A1 (#167): pin all three foreground-service regimes, and the boundary between two of them

`ConversionForegroundType.current()` has three arms and the JVM suite executed one.
`robolectric.properties` pins everything to `sdk=36`, and `@Config` appears nowhere in
`app/src/test`, so 3 lines and 3 of 4 branches were cold.

The instrumented test is not a substitute, and the reason is specific rather than
general. `ConversionWorkerTest.foregroundTypeMatchesTheRunningApiLevel` asserts against
whichever API the leg is, so it covers one arm per leg and never the other two -- and the
legs that would cover 33 and 34 are the ones #122 wedges. From
docs/coverage-read-findings.md, an API 33 run reported `received: 60` with
`failed: unknown`: the regime was exercised and that leg could not have said so if it had
broken. This runs all three deterministically in the same ./gradlew invocation.

Four classes, not three. 35 shares its answer with 36 and looks redundant; it is the
whole point. Relaxing `>= VANILLA_ICE_CREAM` to `>` is invisible at every level except
exactly 35 -- measured, not assumed: that mutation failed ForegroundTypeApi35Test alone,
while swapping DATA_SYNC and MEDIA_PROCESSING failed 34, 35 and 36. Without the 35 class
the first mutation survives the suite.

546 -> 550 JVM tests, 0 failures. No production code changed.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

CLAUDE.md

@@ -130,9 +130,9 @@ install for code that can never run — and on API 37 the full APK does not fit
 - The `model` package is excluded from `ReturnCount` and `CyclomaticComplexMethod` only. It is the
   decision layer, where one branch is one documented user-visible outcome and the metric counts
   answers rather than complexity. Every other rule still applies there.
-- **Coverage is reported, not gated** — **87.1% of lines (2025/2324), 69.1% of branches
-  (974/1410)**, measured 2026-08-27 with `./gradlew :app:jacocoTestReport`, against 502 JVM tests
-  in 71 classes.
+- **Coverage is reported, not gated** — **88.9% of lines (2087/2348), 75.4% of branches
+  (1011/1340)**, measured 2026-08-29 with `./gradlew :app:jacocoTestReport`, against 546 JVM tests
+  in 76 classes.
 
   **Every figure this file carried before 2026-08-24 was an artifact, roughly half the real one.**
   Robolectric loads classes through its own sandbox classloader with no source location, JaCoCo
@@ -159,6 +159,21 @@ install for code that can never run — and on API 37 the full APK does not fit
   chooses a branch the suite had never taken. Line coverage barely notices; branch coverage is the
   whole point.
 
+  Then #153's five children on 2026-08-29 — 87.1% -> 88.9% line, 69.1% -> **75.4%** branch, 502 ->
+  546 tests.
+
+  **That last branch figure moved for two reasons, and only one of them is new tests.** The
+  numerator rose 974 -> 1011; the denominator *fell* 1410 -> 1340. Both are the seam work. Pulling
+  a `when` out of a lambda inside a `collect` deletes the coroutine state machine's synthesized
+  branches around it, and what is left is a plain function whose branches a test can choose:
+  `ConversionViewModel$observe$1$1` went from carrying the whole mapping to 6 branches, while the
+  extracted `ConversionViewModelKt` covers 41 of 42 and `JoinViewModelKt` 38 of 39. So a seam is
+  worth more than the tests it enables — it also stops the measurement counting scaffolding.
+
+  Be careful quoting a branch move on its own for that reason. A percentage that rises because the
+  denominator shrank is not the same claim as one that rises because more branches are tested, and
+  this entry has a history of explaining its own numbers wrongly.
+
   And **re-measure before quoting**: this entry was once written quoting 81.4%, measured four hours
   earlier, and was already three points stale by the time it was ready to merge.
 - **Testable code is not done until it is tested.** If a piece is unit testable, it gets unit
@@ -182,6 +197,32 @@ install for code that can never run — and on API 37 the full APK does not fit
 
 - `kotlin.code.style=official`. Gradle stays Kotlin DSL.
 
+- **A stacked PR does not merge with `gh pr merge`, and `MERGED` is not proof it reached `main`.**
+  Two separate traps, both measured on 2026-08-27 while landing #144-#151.
+
+  `gh pr merge` uses the GraphQL mutation, which refuses a stacked PR outright: *"This pull request
+  is part of a stack and must be merged using the asynchronous merge REST API."* So does
+  `PUT .../pulls/{n}/merge`. The one that works is
+  `gh api -X PUT repos/OWNER/REPO/pulls/N/merge-async -f merge_method=merge`, which returns a uuid
+  to poll at `.../merge-async/{uuid}` until `status` is `merged` or `failed`.
+
+  **The second trap is worse, because nothing looks wrong.** GitHub retargets a stacked PR's base
+  to `main` when the PR below it merges, but *asynchronously*. Merge a stack faster than that
+  settles — five PRs about thirty seconds apart, in the case that found this — and each one merges
+  into its own base branch, which has itself already been merged and left behind. Every call
+  returns `status: merged` and every one is true. `gh pr list --state open` comes back empty, every
+  PR shows `MERGED`, and **none of the content is on `main`**.
+
+  What caught it was a coverage re-measure reading two points lower than the same tree had measured
+  an hour earlier; a fresh `git pull` changed nothing, which is what turned it into a question.
+  `git merge-base --is-ancestor <merge-sha> origin/main` answers it in one line. Do that after
+  merging a stack, or merge one at a time and re-read `baseRefName` between. #160 is what the
+  recovery cost.
+
+  The auto-retarget belongs to the stacking feature specifically. A PR opened with a plain
+  `gh pr create --base some-branch` does **not** retarget when that branch merges — it is left
+  pointing at a dead base and has to be moved by hand.
+
 - **File one-off issues with `tools/github/file-issue.sh`, not `gh issue create`.** `gh issue
   create` does not touch the project board, so the issue exists, carries its labels, and is
   invisible in the Kanban — indistinguishable from never having been filed. Measured 2026-08-24:

app/src/main/java/org/libremediaconverter/convert/ConverterScreen.kt

@@ -94,24 +94,61 @@ fun ConverterScreen(modifier: Modifier = Modifier, viewModel: ConversionViewMode
         state = state,
         settings = settings,
         validation = validation,
-        actions = ConverterActions(
+        actions = converterActions(
+            viewModel = viewModel,
             onPickInput = { pickInput.launch(arrayOf("*/*")) },
-            onPreset = viewModel::setPreset,
-            onContainer = viewModel::setContainer,
-            onVideoCodec = viewModel::setVideoCodec,
-            onAudioCodec = viewModel::setAudioCodec,
-            onSuggestion = viewModel::applySuggestion,
-            onQuality = viewModel::setQuality,
-            onEnginePreference = viewModel::setEnginePreference,
             onConvert = { requestNotifications.launch(Manifest.permission.POST_NOTIFICATIONS) },
-            onCancel = viewModel::cancel,
             onSave = { suggestedName -> chooseDestination.launch(suggestedName) },
-            onReset = viewModel::reset,
         ),
         modifier = modifier,
     )
 }
 
