115 lines
4.8 KiB
C#
115 lines
4.8 KiB
C#
// This Source Code Form is subject to the terms of the Mozilla Public License, v. 2.0.
|
|
// If a copy of the MPL was not distributed with this file, You can obtain one at http://mozilla.org/MPL/2.0/.
|
|
// Copyright (C) LibreHardwareMonitor and Contributors.
|
|
// All Rights Reserved.
|
|
|
|
using System;
|
|
using HidSharp;
|
|
|
|
namespace LibreHardwareMonitor.Hardware.Controller.AquaComputer;
|
|
|
|
internal sealed class D5Next : Hardware
|
|
{
|
|
//Available Reports, found them by looking at the below methods
|
|
//var test = dev.GetRawReportDescriptor();
|
|
//var test2 = dev.GetReportDescriptor();
|
|
|
|
// ID 1; Length 158; INPUT
|
|
// ID 2; Length 11; OUTPUT
|
|
// ID 3; Length 1025; <-- works FEATURE
|
|
// ID 8; Length 1025; <-- works FEATURE
|
|
// ID 12; Length 1025; <-- 0xC FEATURE
|
|
|
|
private readonly byte[] _rawData = new byte[1025];
|
|
private readonly Sensor[] _rpmSensors = new Sensor[2];
|
|
private readonly HidStream _stream;
|
|
private readonly Sensor[] _temperatures = new Sensor[1];
|
|
private readonly Sensor[] _voltages = new Sensor[4];
|
|
private readonly Sensor[] _powers = new Sensor[2];
|
|
private readonly Sensor[] _flows = new Sensor[1];
|
|
private readonly Sensor[] _fanControl = new Sensor[2];
|
|
|
|
public D5Next(HidDevice dev, ISettings settings) : base("D5Next", new Identifier(dev), settings)
|
|
{
|
|
if (dev.TryOpen(out _stream))
|
|
{
|
|
//Reading output report instead of feature report, as the measurements are in the output report
|
|
_stream.Read(_rawData);
|
|
|
|
Name = "D5Next";
|
|
FirmwareVersion = Convert.ToUInt16(_rawData[14] | (_rawData[13] << 8));
|
|
_temperatures[0] = new Sensor("Water Temperature", 0, SensorType.Temperature, this, Array.Empty<ParameterDescription>(), settings);
|
|
ActivateSensor(_temperatures[0]);
|
|
|
|
_rpmSensors[0] = new Sensor("Pump", 0, SensorType.Fan, this, Array.Empty<ParameterDescription>(), settings);
|
|
ActivateSensor(_rpmSensors[0]);
|
|
|
|
_rpmSensors[1] = new Sensor("Fan", 1, SensorType.Fan, this, settings);
|
|
ActivateSensor(_rpmSensors[1]);
|
|
|
|
_voltages[0] = new Sensor("Fan Voltage", 0, SensorType.Voltage, this, settings);
|
|
ActivateSensor(_voltages[0]);
|
|
|
|
_voltages[1] = new Sensor("Pump Voltage", 1, SensorType.Voltage, this, settings);
|
|
ActivateSensor(_voltages[1]);
|
|
|
|
_voltages[2] = new Sensor("+5V Voltage", 2, SensorType.Voltage, this, settings);
|
|
ActivateSensor(_voltages[2]);
|
|
|
|
_voltages[3] = new Sensor("+12V Voltage", 3, SensorType.Voltage, this, settings);
|
|
ActivateSensor(_voltages[3]);
|
|
|
|
_powers[0] = new Sensor("Fan Power", 0, SensorType.Power, this, settings);
|
|
ActivateSensor(_powers[0]);
|
|
|
|
_powers[1] = new Sensor("Pump Power", 1, SensorType.Power, this, settings);
|
|
ActivateSensor(_powers[1]);
|
|
|
|
_flows[0] = new Sensor("Viritual Flow", 0, SensorType.Flow, this, settings);
|
|
ActivateSensor(_flows[0]);
|
|
|
|
_fanControl[0] = new Sensor("Fan Control", 0, SensorType.Control, this, settings);
|
|
ActivateSensor(_fanControl[0]);
|
|
|
|
_fanControl[1] = new Sensor("Pump Control", 1, SensorType.Control, this, settings);
|
|
ActivateSensor(_fanControl[1]);
|
|
}
|
|
}
|
|
|
|
public ushort FirmwareVersion { get; }
|
|
|
|
public override HardwareType HardwareType
|
|
{
|
|
get { return HardwareType.Cooler; }
|
|
}
|
|
|
|
public override void Close()
|
|
{
|
|
_stream.Close();
|
|
base.Close();
|
|
}
|
|
|
|
public override void Update()
|
|
{
|
|
//Reading output report instead of feature report, as the measurements are in the output report
|
|
_stream.Read(_rawData);
|
|
_temperatures[0].Value = (_rawData[88] | (_rawData[87] << 8)) / 100f; //Water Temp
|
|
_rpmSensors[0].Value = _rawData[117] | (_rawData[116] << 8); //Pump RPM
|
|
_rpmSensors[1].Value = ReadUInt16BE(_rawData, 103); //Fan RPM
|
|
_voltages[0].Value = ReadUInt16BE(_rawData, 97) / 100f; //Fan Voltage
|
|
_voltages[1].Value = ReadUInt16BE(_rawData, 110) / 100f; //Pump Voltage
|
|
_voltages[2].Value = ReadUInt16BE(_rawData, 57) / 100f; //+5V Voltage
|
|
_voltages[3].Value = ReadUInt16BE(_rawData, 55) / 100f; //+12V Voltage
|
|
_powers[0].Value = ReadUInt16BE(_rawData, 101) / 100f; //Fan Power Consumption
|
|
_powers[1].Value = ReadUInt16BE(_rawData, 114) / 100f; //Pump Power Consumption
|
|
_flows[0].Value = ReadUInt16BE(_rawData, 89) / 10f; // Viritual Flow
|
|
_fanControl[0].Value = ReadUInt16BE(_rawData, 95) / 100f; // Fan Control in % (0-100)
|
|
_fanControl[1].Value = ReadUInt16BE(_rawData, 108) / 100f; // Pump Control in % (0-100)
|
|
}
|
|
|
|
private ushort ReadUInt16BE(byte[] value, int startIndex)
|
|
{
|
|
return (ushort)(value[startIndex + 1] | (value[startIndex] << 8));
|
|
}
|
|
}
|