ReLibreHardwareMonitor

AbstractHarddrive.cs

Added a new sensor type "Factor" for dimensionless values (and similar) that are not to be shown as percent ("Level" type). Changed the write amplification sensor to use the new "Factor" sensor type. Added the temperature SMART attribute for Sandforce SSDs as hidden sensor (as it may show fake results on some hardware).

2012-02-14 23:07:55 +00:00

DebugSmart.cs

Small correction to the Sandforce SSD detection to prevent Marvell controllers (M4, C300) from getting identified as Sandforce.

2012-02-13 20:34:39 +00:00

DriveAttributeValue.cs

Modified and extended version of the patch v4 by Roland Reinl (see Issue 256). Main differences to the original patch: DeviceIoControl refactorings removed, SmartAttribute is now descriptive only and does not hold any state, report is written as one 80 columns table, sensors are created only for meaningful values and without duplicates (remaining life, temperatures, host writes and reads). Also the current implementation should really preserve all the functionality of the old system. Additionally there is now a simple SMART devices emulation class (DebugSmart) that can be used in place of WindowsSmart for testing with reported data.

2011-12-31 17:31:04 +00:00

DriveThresholdValue.cs

Modified and extended version of the patch v4 by Roland Reinl (see Issue 256). Main differences to the original patch: DeviceIoControl refactorings removed, SmartAttribute is now descriptive only and does not hold any state, report is written as one 80 columns table, sensors are created only for meaningful values and without duplicates (remaining life, temperatures, host writes and reads). Also the current implementation should really preserve all the functionality of the old system. Additionally there is now a simple SMART devices emulation class (DebugSmart) that can be used in place of WindowsSmart for testing with reported data.

2011-12-31 17:31:04 +00:00

HarddriveGroup.cs

Modified and extended version of the patch v4 by Roland Reinl (see Issue 256). Main differences to the original patch: DeviceIoControl refactorings removed, SmartAttribute is now descriptive only and does not hold any state, report is written as one 80 columns table, sensors are created only for meaningful values and without duplicates (remaining life, temperatures, host writes and reads). Also the current implementation should really preserve all the functionality of the old system. Additionally there is now a simple SMART devices emulation class (DebugSmart) that can be used in place of WindowsSmart for testing with reported data.

2011-12-31 17:31:04 +00:00

HDDGeneric.cs

Added SMART support for Samsung SSDs.

2012-01-02 18:44:19 +00:00

ISmart.cs

Added the hard drive firmware version to the report. This could be important if the SMART attribute layout changes with firmware versions on some drives.

2012-01-01 10:14:42 +00:00

NamePrefixAttribute.cs

Modified and extended version of the patch v4 by Roland Reinl (see Issue 256). Main differences to the original patch: DeviceIoControl refactorings removed, SmartAttribute is now descriptive only and does not hold any state, report is written as one 80 columns table, sensors are created only for meaningful values and without duplicates (remaining life, temperatures, host writes and reads). Also the current implementation should really preserve all the functionality of the old system. Additionally there is now a simple SMART devices emulation class (DebugSmart) that can be used in place of WindowsSmart for testing with reported data.

2011-12-31 17:31:04 +00:00

RequireSmartAttribute.cs

Modified and extended version of the patch v4 by Roland Reinl (see Issue 256). Main differences to the original patch: DeviceIoControl refactorings removed, SmartAttribute is now descriptive only and does not hold any state, report is written as one 80 columns table, sensors are created only for meaningful values and without duplicates (remaining life, temperatures, host writes and reads). Also the current implementation should really preserve all the functionality of the old system. Additionally there is now a simple SMART devices emulation class (DebugSmart) that can be used in place of WindowsSmart for testing with reported data.

2011-12-31 17:31:04 +00:00

SmartAttribute.cs

Added a new sensor type "Factor" for dimensionless values (and similar) that are not to be shown as percent ("Level" type). Changed the write amplification sensor to use the new "Factor" sensor type. Added the temperature SMART attribute for Sandforce SSDs as hidden sensor (as it may show fake results on some hardware).

2012-02-14 23:07:55 +00:00

SmartNames.cs

Added additional smart attribute identification and a write amplification sensor for Sandforce based SSDs.

2012-02-13 21:56:29 +00:00

SSDIndilinx.cs

Further restricted the identification for Indilinx SSDs to prevent Maxtor HDDs to be identified as Indilinx SSD.

2012-01-02 21:17:21 +00:00

SSDIntel.cs

Added SMART support for Samsung SSDs.

2012-01-02 18:44:19 +00:00

SSDPlextor.cs

Added SMART support for Samsung SSDs.

2012-01-02 18:44:19 +00:00

SSDSamsung.cs

Added SMART support for Samsung SSDs.

2012-01-02 18:44:19 +00:00

SSDSandforce.cs

Added a new sensor type "Factor" for dimensionless values (and similar) that are not to be shown as percent ("Level" type). Changed the write amplification sensor to use the new "Factor" sensor type. Added the temperature SMART attribute for Sandforce SSDs as hidden sensor (as it may show fake results on some hardware).

2012-02-14 23:07:55 +00:00

WindowsSmart.cs

Added the hard drive firmware version to the report. This could be important if the SMART attribute layout changes with firmware versions on some drives.

2012-01-01 10:14:42 +00:00