+/**
+ * Which of the ViewModel's methods each affordance on the screen calls.
+ *
+ * ## Why this is a function rather than an argument list
+ *
+ * It was an argument list, inside [ConverterScreen], which no test reached: `ConverterScreenContent`
+ * builds its own [ConverterActions], so every test in the suite drove the stateless inner and none
+ * of them ever saw the wiring.
+ *
+ * Most of the list is safe without a test, and saying so is more useful than pretending otherwise:
+ * `onContainer`, `onVideoCodec`, `onAudioCodec`, `onPreset`, `onSuggestion`, `onQuality` and
+ * `onEnginePreference` each take a distinct type, so binding one to another's setter does not
+ * compile. Verified rather than assumed — swapping `onVideoCodec` and `onAudioCodec` fails with
+ * *"Inapplicable candidate(s): fun setAudioCodec(codec: AudioCodec)"*.
+ *
+ * **[ConverterActions.onCancel] and [ConverterActions.onReset] are the exception.** Both are
+ * `() -> Unit`, so swapping them compiles silently — also verified — and ships a Cancel button that
+ * throws the conversion away and a Start-over button that leaves it on screen. That pair is what
+ * `ConverterWiringTest` exists for.
+ *
+ * The three launcher-backed actions stay parameters: they need an `ActivityResultLauncher`, which
+ * is the part that genuinely needs the composition, and keeping them out means the rest can be
+ * checked without one.
+ */
+@UnstableApi
+internal fun converterActions(
+    viewModel: ConversionViewModel,
+    onPickInput: () -> Unit,
+    onConvert: () -> Unit,
+    onSave: (suggestedName: String) -> Unit,
+): ConverterActions = ConverterActions(
+    onPickInput = onPickInput,
+    onPreset = viewModel::setPreset,
+    onContainer = viewModel::setContainer,
+    onVideoCodec = viewModel::setVideoCodec,
+    onAudioCodec = viewModel::setAudioCodec,
+    onSuggestion = viewModel::applySuggestion,
+    onQuality = viewModel::setQuality,
+    onEnginePreference = viewModel::setEnginePreference,
+    onConvert = onConvert,
+    onCancel = viewModel::cancel,
+    onSave = onSave,
+    onReset = viewModel::reset,
+)
+
 /**
  * Everything [ConverterScreenContent] can ask for, in one value.
  *

app/src/main/java/org/libremediaconverter/join/JoinScreen.kt

@@ -56,17 +56,38 @@ fun JoinScreen(modifier: Modifier = Modifier, viewModel: JoinViewModel = viewMod
 
     JoinScreenContent(
         state = state,
-        actions = JoinActions(
+        actions = joinActions(
+            viewModel = viewModel,
             onPickInputs = { pickInputs.launch(arrayOf("video/*")) },
-            onJoin = viewModel::join,
-            onCancel = viewModel::cancel,
             onSave = { suggestedName -> chooseDestination.launch(suggestedName) },
-            onReset = viewModel::reset,
         ),
         modifier = modifier,
     )
 }
 
+/**
+ * Which of the ViewModel's methods each affordance on the join screen calls.
+ *
+ * The join-side twin of `converterActions`, and the transposition risk here is worse: **three**
+ * `() -> Unit` bindings rather than two. `onJoin`, `onCancel` and `onReset` are mutually
+ * interchangeable as far as the compiler is concerned, so a Join button that cancels, or a Cancel
+ * button that starts the job, is a swap nothing but a test would catch.
+ *
+ * See `converterActions` for why the launcher-backed actions stay parameters.
+ */
+@UnstableApi
+internal fun joinActions(
+    viewModel: JoinViewModel,
+    onPickInputs: () -> Unit,
+    onSave: (suggestedName: String) -> Unit,
+): JoinActions = JoinActions(
+    onPickInputs = onPickInputs,
+    onJoin = viewModel::join,
+    onCancel = viewModel::cancel,
+    onSave = onSave,
+    onReset = viewModel::reset,
+)
+
 /**
  * Everything [JoinScreenContent] can ask for, in one value.
  *

app/src/main/java/org/libremediaconverter/join/JoinViewModel.kt

@@ -5,6 +5,7 @@ import android.net.Uri
 import androidx.lifecycle.AndroidViewModel
 import androidx.lifecycle.viewModelScope
 import androidx.media3.common.util.UnstableApi
+import androidx.work.Data
 import androidx.work.WorkInfo
 import androidx.work.WorkManager
 import kotlinx.coroutines.CoroutineDispatcher
@@ -30,6 +31,108 @@ import org.libremediaconverter.work.jobSnapshots
 import java.io.File
 import java.util.UUID
 
