:25 +02:00
BenNeumeister
8892fa48ee
Update SuperIOHardware.cs ( #1026 )
...
Added support for controlling fans on 2nd ITE controller
2023-03-22 13:20:16 +01:00
PhyxionNL
e236d7c9a0
Add support for IPMI sensors and Supermicro IPMI fan control ( #1024 )
...
* Add support for IPMI sensors and Supermicro IPMI fan control
Closes #958 , thanks to @lukefor
2023-03-21 19:14:10 +01:00
PhyxionNL
cd77cec0b5
Unify CPU namespace with folder ( #1023 )
2023-03-21 18:11:40 +01:00
javs
297c3485d6
Add support for Gigabyte's custom fan controller ( #1020 )
2023-03-21 17:55:15 +01:00
WinFinn
7ca9a8e34e
Added ROG Maximus X Hero (Wifi AC) - Super IO sensors ( #994 )
...
* Added ROG Maximus X Hero (Wifi AC) - Super IO sensors
* Update SuperIOHardware.cs
* Update SuperIOHardware.cs
2023-03-08 22:25:23 +01:00
Rem0o
4b166d2140
Update SuperIOHardware.cs ( #999 )
...
The embedded switch on the model has no default and would break out of the manufacturer switch if the model wasn't Z790_Taichi.
2023-03-08 22:20:24 +01:00
PapaPig
af0f4b696b
Add support for ASRock Z790 Taichi/Z790 Taichi Carrara. ( #962 )
...
* Add support for ASRock Z790 Taichi/Z790 Taichi Carrara.
2023-02-25 08:35:59 +01:00
masaki takagi
14a070b94a
Add Support IT8625E and X670E Valkyrie ( #982 )
2023-02-23 13:20:22 +01:00
Vladislav Sharapov
fbb7157d27
Fix ASUS X470-I incontrollable fans ( #978 )
...
I had correct fan readings for the fan on the MB, but could not control them. Found in the code there is an offset of 2; the comment states that the first 2 fans always show zero. I removed the offset - now I have 5 fan controls (which is not correct, since the MB only has 3 fan headers), but the first 2 actually control the fans.
I assume that the offset is either outdated and no longer needed, or it should offset 2 fans from the end of the array, not the start of it. I don't have all the headers populated, so cannot fully test whether the offset from the end is fine.
I built the LHM library and added it to both LHM and FanCtrl v1.5.6, in both cases I could control the fans.
2023-02-20 13:23:14 +01:00
WinFinn
50f2d6073c
Added ASUS ROG Maximus Z690 Hero - SuperIO sensors ( #974 )
2023-02-15 10:53:20 +01:00
Alan
f65a49f5be
Add support for ASUS Maximum Z690 Formula ( #955 )
2023-01-26 10:52:31 +01:00
mr-stocki
1131b4098d
Asus PRIME Z690-A T_Sensor and Temp VRM ( #927 )
2022-12-10 19:29:26 +01:00
PhyxionNL
42253a303c
Fixes #911
2022-11-25 18:59:54 +01:00
PhyxionNL
1cc688388d
Added preliminary support for Nuvoton NCT6686D chip #2 ( #897 )
2022-11-18 17:27:26 +01:00
Dirk-Jan Meijer
54f4426b2b
Added support for Asus Z790 Max Hero ( #894 )
2022-11-16 19:44:30 +01:00
Alexander Vostres
f9cfde5f91
Add preliminary support for Nuvoton NCT6799D ( #846 )
2022-11-10 13:41:21 +01:00
sp991
53b0305512
Fixing-ITE-IT8628E to show up to 6 fans instead of 4 ( #850 )
...
* Update IT87XX.cs
* Update IT87XX.cs
* Update IT87XX.cs
2022-10-23 10:34:10 +02:00
PhyxionNL
58cef111a1
Use file-scoped namespaces ( #842 )
2022-10-09 13:22:57 +02:00
PhyxionNL
3ac329f247
Fix some code analysis issues ( #841 )
2022-10-09 13:16:31 +02:00
Sergey Vergun
e38ce5c899
Fix Gigabyte Z690 AORUS PRO sensor names. Add EC_Temp sensors. Add voltages. ( #817 )
...
* Add voltages
* Fix Gig Z690 PRO sensor names. Add EC_Temp probes
2022-09-15 11:10:28 +02:00
PhyxionNL
82e9039925
Update SuperIOHardware.cs
2022-07-13 16:26:45 +02:00
Igor Tkachev
67d82e0784
ROG Zenith II Extreme support ( #777 )
2022-07-13 16:23:40 +02:00
PhyxionNL
38b97e10d0
Update editorconfig + changes ( #771 )
2022-06-29 19:38:57 +02:00
Scott Charron
84908dbf2f
added specific support for X570-i in superio and added vrm/chipset temperature sensor in Asus EC. ( #767 )
2022-06-28 10:15:23 +02:00
Ken Svensson
42182d72f7
Add support for ROG MAXIMUS Z690 EXTREME GLACIAL ( #752 )
2022-06-03 14:34:38 +02:00
Kevin De Magalhaes
d83ad4190d
Update EmbeddedController.cs ( #740 )
...
Correction of the motherboard model (CROSSHAIR III FORMULA > ROG CROSSHAIR VIII FORMULA). It has the same sensors so I put it with the CROSSHAIR VIII HERO
2022-05-11 18:02:23 +02:00