* Support for 10 new MSI motherboards with NCT6687D-R SIO controller
* Support for newly established fan and control register structure
WILL ABSOLUTELY BREAK FAN CONTROL CONFIGS FOR NCT6687DR USERS. This introduces Support for 16 System Fans and Controls, including EZ-Connect, Pump Fan 2, and System Fan 7. Also improved the logic for nct6687dr control.
* Try and migrate the old GigabyteController stuff with PawnIO
* Bring back WinRing0 era GigabyteController stuff
* ISABridge use the PawnIO module with its built-in logic
* Ecio uses LpcIO directly (not sure about the initialization logic in TryCreate() to make this work)
* Code-review
* Fix inverted logic
* Remove IsaBridgeEc field init
* Format document
* Combine logic
* Gigabyte Implementation best attempt
* Update IsaBridgeGigabyteController.cs
* Cleanup and fix enablind logic for Isa version
* Add debug logs
* Update IsaBridgeGigabyteController.cs
* Code review
* Unmap + restore the mmio state is done through the closing of the module.
* Fix boolean logic
* Restore the fan control byte instead
* Fallback to ECIO if FanControl enable byte is 0xFF
+ add logs to ECIO
* Port back to validation logic
* Allow for one or the other MMIO to be 0
* Wrap enter/exit mmio logic + enter/exit each time
* Keep state of EcioPort enable
* Missing dispose + close order fix
* Update IsaBridgeGigabyteController.cs
* Remove empty line before TryCreate method
* Code review
* Remove try/finally for SW
* Cleanup debug log methods
* Add DEBUG_LOG define conditional
* Misc
* Misc
---------
Co-authored-by: PhyxionNL <7643972+PhyxionNL@users.noreply.github.com>
* Begin CrOS implementation for Framework Laptops
* CrOS: Talk directly to the EC, instead of through ACPI
* Add a few Framework models
* Remove early Framework models
These have a different EC, and don't currently work
* Migrate CrOS ECs to PawnIO
* Implement EcCommand and read sensor names
* Add more Framework models
* Add some error handling
* Misc
---------
Co-authored-by: PhyxionNL <7643972+PhyxionNL@users.noreply.github.com>
* Make the Debug,WriteLine opt in with a symbol define
Having all these Debug,WriteLine made the update method painfully slow and the running process laggy during a debug session.
* Update Nct677X.cs
* Update Nct677X.cs
* Update Nct677X.cs
---------
Co-authored-by: PhyxionNL <7643972+PhyxionNL@users.noreply.github.com>
* Add support for MSI MEG Z790 GODLIKE MAX.
* Update LibreHardwareMonitorLib/Hardware/Motherboard/SuperIOHardware.cs
* Rename M2_1 to M2 #1 in temperature readings
---------
Co-authored-by: PhyxionNL <7643972+PhyxionNL@users.noreply.github.com>
* Replace Storage implementation with CrystalDiskInfo based implementation.
* Formatting.
* Code review.
* Code review.
* Increase space for attribute name in report.
* Implement dynamic disk handling for usage sensor.
Disable unused warnings.
* Further cleanup in NativeMethods.txt and referenced.
* Add ASRock X870E Nova WiFi Support
- Added support for Nuvoton NCT5585D chip
- Added support for Nuvoton NCT6796D-S chip
- Added motherboard-specific switch to select the correct chip due to duplicate chip ID/Revision (see #2005)
- Added chips to disable monitor i/o space lock block
- Added business logic to include chips in _superIOs.Add for the Nct677X() logic.
- Added chips to business logic to properly assign indices for fans, controls, temperatures and voltages.
- Added TSENSOR to the enum for SourceNct67Xxd to display the 3rd thermistor sensor.
- Added Naming and Identification for the X870E Nova WiFi
- Supressed warnings and added documentation
* Corrections
These changes reflect scraping the datasheet for the correct registers, half-registers, halfBits, sourceRegisters and alternateRegisters
- Replaced TSENSOR with AUXTIN5 as it is named in the datasheet
- Corrected Register values
- Reworked indexes and temperature naming
* Requested Changes
- Linked to PR instead of Datasheet which may change.
- Changed descriptions to be more understandable rather than using Datasheet labels
* Removed duplicate TSENSOR in enum
* Add Info for Gigabyte GA-MA790X-DS4 and some Typo corrections
* Fix casing of 'VBAT' to 'VBat' in SuperIOHardware
---------
Co-authored-by: PhyxionNL <7643972+PhyxionNL@users.noreply.github.com>
added identifier string to Identification.cs
added new model enum entry B850S_PRO_WIFI6E
added B850S_PRO_WIFI6E to the list of models that get the NCT6687DR instead of NCT6687D
Co-authored-by: Stephan Koster <skoster@enclustra.com>
* Support ASUS ROG Crosshair X870E Apex
* Remove unnecessary HashSet
* Adjust Temperature Sensor Mapping
Both Temp #1 and Temp #22 move with CPU load, but it looks like Temp #22 is actually CPU which is the same as the Hero. #1 doesn't align mostly with VRM but isn't an exact match.
* Refactor temperature sensor mapping
Replaces the temperature sensor dictionary mapping with explicit additions for known sensors and a loop to add unmapped sensors.
* Add Support for MSI B840P PRO WIFI
* Rectify loop mathematical operator syntax
* Add support for two additional motherboards
Z890 Gaming Plus Wifi and Pro Z890-S Wifi Project Zero
* Add support for Asrock B450M Pro4 R2.0
* fixed indexes
Voltages are taken from the R1.0 board, since they all match up even tho some of them aren't shown in any other place (bios or other hw monitoring softwares), but I assume they are correct. Temperatures differ from the R1.0 ones, with only the motherboard one being correct while the other temperatures don't increase by much, or at all, even udner heavy load.