+/**
+ * One update about a running join, as WorkManager last reported it.
+ *
+ * The join-side twin of `ConversionUpdate`, and deliberately the same shape: this pair of seams is
+ * one refactor done twice, and letting them diverge would make the two flows harder to compare than
+ * the duplication costs. There is no `progressPercent` here because `ConcatWorker` publishes none —
+ * a join is indeterminate.
+ */
+internal data class JoinUpdate(val state: WorkInfo.State, val runAttemptCount: Int, val outputData: Data)
+
+/**
+ * What the join screen should show, given what WorkManager last said about the job.
+ *
+ * The join-side twin of `conversionStateFrom`, extracted for the same reason and with the same two
+ * exclusions: the ownership check stays at the call site, and this takes no responsibility for the
+ * staged file. See that function's KDoc for the argument in full.
+ *
+ * Five arms had never been chosen by any test before this was cut out, because a real `ConcatWorker`
+ * only ever produces a terminal state with well-formed output.
+ *
+ * @param cancelled where a cancellation lands, which differs for a reattached job — see [observe].
+ */
+@UnstableApi
+internal fun joinStateFrom(update: JoinUpdate, inputs: List<InputFile>, cancelled: JoinState): JoinState =
+    when (update.state) {
+        // BLOCKED is a job waiting on a prerequisite, which the user has nothing to do about and
+        // nothing useful to be told about. It reads as "starting", like a fresh ENQUEUED.
+        WorkInfo.State.RUNNING, WorkInfo.State.BLOCKED -> JoinState.Joining(inputs)
+
+        // ENQUEUED after a run means a retry is pending -- the same rule, and the same reasoning, as
+        // the convert side. See `conversionStateFrom`.
+        WorkInfo.State.ENQUEUED ->
+            if (update.runAttemptCount > 0) {
+                JoinState.Waiting(inputs)
+            } else {
+                JoinState.Joining(inputs)
+            }
+
+        WorkInfo.State.SUCCEEDED -> joinedFrom(update.outputData)
+
+        // A worker that dies before it can report anything leaves no output data at all, and an
+        // exception's message can be an empty string. Both would read as a failure with nothing said,
+        // so blank falls back like missing does.
+        WorkInfo.State.FAILED -> JoinState.Failed(
+            update.outputData.getString(ConcatWorker.KEY_ERROR)
+                ?.takeIf { it.isNotBlank() }
+                ?: ConcatWorker.GENERIC_FAILURE_MESSAGE,
+        )
+
+        WorkInfo.State.CANCELLED -> cancelled
+    }
+
+/**
+ * The `SUCCEEDED` arm. A join that reported success and named no file has nothing to offer.
+ */
+@UnstableApi
+private fun joinedFrom(outputData: Data): JoinState {
+    val path = outputData.getString(ConcatWorker.KEY_OUTPUT_PATH)
+        ?: return JoinState.Failed(JOINED_WITHOUT_A_FILE_MESSAGE)
+    return JoinState.Joined(
+        staged = File(path),
+        strategy = strategyFrom(outputData.getString(ConcatWorker.KEY_STRATEGY)),
+        // A join enqueued before the worker reported these carries neither, and the fallback is
+        // the format such a job really used -- ConcatWorker.request has always defaulted to it,
+        // and the join screen has never offered a choice.
+        suggestedName = outputData.getString(ConcatWorker.KEY_SUGGESTED_NAME)
+            ?.takeIf { it.isNotBlank() }
+            ?: ConcatWorker.outputNameFor(ConcatWorker.DEFAULT_FORMAT),
+        mimeType = outputData.getString(ConcatWorker.KEY_MIME_TYPE)
+            ?.takeIf { it.isNotBlank() }
+            ?: ConcatWorker.DEFAULT_FORMAT.mimeType,
+    )
+}
+
+/**
+ * The strategy a finished join reported, or [ConcatStrategy.REENCODE] when it named none.
+ *
+ * **Looked up rather than `valueOf`, and that is a fix rather than a style choice.** `valueOf`
+ * throws `IllegalArgumentException` on a name this build does not define, and this runs inside a
+ * `viewModelScope` collect with no handler -- so the throw does not become a `Failed` state, it
+ * takes the process down.
+ *
+ * Reachable for the reason `WorkerEnumFallbackTest` and `JobTags` are both written on: WorkManager
+ * keeps finished work for about a week, so a downgrade or a rollback hands this build a job
+ * enqueued by another one. `ConcatWorker` writes `result.strategy.name` into the output `Data`, so
+ * a build that added a third strategy would leave this one crashing on its own completed joins.
+ *
+ * `ConcatWorker.kt` already made exactly this change for `KEY_FORMAT`, and says why in as many
+ * words: *"Looked up rather than `valueOf` … a format name this build does not define used to throw
+ * past the catch."* The same read on this side had not been changed with it.
+ *
+ * REENCODE is the safe default rather than an arbitrary one: it is the answer for inputs that do
+ * not match, so a job whose strategy cannot be read is described as the more conservative of the
+ * two rather than being claimed as a lossless stream copy.
+ */
+private fun strategyFrom(name: String?): ConcatStrategy =
+    ConcatStrategy.entries.firstOrNull { it.name == name } ?: ConcatStrategy.REENCODE
+
+/** A join that reported success and named no file. There is nothing to offer the user to save. */
+internal const val JOINED_WITHOUT_A_FILE_MESSAGE: String =
+    "Joining reported success but produced no file."
+
 sealed interface JoinState {
     data object Idle : JoinState
     data class Ready(val inputs: List<InputFile>) : JoinState
@@ -251,56 +354,19 @@ class JoinViewModel @JvmOverloads constructor(
                 // takes ownership of the staged file, and a superseded observation must not do
                 // that either.
                 if (!ownership.stillHeldBy(token)) return@collect
-                _state.value = when (info.state) {
-                    WorkInfo.State.RUNNING, WorkInfo.State.BLOCKED -> JoinState.Joining(inputs)
-                    WorkInfo.State.ENQUEUED ->
-                        if (info.runAttemptCount > 0) {
-                            JoinState.Waiting(inputs)
-                        } else {
-                            JoinState.Joining(inputs)
-                        }
-
-                    WorkInfo.State.SUCCEEDED -> {
-                        val path = info.outputData.getString(ConcatWorker.KEY_OUTPUT_PATH)
-                        val strategy = info.outputData.getString(ConcatWorker.KEY_STRATEGY)
-                            ?.let(ConcatStrategy::valueOf) ?: ConcatStrategy.REENCODE
-                        if (path == null) {
-                            JoinState.Failed("Joining reported success but produced no file.")
-                        } else {
-                            val staged = File(path)
-                            // Take responsibility for the file at the same moment the state
-                            // starts referring to it, so the two cannot disagree.
-                            pendingStaged = staged
-                            JoinState.Joined(
-                                staged = staged,
-                                strategy = strategy,
-                                // A join enqueued before the worker reported these carries
-                                // neither, and the fallback is the format such a job really
-                                // used -- ConcatWorker.request has always defaulted to it, and
-                                // the join screen has never offered a choice.
-                                suggestedName = info.outputData
-                                    .getString(ConcatWorker.KEY_SUGGESTED_NAME)
-                                    ?.takeIf { it.isNotBlank() }
-                                    ?: ConcatWorker.outputNameFor(ConcatWorker.DEFAULT_FORMAT),
-                                mimeType = info.outputData
-                                    .getString(ConcatWorker.KEY_MIME_TYPE)
-                                    ?.takeIf { it.isNotBlank() }
-                                    ?: ConcatWorker.DEFAULT_FORMAT.mimeType,
-                            )
-                        }
-                    }
-
-                    // A worker that dies before it can report anything leaves no output data at
-                    // all, and an exception's message can be an empty string. Both would read as
-                    // a failure with nothing said, so blank falls back like missing does.
-                    WorkInfo.State.FAILED -> JoinState.Failed(
-                        info.outputData.getString(ConcatWorker.KEY_ERROR)
-                            ?.takeIf { it.isNotBlank() }
-                            ?: ConcatWorker.GENERIC_FAILURE_MESSAGE,
-                    )
-
-                    WorkInfo.State.CANCELLED -> cancelled
-                }
+                val next = joinStateFrom(
+                    JoinUpdate(
+                        state = info.state,
+                        runAttemptCount = info.runAttemptCount,
+                        outputData = info.outputData,
+                    ),
+                    inputs = inputs,
+                    cancelled = cancelled,
+                )
+                // Read off the result rather than assigned inside the mapping -- see the same
+                // three lines in ConversionViewModel for why that is the better half of the swap.
+                if (next is JoinState.Joined) pendingStaged = next.staged
+                _state.value = next
             }
         }
     }

