55 lines
2.4 KiB
Plaintext
55 lines
2.4 KiB
Plaintext
|
|
Redshift 0.3
|
|
============
|
|
|
|
Adjust color temperature of your screen according to your
|
|
surroundings. This may help your eyes hurt less if you are working in
|
|
front of the screen at night.
|
|
|
|
The program uses an X server extension adjust the color
|
|
temperature. This is done by setting appropriate gamma ramps. If you
|
|
have configured your own gamma ramps they will be overwritten but in
|
|
that case you probably care too much about color accuracy to use this
|
|
program anyway. Your graphics driver and X server needs to either
|
|
support at least RANDR version 1.3 or the VidMode extension.
|
|
|
|
The color temperature is set according to the position of the sun. A
|
|
different color temperature is set during night and daytime. During
|
|
twilight and early morning, the color temperature transitions smoothly
|
|
from night to daytime temperature to allow your eyes to slowly
|
|
adapt. At night the color temperature should be set to match the lamps in your
|
|
room. This is typically a low temperature at around 3000K-4000K
|
|
(default is 3700K). During the day, the color temperature should match
|
|
the light from outside, typically around 5500K-6500K (default is
|
|
5500K). The light has a higher temperature on an overcast day.
|
|
|
|
The program will continously update the color temperature at regular
|
|
intervals. One shot mode can be selected if you only want to do one
|
|
adjustment.
|
|
|
|
The command line options are explained in the following paragrphs. The
|
|
only required parameter is your current location, all other options
|
|
have reasonable defaults.
|
|
|
|
-g R:G:B Additional gamma correction to apply. Can also be
|
|
specified as -g GAMMA to set all channels to the same
|
|
gamma value.
|
|
-h Display help message.
|
|
-l LAT:LON Your current location in latitudes and longitudes.
|
|
-m METHOD Method to use to set color temperature (randr or
|
|
vidmode). Default is randr. In some cases one of the
|
|
methods will not work. In that case you may be able to
|
|
use the other method.
|
|
-o One shot mode. Do not continously adjust color
|
|
temperature.
|
|
-r Disable initial temperature transition. By default the
|
|
program will make a smooth transition to the desired
|
|
color temperature when the program is started.
|
|
-s SCREEN X screen to apply adjustments to.
|
|
-t DAY:NIGHT Color temperature to set at daytime/night.
|
|
-v Verbose output.
|
|
|
|
Example (location is Copenhagen, Denmark):
|
|
|
|
$ redshift -l 55.7:12.6 -t 6800:3500 -g 0.8 -m vidmode -v
|