app/src/test/java/org/libremediaconverter/convert/ScreenWiringTest.kt

@@ -0,0 +1,241 @@
+package org.libremediaconverter.convert
+
+import android.app.Application
+import android.net.Uri
+import androidx.media3.common.util.UnstableApi
+import androidx.work.Data
+import androidx.work.workDataOf
+import org.junit.After
+import org.junit.Assert.assertEquals
+import org.junit.Assert.assertNotEquals
+import org.junit.Assert.assertTrue
+import org.junit.Before
+import org.junit.Test
+import org.junit.runner.RunWith
+import org.libremediaconverter.join.JoinState
+import org.libremediaconverter.join.JoinViewModel
+import org.libremediaconverter.join.joinActions
+import org.libremediaconverter.model.AudioCodec
+import org.libremediaconverter.model.Container
+import org.libremediaconverter.model.EnginePreference
+import org.libremediaconverter.model.OutputFormat
+import org.libremediaconverter.model.QualityTier
+import org.libremediaconverter.model.VideoCodec
+import org.libremediaconverter.work.ConcatWorker
+import org.robolectric.RobolectricTestRunner
+import org.robolectric.RuntimeEnvironment
+
+/**
+ * That each affordance is wired to the ViewModel method it is named after.
+ *
+ * ## What this covers that no other test can
+ *
+ * `ConverterScreenContentTest`, `ConverterStateAffordancesTest` and `JoinScreenContentTest` all
+ * drive the **stateless** content composables, which build their own `ConverterActions`. So the
+ * wiring — the list of `viewModel::` references the stateful outer hands down — was seen by nothing
+ * in the suite.
+ *
+ * ## The hazard is narrower than "seventeen bindings", and this says so
+ *
+ * #156 was filed claiming a transposition of any two bindings would survive the suite. That is not
+ * true, and it was worth checking rather than testing on the assumption:
+ *
+ * | swap | result |
+ * |---|---|
+ * | `onVideoCodec` ↔ `onAudioCodec` | **rejected by the compiler** |
+ * | `onCancel` ↔ `onReset` | **compiles** |
+ *
+ * Every typed binding — container, both codecs, preset, suggestion, quality, engine preference —
+ * takes a distinct parameter type, so the compiler is already the test. Writing assertions for
+ * those would be theatre.
+ *
+ * **The `() -> Unit` bindings are the real gap**, because they are interchangeable to the compiler:
+ * two on the converter screen (`onCancel`, `onReset`) and three on the join screen (`onJoin`,
+ * `onCancel`, `onReset`). A Cancel that discards the finished file, or a Join that cancels, is a
+ * one-character mistake that ships.
+ *
+ * ## How they are told apart
+ *
+ * By effect, not by a recording double. `reset()` sets the state to `Idle`; `cancel()` with no
+ * active job leaves it alone (`ConversionViewModel.cancel` is `activeWorkId?.let(...)`, and
+ * `SettingsEditsTest` pins that). Driving each from a non-`Idle` state is therefore enough to say
+ * which one ran.
+ */
+@UnstableApi
+@RunWith(RobolectricTestRunner::class)
+class ScreenWiringTest {
+
+    private lateinit var app: Application
+
+    @Before
+    fun setUp() {
+        app = RuntimeEnvironment.getApplication()
+        ConversionDependencies.publisher = { RecordingPublisher(app) }
+        ConversionDependencies.probe = { _, _ -> org.libremediaconverter.model.InputProbe() }
+    }
+
+    @After
+    fun tearDown() {
+        ConversionDependencies.reset()
+    }
+
+    // --- the converter screen ----------------------------------------------
+
+    @Test
+    fun `Start over resets, and Cancel does not`() {
+        // The transposition that compiles. If onReset were bound to cancel, this stays on Ready.
+        installTestWorkManager(app, Data.EMPTY)
+        val pick = ParkedPickDispatcher()
+        val viewModel = ConversionViewModel(app, pickDispatcher = pick)
+        val actions = converterActions(viewModel, onPickInput = {}, onConvert = {}, onSave = {})
+        viewModel.onInputPicked(INPUT_URI)
+        pick.runAll()
+        assertNotEquals(
+            "the fixture needs a non-Idle state or neither action is observable",
+            ConversionState.Idle,
+            viewModel.state.value,
+        )
+
+        actions.onReset()
+
+        assertEquals(ConversionState.Idle, viewModel.state.value)
+    }
+
+    @Test
+    fun `Cancel leaves the picked file on screen`() {
+        // The other half. Without it, a wiring with BOTH actions bound to reset passes the test
+        // above -- and that is exactly what a copy-paste of the wrong line produces.
+        installTestWorkManager(app, Data.EMPTY)
+        val pick = ParkedPickDispatcher()
+        val viewModel = ConversionViewModel(app, pickDispatcher = pick)
+        val actions = converterActions(viewModel, onPickInput = {}, onConvert = {}, onSave = {})
+        viewModel.onInputPicked(INPUT_URI)
+        pick.runAll()
+        val before = viewModel.state.value
+
+        actions.onCancel()
+
+        assertEquals(
+            "Cancel must not throw away the pick the way Start over does",
+            before,
+            viewModel.state.value,
+        )
+    }
+
+    @Test
+    fun `each settings affordance reaches the setting it is named after`() {
+        // The typed bindings. The compiler already rejects a transposition among these, so this is
+        // not that assertion -- it is the cheaper one that each is bound to *something*, and that a
+        // binding dropped to `{}` during an edit would be caught.
+        installTestWorkManager(app, Data.EMPTY)
+        val pick = ParkedPickDispatcher()
+        val viewModel = ConversionViewModel(app, pickDispatcher = pick)
+        val actions = converterActions(viewModel, onPickInput = {}, onConvert = {}, onSave = {})
+
+        actions.onPreset(OutputFormat.WEBM_VP9)
+        assertEquals(OutputFormat.WEBM_VP9.spec, viewModel.settings.value.spec)
+
+        actions.onContainer(Container.MKV)
+        assertEquals(Container.MKV, viewModel.settings.value.spec.container)
+
+        actions.onVideoCodec(VideoCodec.H264)
+        assertEquals(VideoCodec.H264, viewModel.settings.value.spec.videoCodec)
+
+        actions.onAudioCodec(AudioCodec.FLAC)
+        assertEquals(AudioCodec.FLAC, viewModel.settings.value.spec.audioCodec)
+
+        actions.onQuality(QualityTier.BEST)
+        assertEquals(QualityTier.BEST, viewModel.settings.value.quality)
+
+        actions.onEnginePreference(EnginePreference.FORCE_SOFTWARE)
+        assertEquals(EnginePreference.FORCE_SOFTWARE, viewModel.settings.value.enginePreference)
+
+        actions.onSuggestion(OutputFormat.MP4_H264.spec)
+        assertEquals(OutputFormat.MP4_H264.spec, viewModel.settings.value.spec)
+    }
+
+    @Test
+    fun `the launcher-backed actions are the ones the screen supplies`() {
+        // Not wired to the ViewModel at all, deliberately -- they need an ActivityResultLauncher.
+        // Asserted so that a later edit routing one of them at the ViewModel is noticed.
+        installTestWorkManager(app, Data.EMPTY)
+        val pick = ParkedPickDispatcher()
+        val viewModel = ConversionViewModel(app, pickDispatcher = pick)
+        val called = mutableListOf<String>()
+        val actions = converterActions(
+            viewModel,
+            onPickInput = { called += "pick" },
+            onConvert = { called += "convert" },
+            onSave = { called += "save:$it" },
+        )
+
+        actions.onPickInput()
+        actions.onConvert()
+        actions.onSave("holiday.mp4")
+
+        assertEquals(listOf("pick", "convert", "save:holiday.mp4"), called)
+    }
+
+    // --- the join screen, where three are interchangeable -------------------
+
+    @Test
+    fun `Start over resets the join, and Cancel does not`() {
+        installTestWorkManager(app, workDataOf(ConcatWorker.KEY_OUTPUT_PATH to "/dev/null"))
+        val pick = ParkedPickDispatcher()
+        val viewModel = JoinViewModel(app, pickDispatcher = pick)
+        val actions = joinActions(viewModel, onPickInputs = {}, onSave = {})
+        viewModel.onInputsPicked(TWO_INPUTS)
+        pick.runAll()
+        assertTrue(
+            "the fixture needs a non-Idle state: ${viewModel.state.value}",
+            viewModel.state.value !is JoinState.Idle,
+        )
+
+        actions.onReset()
+
+        assertEquals(JoinState.Idle, viewModel.state.value)
+    }
+
+    @Test
+    fun `Cancel leaves the picked files on screen`() {
+        installTestWorkManager(app, workDataOf(ConcatWorker.KEY_OUTPUT_PATH to "/dev/null"))
+        val pick = ParkedPickDispatcher()
+        val viewModel = JoinViewModel(app, pickDispatcher = pick)
+        val actions = joinActions(viewModel, onPickInputs = {}, onSave = {})
+        viewModel.onInputsPicked(TWO_INPUTS)
+        pick.runAll()
+        val before = viewModel.state.value
+
+        actions.onCancel()
+
+        assertEquals(before, viewModel.state.value)
+    }
+
+    @Test
+    fun `Join starts the job rather than cancelling or resetting it`() {
+        // The third of the join screen's interchangeable trio, and the one whose transposition is
+        // worst: a Join button bound to cancel does nothing at all, which reads as a dead button.
+        installTestWorkManager(app, workDataOf(ConcatWorker.KEY_OUTPUT_PATH to "/dev/null"))
+        val pick = ParkedPickDispatcher()
+        val viewModel = JoinViewModel(app, pickDispatcher = pick)
+        val actions = joinActions(viewModel, onPickInputs = {}, onSave = {})
+        viewModel.onInputsPicked(TWO_INPUTS)
+        pick.runAll()
+
+        actions.onJoin()
+
+        assertTrue(
+            "Join must leave Ready for a running state, not sit still and not go Idle: " +
+                "${viewModel.state.value}",
+            viewModel.state.value is JoinState.Joining || viewModel.state.value is JoinState.Joined,
+        )
+    }
+
+    private companion object {
+        val INPUT_URI: Uri = Uri.parse("content://test/holiday.mov")
+        val TWO_INPUTS = listOf(
+            Uri.parse("content://test/a.mp4"),
+            Uri.parse("content://test/b.mp4"),
+        )
+    }
+}

app/src/test/java/org/libremediaconverter/convert/SettingsEditsTest.kt

@@ -0,0 +1,197 @@
+package org.libremediaconverter.convert
+
+import android.app.Application
+import androidx.media3.common.util.UnstableApi
+import androidx.work.Data
+import org.junit.After
+import org.junit.Assert.assertEquals
+import org.junit.Assert.assertNotEquals
+import org.junit.Assert.assertNull
+import org.junit.Before
+import org.junit.Test
+import org.junit.runner.RunWith
+import org.libremediaconverter.model.AudioCodec
+import org.libremediaconverter.model.Container
+import org.libremediaconverter.model.EnginePreference
+import org.libremediaconverter.model.OutputFormat
+import org.libremediaconverter.model.QualityTier
+import org.libremediaconverter.model.VideoCodec
+import org.robolectric.RobolectricTestRunner
+import org.robolectric.RuntimeEnvironment
+
+/**
+ * The seven one-line edits the settings sheet makes, and what each one leaves alone.
+ *
+ * ## Why these needed a file of their own
+ *
+ * `setPreset` was covered. The six beside it — `setContainer`, `setVideoCodec`, `setAudioCodec`,
+ * `applySuggestion`, `setQuality`, `setEnginePreference` — and `cancel()` had **no coverage at
+ * all**, which is the tell: they are reachable from the JVM suite by exactly the route `setPreset`
+ * already takes, and nothing had asked.
+ *
+ * ## What is actually being asserted
+ *
+ * Not "the setter sets something". Each of these copies into a nested `OutputSpec`, so the failure
+ * worth catching is **a setter that writes the right value into the wrong field, or that rebuilds
+ * the spec and silently discards the other two**. So every test here asserts the field it changed
+ * *and* that the rest of the spec survived — a `setContainer` implemented as
+ * `it.copy(spec = OutputFormat.MP4_H265.spec.copy(container = container))` would pass a test that
+ * only checked the container.
+ *
+ * `ConverterScreenContentTest` cannot cover this: it builds `ConverterActions` itself and never
+ * touches the ViewModel. That the *screen* calls these is #156's, and neither implies the other.
+ */
+@UnstableApi
+@RunWith(RobolectricTestRunner::class)
+class SettingsEditsTest {
+
+    private lateinit var app: Application
+    private lateinit var viewModel: ConversionViewModel
+
+    @Before
+    fun setUp() {
+        app = RuntimeEnvironment.getApplication()
+        installTestWorkManager(app, Data.EMPTY)
+        viewModel = ConversionViewModel(app)
+    }
+
+    @After
+    fun tearDown() {
+        ConversionDependencies.reset()
+    }
+
+    @Test
+    fun `choosing a preset replaces the whole spec`() {
+        viewModel.setPreset(OutputFormat.WEBM_VP9)
+
+        assertEquals(OutputFormat.WEBM_VP9.spec, viewModel.settings.value.spec)
+    }
+
+    @Test
+    fun `changing the container leaves both codecs alone`() {
+        // Moved off the default spec first, and that is load-bearing rather than tidiness. The
+        // default IS `OutputFormat.MP4_H265.spec`, so a `setContainer` that rebuilt the spec from
+        // that preset instead of from the current one produced an identical answer and the
+        // mutation went green. Editing the codecs away from the default first is what makes
+        // "the other two survived" an assertion rather than a coincidence.
+        viewModel.setPreset(OutputFormat.WEBM_VP9)
+        val before = viewModel.settings.value.spec
+
+        viewModel.setContainer(Container.MKV)
+
+        val after = viewModel.settings.value.spec
+        assertEquals(Container.MKV, after.container)
+        assertEquals("the video codec is not the container's to change", before.videoCodec, after.videoCodec)
+        assertEquals("the audio codec is not the container's to change", before.audioCodec, after.audioCodec)
+    }
+
+    @Test
+    fun `changing the video codec leaves the container and the audio codec alone`() {
+        // The transposition this guards against is real: setVideoCodec and setAudioCodec take
+        // different enum types, but a copy(...) naming the wrong field compiles wherever the types
+        // happen to line up, and the picker would silently set the other one.
+        val before = viewModel.settings.value.spec
+
+        viewModel.setVideoCodec(VideoCodec.VP9)
+
+        val after = viewModel.settings.value.spec
+        assertEquals(VideoCodec.VP9, after.videoCodec)
+        assertEquals(before.container, after.container)
+        assertEquals(before.audioCodec, after.audioCodec)
+    }
+
+    @Test
+    fun `changing the audio codec leaves the container and the video codec alone`() {
+        val before = viewModel.settings.value.spec
+
+        viewModel.setAudioCodec(AudioCodec.OPUS)
+
+        val after = viewModel.settings.value.spec
+        assertEquals(AudioCodec.OPUS, after.audioCodec)
+        assertEquals(before.container, after.container)
+        assertEquals(before.videoCodec, after.videoCodec)
+    }
+
+    @Test
+    fun `applying a suggestion replaces the spec without disturbing quality or engine`() {
+        // A suggestion comes from ContainerCapabilities when the current spec is invalid, so it is
+        // a whole spec by construction. What it must not do is reset the two settings beside it.
+        viewModel.setQuality(QualityTier.BEST)
+        viewModel.setEnginePreference(EnginePreference.FORCE_SOFTWARE)
+
+        viewModel.applySuggestion(OutputFormat.MKV_H264.spec)
+
+        val settings = viewModel.settings.value
+        assertEquals(OutputFormat.MKV_H264.spec, settings.spec)
+        assertEquals(QualityTier.BEST, settings.quality)
+        assertEquals(EnginePreference.FORCE_SOFTWARE, settings.enginePreference)
+    }
+
+    @Test
+    fun `changing the quality leaves the spec and the engine preference alone`() {
+        // Both neighbours are moved off their defaults first. Asserting against AUTO -- which is
+        // what `ConversionSettings` starts with -- let a `setQuality` that also reset the engine
+        // preference to AUTO pass, because the reset and the survival looked identical.
+        viewModel.setPreset(OutputFormat.WEBM_VP9)
+        viewModel.setEnginePreference(EnginePreference.FORCE_SOFTWARE)
+        val before = viewModel.settings.value.spec
+
+        viewModel.setQuality(QualityTier.BEST)
+
+        val settings = viewModel.settings.value
+        assertEquals(QualityTier.BEST, settings.quality)
+        assertEquals(before, settings.spec)
+        assertEquals(
+            "quality is not the engine preference's to change",
+            EnginePreference.FORCE_SOFTWARE,
+            settings.enginePreference,
+        )
+    }
+
+    @Test
+    fun `changing the engine preference leaves the spec and the quality alone`() {
+        // Off the defaults for the same reason as the test above: QualityTier.FAST is the starting
+        // value, so asserting it here would have been satisfied by a reset as readily as by a
+        // survival.
+        viewModel.setPreset(OutputFormat.WEBM_VP9)
+        viewModel.setQuality(QualityTier.BEST)
+        val before = viewModel.settings.value.spec
+
+        viewModel.setEnginePreference(EnginePreference.FORCE_SOFTWARE)
+
+        val settings = viewModel.settings.value
+        assertEquals(EnginePreference.FORCE_SOFTWARE, settings.enginePreference)
+        assertEquals(before, settings.spec)
+        assertEquals(
+            "the engine preference is not the quality's to change",
+            QualityTier.BEST,
+            settings.quality,
+        )
+    }
+
+    @Test
+    fun `editing past every preset leaves no matching preset`() {
+        // `matchingPreset` is what the settings sheet reads to decide whether to show a preset as
+        // selected or to say "Custom". Editing one field of a preset must drop it out of the list
+        // rather than leaving the old one highlighted.
+        viewModel.setPreset(OutputFormat.MP4_H265)
+        assertEquals(OutputFormat.MP4_H265, viewModel.settings.value.matchingPreset)
+
+        viewModel.setAudioCodec(AudioCodec.FLAC)
+
+        assertNull(
+            "an edited spec is no longer any preset, and the sheet says Custom",
+            viewModel.settings.value.matchingPreset,
+        )
+        assertNotEquals(OutputFormat.MP4_H265.spec, viewModel.settings.value.spec)
+    }
+
+    @Test
+    fun `cancelling with no active job does nothing rather than throwing`() {
+        // `activeWorkId?.let(...)` -- the null side. A user can reach Cancel through a state that
+        // has already finished, and taking the app down for it would be worse than doing nothing.
+        viewModel.cancel()
+
+        assertEquals(ConversionState.Idle, viewModel.state.value)
+    }
+}

app/src/test/java/org/libremediaconverter/join/JoinStateMappingTest.kt

@@ -0,0 +1,200 @@
+package org.libremediaconverter.join
+
+import android.net.Uri
+import androidx.media3.common.util.UnstableApi
+import androidx.work.Data
+import androidx.work.WorkInfo
+import androidx.work.workDataOf
+import org.junit.Assert.assertEquals
+import org.junit.Test
+import org.junit.runner.RunWith
+import org.libremediaconverter.convert.InputFile
+import org.libremediaconverter.model.ConcatStrategy
+import org.libremediaconverter.work.ConcatWorker
+import org.robolectric.RobolectricTestRunner
+
+/**
+ * Every answer [joinStateFrom] can give, chosen rather than stumbled into.
+ *
+ * The join-side twin of `ConversionStateMappingTest`, and the argument is the same one: the mapping
+ * ran on every test that drove a real `ConcatWorker`, but a real worker only ever reaches a terminal
+ * state with well-formed output, so five arms had never been *chosen* by anything.
+ *
+ * ## The one that is not just coverage
+ *
+ * `an unknown strategy name is read as a re-encode rather than thrown` covers a real defect this
+ * seam exposed. The line it replaces was:
+ *
+ * ```kotlin
+ * .getString(ConcatWorker.KEY_STRATEGY)?.let(ConcatStrategy::valueOf) ?: ConcatStrategy.REENCODE
+ * ```
+ *
+ * `valueOf` throws on a name this build does not define, and this runs inside a `viewModelScope`
+ * collect with no handler — so it does not become a `Failed` state, it takes the process down.
+ * `ConcatWorker.kt` had already made this exact change for `KEY_FORMAT` and written down why; the
+ * matching read on this side had not been changed with it.
+ */
+@UnstableApi
+@RunWith(RobolectricTestRunner::class)
+class JoinStateMappingTest {
+
+    @Test
+    fun `a running join is joining`() {
+        assertEquals(JoinState.Joining(INPUTS), map(WorkInfo.State.RUNNING))
+    }
+
+    @Test
+    fun `a blocked join looks like one that is starting`() {
+        // Folded into the RUNNING arm deliberately: a job waiting on a prerequisite is nothing the
+        // user can act on, and a separate word for it would be noise.
+        assertEquals(JoinState.Joining(INPUTS), map(WorkInfo.State.BLOCKED))
+    }
+
+    @Test
+    fun `an enqueued join that has already run is waiting to retry`() {
+        assertEquals(JoinState.Waiting(INPUTS), map(WorkInfo.State.ENQUEUED, runAttemptCount = 1))
+    }
+
+    @Test
+    fun `an enqueued join that has never run is simply starting`() {
+        // The other side. Without it, a mapping that ignored runAttemptCount passes the test above.
+        assertEquals(JoinState.Joining(INPUTS), map(WorkInfo.State.ENQUEUED, runAttemptCount = 0))
+    }
+
+    @Test
+    fun `a success that named no file is a failure, not an empty success`() {
+        assertEquals(
+            JoinState.Failed(JOINED_WITHOUT_A_FILE_MESSAGE),
+            map(WorkInfo.State.SUCCEEDED, data = Data.EMPTY),
+        )
+    }
+
+    @Test
+    fun `a success carries the strategy the worker actually used`() {
+        // Not cosmetic: the join screen tells the user whether their files were stream-copied or
+        // re-encoded, which is the difference between lossless and lossy.
+        val joined = map(
+            WorkInfo.State.SUCCEEDED,
+            data = workDataOf(
+                ConcatWorker.KEY_OUTPUT_PATH to "/cache/conversions/joined.mp4",
+                ConcatWorker.KEY_STRATEGY to ConcatStrategy.STREAM_COPY.name,
+            ),
+        ) as JoinState.Joined
+
+        assertEquals(ConcatStrategy.STREAM_COPY, joined.strategy)
+    }
+
+    @Test
+    fun `an unknown strategy name is read as a re-encode rather than thrown`() {
+        // The defect. A build that added a third strategy leaves finished joins in the queue naming
+        // it, and WorkManager keeps those about a week -- the premise WorkerEnumFallbackTest and
+        // JobTags are both written on. With `valueOf` this throws IllegalArgumentException inside a
+        // viewModelScope collect that has no handler, so it is not a Failed state, it is a crash.
+        //
+        // REENCODE rather than STREAM_COPY because it is the conservative answer: describing an
+        // unknown join as lossless would be a claim the app cannot support.
+        val joined = map(
+            WorkInfo.State.SUCCEEDED,
+            data = workDataOf(
+                ConcatWorker.KEY_OUTPUT_PATH to "/cache/conversions/joined.mp4",
+                ConcatWorker.KEY_STRATEGY to "SMART_CONCAT_V2",
+            ),
+        ) as JoinState.Joined
+
+        assertEquals(ConcatStrategy.REENCODE, joined.strategy)
+    }
+
+    @Test
+    fun `a success with no strategy at all falls back the same way`() {
+        val joined = map(
+            WorkInfo.State.SUCCEEDED,
+            data = workDataOf(ConcatWorker.KEY_OUTPUT_PATH to "/cache/conversions/joined.mp4"),
+        ) as JoinState.Joined
+
+        assertEquals(ConcatStrategy.REENCODE, joined.strategy)
+    }
+
+    @Test
+    fun `a success from older work falls back to the format such a job really used`() {
+        val joined = map(
+            WorkInfo.State.SUCCEEDED,
+            data = workDataOf(ConcatWorker.KEY_OUTPUT_PATH to "/cache/conversions/joined.mp4"),
+        ) as JoinState.Joined
+
+        assertEquals(ConcatWorker.outputNameFor(ConcatWorker.DEFAULT_FORMAT), joined.suggestedName)
+        assertEquals(ConcatWorker.DEFAULT_FORMAT.mimeType, joined.mimeType)
+    }
+
+    @Test
+    fun `a blank name or type falls back the same way a missing one does`() {
+        val joined = map(
+            WorkInfo.State.SUCCEEDED,
+            data = workDataOf(
+                ConcatWorker.KEY_OUTPUT_PATH to "/cache/conversions/joined.mp4",
+                ConcatWorker.KEY_SUGGESTED_NAME to "",
+                ConcatWorker.KEY_MIME_TYPE to "  ",
+            ),
+        ) as JoinState.Joined
+
+        assertEquals(ConcatWorker.outputNameFor(ConcatWorker.DEFAULT_FORMAT), joined.suggestedName)
+        assertEquals(ConcatWorker.DEFAULT_FORMAT.mimeType, joined.mimeType)
+    }
+
+    @Test
+    fun `a failure carries the reason the worker gave`() {
+        assertEquals(
+            JoinState.Failed("Not enough free space to join these files."),
+            map(
+                WorkInfo.State.FAILED,
+                data = workDataOf(
+                    ConcatWorker.KEY_ERROR to "Not enough free space to join these files.",
+                ),
+            ),
+        )
+    }
+
+    @Test
+    fun `a failure with nothing said still says something`() {
+        assertEquals(
+            JoinState.Failed(ConcatWorker.GENERIC_FAILURE_MESSAGE),
+            map(WorkInfo.State.FAILED, data = Data.EMPTY),
+        )
+    }
+
+    @Test
+    fun `a failure whose message is blank falls back like a missing one`() {
+        assertEquals(
+            JoinState.Failed(ConcatWorker.GENERIC_FAILURE_MESSAGE),
+            map(WorkInfo.State.FAILED, data = workDataOf(ConcatWorker.KEY_ERROR to " ")),
+        )
+    }
+
+    @Test
+    fun `a cancellation lands wherever the caller said it should`() {
+        // A join started here goes back to Ready with the picked files; one picked up by reattach
+        // goes to Idle, because those URIs belong to a process that no longer exists.
+        assertEquals(
+            JoinState.Ready(INPUTS),
+            map(WorkInfo.State.CANCELLED, cancelled = JoinState.Ready(INPUTS)),
+        )
+        assertEquals(JoinState.Idle, map(WorkInfo.State.CANCELLED, cancelled = JoinState.Idle))
+    }
+
+    private fun map(
+        state: WorkInfo.State,
+        runAttemptCount: Int = 0,
+        data: Data = Data.EMPTY,
+        cancelled: JoinState = JoinState.Ready(INPUTS),
+    ): JoinState = joinStateFrom(
+        JoinUpdate(state = state, runAttemptCount = runAttemptCount, outputData = data),
+        inputs = INPUTS,
+        cancelled = cancelled,
+    )
+
+    private companion object {
+        val INPUTS = listOf(
+            InputFile(Uri.parse("content://test/a.mp4"), "a.mp4", 1024L),
+            InputFile(Uri.parse("content://test/b.mp4"), "b.mp4", 2048L),
+        )
+    }
+}

app/src/test/java/org/libremediaconverter/work/ForegroundTypeRegimeTest.kt

@@ -0,0 +1,88 @@
+package org.libremediaconverter.work
+
+import android.content.pm.ServiceInfo
+import org.junit.Assert.assertEquals
+import org.junit.Test
+import org.junit.runner.RunWith
+import org.robolectric.RobolectricTestRunner
+import org.robolectric.annotation.Config
+
+/**
+ * [ConversionForegroundType.current] answers differently on each of the three API regimes, and
+ * until this file only one of them was ever executed.
+ *
+ * `app/src/test/resources/robolectric.properties` pins the whole JVM suite to `sdk=36`, so every
+ * Robolectric test that reaches a `ForegroundInfo` takes the `mediaProcessing` arm and no other.
+ * The 33 and 34 arms were cold: 3 lines and 3 of 4 branches, measured on `main` at `d354f64`.
+ *
+ * **The instrumented test is not a substitute, and the reason is specific.**
+ * `ConversionWorkerTest.foregroundTypeMatchesTheRunningApiLevel` asserts against whichever API the
+ * leg happens to be — one arm per leg, never the other two — and the legs that would cover 33 and
+ * 34 are the ones issue #122 wedges. `docs/coverage-read-findings.md` records an API 33 run that
+ * reported `received: 60` and `failed: unknown`: the regime *was* exercised, and that leg could
+ * not have said so if it had broken. Four `@Config` classes here pin all three arms
+ * deterministically, in the same `./gradlew` invocation as everything else.
+ *
+ * `minSdk` is 33, so none of these is dead code — each is a device someone is running the app on.
+ *
+ * **SDK 35 is in the list for the boundary, not for the answer.** It shares its answer with 36,
+ * which would make it look redundant. It is not: relaxing `>= VANILLA_ICE_CREAM` to `>` is invisible
+ * at every level except exactly 35, so without this class that mutation survives the suite.
+ */
+@RunWith(RobolectricTestRunner::class)
+@Config(sdk = [33])
+class ForegroundTypeApi33Test {
+
+    /**
+     * Zero rather than a named constant because there is no constant to name: API 33 does not
+     * require a type, and `mediaProcessing` does not exist here to pass. `ForegroundInfo` reads 0
+     * as "no type at all", which is what this regime wants.
+     */
+    @Test
+    fun `api 33 asks for no foreground service type`() {
+        assertEquals(0, ConversionForegroundType.current())
+    }
+}
+
+/**
+ * API 34 makes a type mandatory and still has no `mediaProcessing`, so `dataSync` is the only
+ * sensible fit. See [ForegroundTypeApi33Test] for why this file exists.
+ */
+@RunWith(RobolectricTestRunner::class)
+@Config(sdk = [34])
+class ForegroundTypeApi34Test {
+
+    @Test
+    fun `api 34 falls back to dataSync, the only type that fits`() {
+        assertEquals(ServiceInfo.FOREGROUND_SERVICE_TYPE_DATA_SYNC, ConversionForegroundType.current())
+    }
+}
+
+/**
+ * The first level with `mediaProcessing`, and therefore the one that tells `>=` from `>`.
+ * See [ForegroundTypeApi33Test].
+ */
+@RunWith(RobolectricTestRunner::class)
+@Config(sdk = [35])
+class ForegroundTypeApi35Test {
+
+    @Test
+    fun `api 35 is the first level that takes mediaProcessing`() {
+        assertEquals(ServiceInfo.FOREGROUND_SERVICE_TYPE_MEDIA_PROCESSING, ConversionForegroundType.current())
+    }
+}
+
+/**
+ * The level the rest of the suite runs at, asserted here rather than assumed — it is the one arm
+ * that was already covered, and leaving it out would make this file look like it is about the old
+ * levels rather than about all three regimes. See [ForegroundTypeApi33Test].
+ */
+@RunWith(RobolectricTestRunner::class)
+@Config(sdk = [36])
+class ForegroundTypeApi36Test {
+
+    @Test
+    fun `api 36 keeps mediaProcessing`() {
+        assertEquals(ServiceInfo.FOREGROUND_SERVICE_TYPE_MEDIA_PROCESSING, ConversionForegroundType.current())
+    }
+}